• Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding

Throw-Away Drill, GEN3 32 Series

[Features]
· Achieves machining cost reductions through high speed, high feed, high efficiency, and scrap management
· Larger scrap pocket
· X thinning with excellent centripetality
· Low resistance blade tip shape

(i)Caution

  • Use a holder and tip from the same series. Direct grooving is recommended if the coolant pressure is 3.5 MPa or more. Periodically replace the holder after the tip has been exchanged about 100 times.

Part Number

Configured Part Number is shown.

60332H-40FM

Part Number
60332H-40FM
Part NumberVolume DiscountDays to ShipApplicable Clamp Screw Applicable Screwdriver Accessories Shape
11 Day(s) or more 7495-IP15-108IP-15 (Sold Separately)Clamp Screw x 4, Screw Seizing Prevention Agent (Easy-Break)Torsional Groove Type

Loading...

  1. 1

Basic Information

Hole diameter (drill diameter) D(mm) 32.00 to 35.00 Overall Length L(mm) 227.7 Shank Type straight shank
Maximum Machining Length(mm) 105.0 3D Body Length(mm) 161.3 Shank Diameter x Length(mm) ø40 x 70
Pipe Screw 1/4"

Please check the type/dimensions/specifications of the part 60332H-40FM in the Throw-Away Drill, GEN3 32 Series series.

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)