(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Rolled auto-slide knurled holder (for iris eyes)

Rolled auto-slide knurled holder (for iris eyes)

[Features]
· With initial position setting mechanism for knurled retaining parts. Auto-centering based on vertical auto-slide mechanism (±2.5 mm from initial position) eliminates differences in rolling force generated with two knurled wheels to allow for knurled processing at an even groove depth.
· Holder for rolled type diamond knurled processing.
[Applications]
· Applicable model: shank diameter: 20 x 20 mm.

  • STOCK

Part Number

Configured Part Number is shown.

Features

● With the initial position setting mechanism of the knurling holding part.
● Automatic alignment by upper and lower auto slide mechanism (±2.5mm from initial position) eliminates the rolling force gener-ated in 2 knurl pieces, and enables knurling processing with uniform groove depths.
● A holder for rolling diamond knurling

Specification

●Machining Diameter(mm):10 to 250
●SPQ(piece):1
● Compatible Model: Lathe
Part Number
KH1
KH2
Part NumberMinimum order quantityVolume DiscountDays to ShipWidth×Height×Length
(mm)
Compatible Knurled Piece JAN Code Trusco Code Mass
(g)
1 Piece(s) 1 Day(s) 20×16×130KN12CRL~FRL4967521179287270-0905410
1 Piece(s) 1 Day(s) 20×20×147KN30CRL~FRL4967521179294270-0913580

Loading...

  1. 1

Basic Information

Product Type Holder Machining Diameter(mm) 10~250 Compatible Model Lathe
Features · With initial position setting mechanism for knurled support parts. Auto-align based on vertical auto-slide mechanism (±2.5 mm from initial position) eliminates differences in rolling force generated with two knurled wheels to allow for knurled processing at an even groove depth. · Holder for rolling type diamond knurling processing. Application Compatible model: shank diameter: 20×20 mm

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)