• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

PCD Kirari Single Flute End Mill PCDE1

PCD Kirari Single Flute End Mill PCDE1

Click this image to zoom it.

Move the mouse over the image to zoom

· Made using carefully selected ultra-high-pressure sintered diamond (PCD.)
· A carbide alloy is used for the shank, enabling stable cutting.
· The uniquely shaped structure ensures high-precision, a long tool-life and high-efficiency machining.
· A long tool-life 20 times or more that of a carbide coated end mill when used for cutting light alloys, brass, FC, etc.


  • Use for dry cutting. Select equipment with as high a rigidity as possible in order to carry out stable cutting.

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipBlade diameter (D)
Blade length (ℓ)
14 Day(s) or more 0.50.8PCD
14 Day(s) or more 0.60.9PCD
14 Day(s) or more 0.71PCD
14 Day(s) or more 0.81.2PCD
14 Day(s) or more 0.91.5PCD
14 Day(s) or more 12PCD
14 Day(s) or more 1.52.5PCD
14 Day(s) or more 23PCD
14 Day(s) or more 2.53.5PCD


  1. 1

Basic Information

Number of flutes(sheet) 1 Type Square Coating Non-Coated
Shank diameter (d)(mm) 4 Overall Length (L)(mm) 50 Torsion Angle (θ) No torsion
Blade diameter tolerance ±0.005

Additional Products in this Category

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)