(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

CoroMill Plura - General Purpose End Mill for Rough Machining and Finish Machining 1P240-XA

CoroMill Plura - General Purpose End Mill for Rough Machining and Finish Machining 1P240-XA

High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

Part Number

Configured Part Number is shown.

Part Number
1P240-0200-XA-1630
1P240-0300-XA-1630
1P240-0350-XA-1630
1P240-0400-XA-1630
1P240-0450-XA-1630
1P240-0500-XA-1630
1P240-0550-XA-1630
1P240-0600-XA-1630
1P240-0650-XA-1630
1P240-0700-XA-1630
1P240-0800-XA-1630
1P240-0900-XA-1630
1P240-1000-XA-1630
1P240-1200-XA-1630
1P240-1400-XA-1630
1P240-1600-XA-1630
1P240-1800-XA-1630
1P240-2000-XA-1630
1P240-2500-XA-1630
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Usable length
(mm)
Shank Type Specifications Main body half taper angle
(°)
Corner Chamfer Corner Chamfer Width
1 Piece(s) 8 Day(s) or more 27.56577.50Cylindrical shankSquare, center cut30--
1 Piece(s) 8 Day(s) or more 38.56578.50Cylindrical shankSquare, center cut3045°0.080
1 Piece(s) 8 Day(s) or more 3.510.565710.50Cylindrical shankSquare, center cut3045°0.080
1 Piece(s) 8 Day(s) or more 411.565711.50Cylindrical shankSquare, center cut3045°0.130
1 Piece(s) 8 Day(s) or more 4.511.565711.50Cylindrical ShankSquare, Center Cut3045°0.130
1 Piece(s) 8 Day(s) or more 513.565713.50Cylindrical ShankSquare, Center Cut3045°0.130
1 Piece(s) 8 Day(s) or more 5.513.565713.50Cylindrical ShankSquare, Center Cut3045°0.130
1 Piece(s) 12 Day(s) or more 613.565713.50Cylindrical ShankSquare, Center Cut-45°0.130
1 Piece(s) 8 Day(s) or more 6.516.586316.50Cylindrical ShankSquare, Center Cut3045°0.130
1 Piece(s) 8 Day(s) or more 716.586316.50Cylindrical ShankSquare, Center Cut3045°0.130
1 Piece(s) 8 Day(s) or more 819.586319.50Cylindrical ShankSquare, Center Cut-45°0.130
1 Piece(s) 8 Day(s) or more 919.5107219.50Cylindrical ShankSquare, Center Cut3045°0.130
1 Piece(s) 8 Day(s) or more 1022.5107222.50Cylindrical ShankSquare, Center Cut-45°0.200
1 Piece(s) 8 Day(s) or more 1226.5128326.50Cylindrical ShankSquare, Center Cut-45°0.200
1 Piece(s) 8 Day(s) or more 1426.5148326.50Cylindrical ShankSquare, Center Cut-45°0.200
1 Piece(s) 8 Day(s) or more 1632.5169232.50Cylindrical ShankSquare, Center Cut-45°0.200
1 Piece(s) 8 Day(s) or more 1832.5189232.50Cylindrical ShankSquare, Center Cut-45°0.200
1 Piece(s) 8 Day(s) or more 2038.52010438.50Cylindrical ShankSquare, Center Cut-45°0.300
1 Piece(s) 8 Day(s) or more 2545.52512145.50Cylindrical ShankSquare, Center Cut-45°0.300

Loading...

  1. 1

Basic Information

work material general steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Number of flutes(sheet) 4 Type Square
Machining Application Plane Torsion Angle (θ) Standard torsion (30-40°) Torsion Angle Details(°) 35
Blade diameter tolerance h10 Shank diameter tolerance h6 Material type GC1630
Cutting Angle(°) 90 Standard DIN 6527 L Tool Style 1P240-XA

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)