(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Indexable Drill 3D Type P3D (P3D4050FS40M12)

Indexable Drill 3D Type P3D P3D4050FS40M12

Indexable drill that can stably perform hole drilling with 3D depth.

PDF

Part Number

Configured Part Number is shown.

P3D4050FS40M12

Recommended Cutting Conditions

Recommended cutting-conditions table

  • For this cutting condition, the rotational speed, feed rate and depth of cut are listed for each work material (general steel, steel alloy, heat-treated steel, high hardness steel, stainless steel, aluminum, cast iron, etc.) based on the manufacturer's recommended conditions.
  • The ideal machining conditions vary depending on the machining environment (machine tool, tool holder, etc.), so check and adjust the machining conditions (machining surface, chattering, etc.) before use.
Recommended cutting-conditions table of Indexable Drill Bit 3D Type P3D
Recommended cutting-conditions table of Indexable Drill Bit 3D Type P3D
Part Number
P3D4050FS40M12
Part NumberMinimum order quantityVolume DiscountDays to ShipHole Diameter (Drilling Diameter) D
(mm)
Overall Length (L)
(mm)
Link Diameter
(mm)
Effective Hole Drilling Depth
(mm)
Tool No. Nominal Link Length
(mm)
Maximum Processing Diameter
(mm)
1 Piece(s) 12 Day(s) or more 40.5222401227803308P3D4050FS40M127042.1

Loading...

  1. 1
 

Basic Information

Work Material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Tool Material Type Carbide Link Model End Mill Link
Coating Presence None Coating Type Non-Coated Oil-Hole Presence Included

Please check the type/dimensions/specifications of the part P3D4050FS40M12 in the Indexable Drill 3D Type P3D series.

Products like this...

Part Number
P3D2150FS25M07
P3D2200FS25M07
P3D2250FS25M07
P3D2300FS25M07
P3D2350FS32M07
P3D5050FS40M14
Part NumberMinimum order quantityVolume DiscountDays to ShipHole Diameter (Drilling Diameter) D
(mm)
Overall Length (L)
(mm)
Link Diameter
(mm)
Effective Hole Drilling Depth
(mm)
Tool No. Nominal Link Length
(mm)
Maximum Processing Diameter
(mm)
1 Piece(s) 12 Day(s) or more 21.514425657803230P3D2150FS25M075623.3
1 Piece(s) 12 Day(s) or more 2214525667803231P3D2200FS25M075623.6
1 Piece(s) 12 Day(s) or more 22.514725687803232P3D2250FS25M075623.9
1 Piece(s) 12 Day(s) or more 2314825697803233P3D2300FS25M075624
1 Piece(s) 12 Day(s) or more 23.515432717803234P3D2350FS32M076024.3
1 Piece(s) 12 Day(s) or more 50.5252401527803309P3D5050FS40M147052.5

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)