(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Half-Ball Hex Wrench (Semi-Long)

Half-Ball Hex Wrench (Semi-Long)

Standard Unit Price:
-
Days to Ship :
1 Day(s)

[Features]
· The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
· Half ball finish allows achievement of easy insertion and the same level of torque transferability.
· The screw can be turned from a maximum slope degree of 32°.
· It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
· In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
· The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
· Final tightening can be performed with a ballpoint wrench by using the pipe handle.
· Partial painting is done so that the size can be distinguished at a glance based on color.

(i)Caution

  • Some products are scheduled to be discontinued from October 2021. Depend on stock status, the end time will be changed. Please check the quotation and order screen for details.

Basic Specifications

  • Specifications
    • STOCK
  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
  • Ordering Unit
    1 pc.
Part Number
Ordering Unit

Refine by

  • 1 pc.
  • Clear
Overall length (L dimension)(mm)

Refine by

  • 81.5
  • 88
  • 95.5
  • 104
  • 116
  • 127
  • 141
  • 162
  • 183
  • Clear
Hex bar wrench underneck length (H dimension) L-shape only(mm)

Refine by

  • 14
  • 16
  • 18
  • 22
  • 24
  • 29
  • 32
  • 36
  • 41
  • Clear
Opposite side dimensions(mm)

Refine by

  • 1.5
  • 2.0
  • 2.5
  • 3.0
  • 4.0
  • 5.0
  • 6.0
  • 8.0
  • 10.0
  • Clear
JAN Code

Refine by

  • 4989999391466
  • 4989999391473
  • 4989999391480
  • 4989999391497
  • 4989999391503
  • 4989999391510
  • 4989999391527
  • 4989999391534
  • 4989999391541
  • Clear
Trusco Code

Refine by

  • 768-4193
  • 768-4185
  • 768-4177
  • 768-4169
  • 768-4151
  • 768-4142
  • 768-4134
  • 768-4126
  • 768-4118
  • Clear
Days to Ship

Sort By

  • By Fastest Delivery Date
  • By Slowest Delivery Date
  • Clear
Standard Unit Price

Sort By

  • Price: Low to High
  • By Highest Price
  • Clear
Quantity
1 pc.
81.5
14
1.5
4989999391473
768-4126
1 Day(s)
-

Part Number : THBR-15
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    81.5
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    14
  • Opposite side dimensions(mm)
    1.5
  • JAN Code
    4989999391473
  • Trusco Code
    768-4126
  • Mass(g)
    1.5
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
88
16
2.0
4989999391480
768-4134
1 Day(s)
-

Part Number : THBR-20
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    88
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    16
  • Opposite side dimensions(mm)
    2.0
  • JAN Code
    4989999391480
  • Trusco Code
    768-4134
  • Mass(g)
    2.5
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
95.5
18
2.5
4989999391497
768-4142
1 Day(s)
-

Part Number : THBR-25
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    95.5
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    18
  • Opposite side dimensions(mm)
    2.5
  • JAN Code
    4989999391497
  • Trusco Code
    768-4142
  • Mass(g)
    5
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
104
22
3.0
4989999391503
768-4151
1 Day(s)
-

Part Number : THBR-30
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    104
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    22
  • Opposite side dimensions(mm)
    3.0
  • JAN Code
    4989999391503
  • Trusco Code
    768-4151
  • Mass(g)
    7.5
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
116
24
4.0
4989999391510
768-4169
1 Day(s)
-

Part Number : THBR-40
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    116
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    24
  • Opposite side dimensions(mm)
    4.0
  • JAN Code
    4989999391510
  • Trusco Code
    768-4169
  • Mass(g)
    15.5
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
127
29
5.0
4989999391527
768-4177
1 Day(s)
-

Part Number : THBR-50
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    127
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    29
  • Opposite side dimensions(mm)
    5.0
  • JAN Code
    4989999391527
  • Trusco Code
    768-4177
  • Mass(g)
    26
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
141
32
6.0
4989999391534
768-4185
1 Day(s)
-

Part Number : THBR-60
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    141
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    32
  • Opposite side dimensions(mm)
    6.0
  • JAN Code
    4989999391534
  • Trusco Code
    768-4185
  • Mass(g)
    41.5
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
162
36
8.0
4989999391541
768-4193
1 Day(s)
-

Part Number : THBR-80
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    162
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    36
  • Opposite side dimensions(mm)
    8.0
  • JAN Code
    4989999391541
  • Trusco Code
    768-4193
  • Mass(g)
    84.0
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.
1 pc.
183
41
10.0
4989999391466
768-4118
1 Day(s)
-

Part Number : THBR-100
Days to Ship 1 Day(s)
Standard Unit Price -
Quantity 1 pc.

Specificationtitle

  • Type
    Hex L-shape wrench
  • Tip Type
    Ballpoint
  • Single Product/Set Classification
    Single Item
  • Overall length (L dimension)(mm)
    183
  • Hex bar wrench underneck length (H dimension) L-shape only(mm)
    41
  • Opposite side dimensions(mm)
    10.0
  • JAN Code
    4989999391466
  • Trusco Code
    768-4118
  • Mass(g)
    148
  • Material
    Special Alloy Chrome Vanadium Steel
  • Notes
    The leading edge on the longitudinal side has an ordinary ball pointed shape.

Loading...

Searching. Please wait.

Cancel

The product list can be filtered using the selections found beneath the specification item name.

  1. 1

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)