Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH "for Rough Cutting"

Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH "for Rough Cutting"

[Work materials]
· Carbon steel and alloy steel
[Insert Grade]
· CVD coating (CA515, CA525, CA5515, CA5525, CA5535)

Part Number

Configured Part Number is shown.

Part Number
CNMG190608PH-CA515
CNMG190608PH-CA525
CNMG190608PH-CA5515
CNMG190608PH-CA5525
CNMG190612PH-CA515
CNMG190612PH-CA5515
CNMG190612PH-CA5525
CNMG190612PH-CA5535
CNMG190616PH-CA515
CNMG190616PH-CA525
CNMG190616PH-CA5525
CNMG190616PH-CA5535
CNMG190624PH-CA515
CNMG190624PH-CA525
Part NumberVolume DiscountDays to ShipNose R Material
15 Day(s) or more 0.80.8CA515
13 Day(s) or more 0.80.8CA525
15 Day(s) or more 0.80.8CA5515
17 Day(s) or more 0.80.8CA5525
13 Day(s) or more 1.21.2CA515
Quote 1.21.2CA5515
17 Day(s) or more 1.21.2CA5525
Quote 1.21.2CA5535
Quote 1.61.6CA515
11 Day(s) or more 1.61.6CA525
Quote 1.61.6CA5525
17 Day(s) or more 1.61.6CA5535
11 Day(s) or more Others2.4CA515
13 Day(s) or more Others2.4CA525

Loading...

  1. 1

Basic Information

Shape C (80° Diamond) Application Outer Diameter / Inner Diameter Available corners 4
work material Steel Breaker Use Heavy Cutting Rake angle Negative
Selfishly No Preferred Hand

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)