(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series

FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series

High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

PDF

Part Number
FX-MG-CS-6.3X90
FX-MG-CS-8.3X90
FX-MG-CS-10.4X90
FX-MG-CS-12.4X90
FX-MG-CS-16.5X90
FX-MG-CS-20.5X90
Part NumberMinimum order quantityVolume DiscountDays to ShipTool Diameter (D)
(mm)
Large Tip Diameter
(mm)
Tool No. Link Diameter (d)
(mm)
Tip Diameter
(mm)
Overall Length
(mm)
Length of Tapered Part
(mm)
Nominal
1 Piece(s) 12 Day(s) or more 16.391490636155(2.65)6.3×6×2×55
1 Piece(s) 12 Day(s) or more 2.58.3914908362.555(2.9)8.3×6×2.5×55
1 Piece(s) 12 Day(s) or more 2.610.4914910482.665(3.9)10.4×8×3×65
1 Piece(s) 12 Day(s) or more 2.512.49149124102.565(4.95)12.4×10×4×65
1 Piece(s) 12 Day(s) 3.116.59149165103.170(6.7)16.5×10×4×70
1 Piece(s) 8 Day(s) or more 3.820.59149205123.870(8.35)20.5×12×5×70

Loading...

  1. 1
 

Basic Information

Application Centering ( Positioning ) / Hole Chamfer / Chamfering / Horizontal / V Groove Point Angle(θ) 90 work material General Steel / Heat-Treated Steel / High-Hardness Steel / Cast Iron / Aluminum / Copper / Graphite / Resin
Single blade, two blades Single Blade Peripheral Blade Y/N None Tool Material Type Carbide
Coating Y/N Included Coating Type TiAlN

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)