(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Air Impact Wrench (Angle Type)

Air Impact Wrench (Angle Type)

[Features]
· Thin head (height 50 mm, diameter ø55 mm) makes this optimal for attaching/detaching bolts in narrow areas as well as replacing claws on the cultivator.
· Lightweight 1.5 kg achieved with its aluminum alloy hammer case and special strength plastic body.
· Has a dial for adjusting output in forward (right) rotation in two steps.
· Depending on how far the switch is pulled, stepless output adjustment is also possible.
· Uses a shape that is easy to hold and a soft grip that mitigates vibration.
[Specification]
· Rotates both directions.

(i)Caution

  • Be sure to read the instruction manual before use. Be sure to wear safety glasses and protective gear. Use a compressor with an air tank. A compressor with an output of 0.75 kW (1 PS) or higher is recommended. If tightening torque is specified, use of a torque wrench is recommended. Tightening torque changes based on bolt/nut as well as condition of the member to be tightened.

Part Number

Configured Part Number is shown.

AIA4140

Part Number
AIA4140
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s) 35 Day(s)

Loading...

  1. 1

Basic Information

Number Of Rotations(rpm) No load: 4300 rpm Operating Air Pressure(Mpa) 0.62 Air Consumption Amount(m³/min) (ntp) 708, (op) 105
Output angle(mm) 12.7 Output angle(inch) 1/2 Air Inlet Rc1/4 (PT1/4)
Air Hose I.D.(mm) 10 or more Applicable Screw M14 (strength classification 10.9) Mass(g) 1,500
Overall Length 334 Max. Tightening Torque (Clockwise)(N▪m) 210 Max. Tightening Torque (Counterclockwise)(N▪m) 250
Accessories Plug R1/4 (PT1/4), oil, instruction manual

Please check the type/dimensions/specifications of the part AIA4140 in the Air Impact Wrench (Angle Type) series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)