(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Anti-Vibration Stub Carbide End Mill_AE-VMSS

Anti-Vibration Stub Carbide End Mill_AE-VMSS

[Features]
· The DUARISE coating offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Also, the smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance. The new flute form achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and reduced burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.

(i)Caution

  • Use rigid, high-precision products for machinery and holders. Adjust the rotation speed and feed rate according to the usage conditions (workpiece retaining strength, machinery rigidity etc.) Use a low-smoking cutting oil that is also suitable for the work material. For dry-type milling, remove the chips using an air blower so that they do not clog the hole. When milling stainless steel, it is recommended to use water-soluble cutting oil. For precision machining, reduce the rotation speed, feed rate and cutting depth.

PDF

Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

The difference is clearly shown in the quality of slot milling!

There are hardly any burrs generated during slot milling, which is a proof of stable milling.

Poor chip evacuation and excessive cutting force are the main causes of unstable milling, which leads to the generation of burrs. 
The AE-VMS is able to achieve stable performance with minimal burrs even in slot milling at a depth of 10mm.

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Stable Performance
Low Cutting Force

• Sharp positive rake angle reduces cutting force.
• New flute form with high tool rigidity and excellent chip evacuation properties enables stable milling and the suppression of burrs.

10% lower cutting force versus the competitors

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

High Efficiency
Suppression of Vibration

Unequal spacing of teeth and variable-lead geometry enables stable and high efficiency milling

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Superior Surface Quality
DUARISE Coating

 
• Provides excellent lubricity, superior friction-resistance and 
high oxidation temperature.
Multi-layer construction minimizes the thermal cracks that often 
occurred while using water soluble oil.

• Smoothing surface coating treatment made an excellent quality 
of surface finishing.
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS

Cutting Data

Suppression of Heat Generation
Suppression of cutting heat generation minimizes tool wear

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Surface roughness after milling 11.2m

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Tool condition after milling 156.8m

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Stable Performance
Normal wear with no chipping even in slot milling

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Stable Performance
Stable performance even in slotting

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Wear comparison after milling 68.6m

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

High Efficiency
Trouble-free chip evacuation even in high-speed slotting

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Long Tool Life
DUARISE coating enables consistent tool wear

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Wear comparison after milling 196m

 
Carbide Vibration-Proof Stubby (Square Type) End Mill AE-VMSS
 

Deep Side Milling
Great surface finish with no chattering

 

Product Introduction

Part Number
AE-VMSS3
AE-VMSS3.5
AE-VMSS4
AE-VMSS4.5
AE-VMSS5
AE-VMSS5.5
AE-VMSS6
AE-VMSS6.5
AE-VMSS7
AE-VMSS7.5
AE-VMSS8
AE-VMSS8.5
AE-VMSS9
AE-VMSS9.5
AE-VMSS10
AE-VMSS10.5
AE-VMSS11
AE-VMSS11.5
AE-VMSS12
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Tool No.
1 Piece(s) 12 Day(s) or more 34.56458556430
1 Piece(s) 12 Day(s) or more 3.55.36458556435
1 Piece(s) 12 Day(s) or more 466458556440
1 Piece(s) 2 Day(s) 4.56.86458556445
1 Piece(s) 12 Day(s) or more 57.56458556450
1 Piece(s) 12 Day(s) or more 5.58.36458556455
1 Piece(s) 12 Day(s) or more 696458556460
1 Piece(s) 8 Day(s) or more 6.59.88608556465
1 Piece(s) 12 Day(s) or more 710.58608556470
1 Piece(s) 8 Day(s) or more 7.511.38608556475
1 Piece(s) 12 Day(s) or more 8128608556480
1 Piece(s) 12 Day(s) or more 8.512.810708556485
1 Piece(s) 8 Day(s) or more 913.510708556490
1 Piece(s) 8 Day(s) or more 9.514.310708556495
1 Piece(s) 12 Day(s) or more 101510708556500
1 Piece(s) 12 Day(s) or more 10.515.812758556505
1 Piece(s) 8 Day(s) or more 1116.512758556510
1 Piece(s) 12 Day(s) or more 11.517.312758556515
1 Piece(s) 12 Day(s) or more 121812758556520

Loading...

  1. 1
 

Basic Information

work material General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Number of flutes(sheet) 4 Type Square
Machining Application Side Surface / Groove / Inclined Cutting Torsion Angle (θ) Uneven Lead Helix Angle 2 37 to 40°
Coating ② DUARISE coating Flute Diameter Tolerance(mm) 0 to -0.02

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)