(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Bound Plug Gauge H7 (for machining) (TLP17-H7)

Carbide Bound Plug Gauge H7 (for machining) TLP17-H7

Click this image to zoom it.

Move the mouse over the image to zoom

  • Carbide Bound Plug Gauge H7 (for machining)
  • Carbide Bound Plug Gauge H7 (for machining)

Highly economical carbide alloy plug gauge that has excellent durability and resistance to thermal expansion.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Excellent abrasion resistance, lasting approximately 20 to 30 times longer than steel.
· Low thermal expansion coefficient (1/2 that of steel, 5x10-6/K) reduces the influence of temperature.
· High hardness eliminates worries about scratching the surface.
· Gauge management is easy. The periodic gauge inspection interval is lengthened, making it economical.
· Includes an inspection results chart.
[Applications]
· Used for hole diameter inspections.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

TLP17-H7

What is limit plug gauge

The gauge has two ends with standard maximum and minimum tolerable size of the hole.


Instructions for use

  • GOGO side ( can pass through the whole holes smoothly)
    The GO side is used to check if the diameter of the hole which is bigger than the
    maximum entity size【minimum tolerable size of the hole】, the gauge can go
    through the hole completely.
  • NO-GO side (can not pass through the hole)
    The NO-GO side is used to check if the diameter of the hole is smaller than the minimum
    entity size【maximum tolerable size of the hole】, the gauge can notgo into the hole.
 
What is entity size
The volume of hole is the minimum when the 
hole is finished with minimum tolerable size. 
Therefore, the other volume except the hole 
(this is entity size, the right drawing with slanted 
portion) is the maximum, that is the maximum 
entity size. The opposite meaning of above 
mention is the minimum entity size.

  • Grade / same with the tolerance of the hole, plug gauge also has H6~H10.
    The smaller the number the more precise it is.
  • Hardness / HV600~780
*Make sure there is no error on the grade.
Vickers hardness (HV):Press the square pyramid shape diamond indenter against the
surface of the material to do indentation hardness test.

Precautions before use

  • Make sure the tip of plug gauge
    without any burrs.
  • Burrs may hurt the hole.

Precaution after use

  • Remove all dust and fingerprints
    then apply anti-rust oil.
  • Keep it at a place with small changes
    in humidity and temperature.
 

Example for use

Part Number
TLP17-H7
Part NumberMinimum order quantityVolume DiscountDays to ShipNominal Mass
(g)
1 Piece(s) 10 Day(s) or more φ17128

Loading...

  1. 1
 

Basic Information

Product Model Limit Plug Gauge Material Gauge Part: Cemented Carbide, Shank Part: Aluminum Features · A pair of gauges with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Features exceptional abrasion resistance and the service life is about 20 to 30 times that of steel, making the unit durable and economical. · There is little impact from temperature, as thermal expansion coefficients are small. · No need to worry about scratching of the surface due to a high degree of hardness. · Gauge management is easy.
Use Hole Diameter Inspection

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)