(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Ceramic, Step Limit Plug Gauge H7

Ceramic, Step Limit Plug Gauge H7

Click this image to zoom it.

Move the mouse over the image to zoom

  • Ceramic, Step Limit Plug Gauge H7
  • Ceramic, Step Limit Plug Gauge H7
  • Ceramic, Step Limit Plug Gauge H7

A plug gauge with Go and No-Go in one area, eliminating the need to change the direction of the gauge and improving efficiency.
[Features]
· A pair of gauges with external dimensions based on the maximum and minimum allowable dimensions as references.
· Can be used for obtaining fit compatibility between the hole and the shaft.
· Material with exceptional wear resistance in comparison with steel, which strongly resists changes over time.
· No concerns about rust or corrosion on the measurement surface, with extremely simple maintenance and management after use.
· Material with a thermal expansion coefficient almost identical to steel. Measurement surface is nonmagnetic material that will not become magnetized.
· There is little change in plasticity due to scratches or dents and there are no burrs or bulges.
[Applications]
· Used for hole diameter inspections.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

 
Part Number
SPCLP-10
SPCLP-11
SPCLP-12
SPCLP-13
SPCLP-14
SPCLP-15
SPCLP-16
SPCLP-17
SPCLP-18
SPCLP-19
SPCLP-20
SPCLP-21
SPCLP-22
SPCLP-23
SPCLP-24
SPCLP-25
SPCLP-26
SPCLP-27
SPCLP-28
SPCLP-29
SPCLP-30
Part NumberMinimum order quantityVolume DiscountDays to ShipNominal
1 Piece(s) 48 Day(s) or more φ10
1 Piece(s) 48 Day(s) or more φ11
1 Piece(s) 48 Day(s) or more φ12
1 Piece(s) 48 Day(s) or more φ13
1 Piece(s) 48 Day(s) or more φ14
1 Piece(s) 48 Day(s) or more φ15
1 Piece(s) 48 Day(s) or more φ16
1 Piece(s) 48 Day(s) or more φ17
1 Piece(s) 48 Day(s) or more φ18
1 Piece(s) 48 Day(s) or more φ19
1 Piece(s) 48 Day(s) or more φ20
1 Piece(s) 48 Day(s) or more φ21
1 Piece(s) 48 Day(s) or more φ22
1 Piece(s) 48 Day(s) or more φ23
1 Piece(s) 48 Day(s) or more φ24
1 Piece(s) 48 Day(s) or more φ25
1 Piece(s) 48 Day(s) or more φ26
1 Piece(s) 48 Day(s) or more φ 27
1 Piece(s) 48 Day(s) or more φ28
1 Piece(s) 48 Day(s) or more φ29
1 Piece(s) 48 Day(s) or more φ30

Loading...

  1. 1

Basic Information

Product Model Limit Plug Gauge Material Gauge Part: Ceramic, Shank Part: Aluminum Features · A gauge with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Since the unit has been prepared with measurements for both open and close on one side, there is no need to change the orientation of the gauge to reduce the effort and improve inspection efficiency.
Use Hole Diameter Inspection

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)