(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Gasket Groove Width Measurement Limit Gauge

Gasket Groove Width Measurement Limit Gauge

Click this image to zoom it.

Move the mouse over the image to zoom

A limit gauge for flanges used to install ring joint gaskets, usable with various ring numbers.
[Features]
· GO/NO GO standards are in accordance with JPI-7S-23.
· Flange groove width tolerance: ±0.20 mm.
· Flange groove depth tolerance: +0.41/0 mm.
· Flange groove bottom corner radius tolerance: 1.5 mm or less: +0.8 mm / More than 1.5 mm: ±0.8 mm.
· Angle tolerance: ±0.5°.
· Material is stainless steel (SUS420J2).
[Applications]
· A limit gauge used to determine ring joint gasket mounted flange groove width pass/fail.

(i)Caution

  • Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

GSW-4

 
Part Number
GSW-4
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s) 8 Day(s) or more

Loading...

  1. 1

Basic Information

Flange Groove Width(mm) 19.84 Flange Groove Depth(mm) 12.70 Radius of Corner of Flange Groove Bottom 1.5
Mass(g) 22 Use A limiting gauge used in attachment with a ring joint gasket for judging pass/fail of the flange groove width. Specifications · The standard for GO/NOT is in accordance with JPI-7S-23.
Compatible Ring Number 42、47、70、74、88、89、93、94、95 Flange Groove Width Tolerance(mm) ±0.20 Flange Groove Depth Tolerance(mm) 0 to +0.41
Tolerance of the Radius of Corner of Flange Groove Bottom(mm) +0.8 Allowable difference of angle(°) ±0.5

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)