TiAlN Coat, Carbide long neck square end mill, 4 flutes

TiAlN Coat, Carbide long neck square end mill, 4 flutes

[Features]
· Micro end mill ideal for machining deep ribs in materials up to HRC 55.
· 4-flute blade with a small blade diameter of 0.2 mm up is achieved. Compared to 2-flute type, this model has higher rigidity, longer tool service life, and achieves more efficient machining.
· European-made high quality for peace of mind. Even higher precision. (Blade Diameter Tolerance: ±0.005, Shank Diameter Tolerance h5: 0-0.005)

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
VHMS-4-002-064-06-03-L020
VHMS-4-002-064-06-03-L040
VHMS-4-004-064-06-03-L020
VHMS-4-004-064-06-03-L040
VHMS-4-004-064-06-03-L060
VHMS-4-004-064-06-03-L080
VHMS-4-004-064-06-03-L100
VHMS-4-005-064-06-03-L020
VHMS-4-005-064-06-03-L040
VHMS-4-005-064-06-03-L060
VHMS-4-005-064-06-03-L080
VHMS-4-005-064-06-03-L100
VHMS-4-010-064-06-03-L015
VHMS-4-010-064-06-03-L040
VHMS-4-010-064-06-03-L060
VHMS-4-010-064-06-03-L080
VHMS-4-010-064-06-03-L100
VHMS-4-015-064-06-03-L023
VHMS-4-015-064-06-03-L040
VHMS-4-015-064-06-03-L060
VHMS-4-015-064-06-03-L080
VHMS-4-015-064-06-03-L100
VHMS-4-020-064-06-03-L030
VHMS-4-020-064-06-03-L045
VHMS-4-020-064-06-03-L060
VHMS-4-020-064-06-03-L080
VHMS-4-020-064-06-03-L100
Part NumberVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Maximum Machining Depth
(mm)
Neck angle
(°)
Neck diameter
(mm)
Actual Effective Length for Workpiece Gradient Angle of 0.5° Actual effective length at work slope angle 1° Actual Effective Length for Workpiece Gradient Angle of 2° Actual Effective Length for Workpiece Gradient Angle of 3° Cutting edge accuracy Shank Accuracy
11 Day(s) or more 0.20.32.00110.182.1432.2452.4822.774g7h5
11 Day(s) or more 0.20.34.00130.184.2004.3714.7565.218g7h5
11 Day(s) or more 0.40.62.00110.382.1482.2552.5032.812g7h5
11 Day(s) or more 0.40.64.00130.384.2084.3854.7885.274g7h5
11 Day(s) or more 0.40.66.00150.386.2416.4596.9437.508g7h5
11 Day(s) or more 0.40.68.00150.388.3088.5979.2429.992g7h5
11 Day(s) or more 0.40.610.00150.3810.37510.73711.54112.478g7h5
11 Day(s) or more 0.50.82.00110.472.1782.2882.5452.866g7h5
11 Day(s) or more 0.50.84.00120.474.2354.4164.8305.331g7h5
11 Day(s) or more 0.50.86.00150.476.2656.4876.9837.562g7h5
11 Day(s) or more 0.50.88.00150.478.3278.6179.26310.015g7h5
11 Day(s) or more 0.50.810.00150.4710.39510.75711.56312.501g7h5
11 Day(s) or more 11.52.00100.953.0553.2233.6214.133g7h5
11 Day(s) or more 11.54.00110.954.3104.5144.9865.568g7h5
11 Day(s) or more 11.56.00140.956.3346.5827.1417.805g7h5
11 Day(s) or more 11.58.00150.958.3668.6579.30610.061g7h5
11 Day(s) or more 11.510.00150.9510.43310.79711.60612.547g7h5
11 Day(s) or more 1.52.33.009-4.4384.7135.3806.267g7h5
11 Day(s) or more 1.52.34.00101.454.3464.5765.1205.811g7h5
11 Day(s) or more 1.52.36.00121.456.3726.6517.2908.067g7h5
11 Day(s) or more 1.52.38.00151.458.3668.6589.30810.064g7h5
11 Day(s) or more 1.52.310.00151.4510.43310.79711.60612.547g7h5
11 Day(s) or more 233.008-5.1715.5376.4537.733g7h5
11 Day(s) or more 234.591.905.5135.8546.6837.785g7h5
11 Day(s) or more 236.00111.906.5496.8707.6198.552g7h5
11 Day(s) or more 238.00141.908.5158.8489.59710.486g7h5
11 Day(s) or more 2310.00151.9010.53010.89611.71312.663g7h5

Loading...

  1. 1

Basic Information

work material General steel / Quenched and tempered steel / High hardness steel –HRC55 / High hardness steel –HRC60 / High hardness steel –HRC65 / Stainless Steel / Titanium Number of flutes(sheet) 4 Type Long-Neck Square
Coating TiAlN Shank diameter (d)(mm) 6 Overall Length (L)(mm) 64

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)