(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Air Impact Wrench (Short Type)

Air Impact Wrench (Short Type)

· Ultra small (short) body (overall length 108 mm) with high power (maximum torque 700 N·m) achieved.
· Design engineered focusing on one-hand operability.
· Settings can also be changed enabling operation by either right or left hand.
· While the main body is small, high power has been achieved by the enlarged big hammer mechanism for increased strike strength.
· [Specification]
· Rotates both directions.


  • Be sure to read the instruction manual before use. Be sure to wear safety glasses and protective gear. Tightening torque changes based on bolt/nut as well as condition of the member to be tightened.


Part Number

Configured Part Number is shown.


Part Number
Part NumberVolume DiscountDays to ShipAccessories
9 Day(s) or more Plug R1/4 (PT1/4), oil, instruction manual, suspension equipment


  1. 1

Basic Information

Number Of Rotations(rpm) No load: 10000 rpm Operating Air Pressure(Mpa) 0.62 Air Consumption Amount(m³/min) (ntp) 845, (op) 127
Output angle(mm) 12.7 Output angle(inch) 1/2 Air Inlet Rc1/4 (PT1/4)
Air Hose I.D.(mm) 10 or more Applicable Screw M20 Mass(g) 1,300
Overall Length 172 Max. Tightening Torque (Clockwise)(N▪m) 610 Max. Tightening Torque (Counterclockwise)(N▪m) 700

Please check the type/dimensions/specifications of the part AI4200 in the Air Impact Wrench (Short Type) series.

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)