PLC (Wire-Saving Dedicated Units)（Connection Terminal：Terminal block/connector）

• 

  GX digital I/O terminal

  OMRON

  A remote I/O terminal that realizes high-speed communication for various purposes.
  [Features]
  ·Digital I/O terminal: Executes input/output of digital ON/OFF signals.
  ·Equipped with a detachable screw terminal block for improved maintainability.
  ·Expansion units can be installed (one expansion unit can be installed per unit).
  ·The input response time can be switched to achieve high-speed processing.
  [Applications]
  ·Remote I/O terminal for EtherCAT.

  Days to Ship:	16 Day(s) or more

• 

  GX analog I/O terminal

  OMRON

  EtherCAT compatible analog I/O terminal with screw type terminal block.
  [Features]
  ·The input range (or output range) can be easily changed by simply setting the switch.
  ·Equipped with a detachable screw-type terminal block for improved maintainability.
  ·Equipped with a moving average calculation function. Configurable from 100µs to 64 ms (input only).
  ·Wire break detection function (input only, when used with 1-5 V, 4-20 mA).
  ·Rotary switch setting and tool setting can be selected for the node address.
  ·In the case of rotary switch settings, settings are easy, and node identification during maintenance is easy.

  Days to Ship:	16 Day(s) or more

• 

  Safety Network Controller NE1A-SCPU Series

  OMRON

  Safety Network Controller NE1A-SCPU Series

  Days to Ship:	16 Day(s) or more

• 

  Analog I/O slave CRT1

  OMRON

  Convert smart. Compute smartly. A simple and smart analog slave.
  [Features]
  ·In addition to inputting and outputting analog data, analog I/O slaves can process various operations inside the unit, such as scaling functions, which conventionally had to be processed on the ladder program of the host PLC.
  ·Analog processing similar to that of a digital panel meter is possible by using calculation functions such as the scaling function.
  ·By using the differentiation/integration function, it is possible to perform analog integration processing such as equipment abnormality prediction and diversion.
  ·By using the user calibration function, it is possible to correct the "deviation" of the input value (or output value).
  ·The input (or output) range can be easily changed by simply setting the switch.

  Days to Ship:	16 Day(s) or more

• 

  Digital I/O Slave CRT1

  OMRON

  OMRON Digital I/O Slave CRT1. Control network type: CompoNet, additional functions: Input/output, communication function

  Days to Ship:	Same day or more

• 

  DRT2 Connector Terminal

  OMRON

  Ultra-compact 16-point and 32-point remote terminals.
  [Features]
  ·Realizes connection with various I/O interfaces in combination with an interface conversion board.
  ·Width 35 × depth 60 × height 80 mm.
  [Applications]
  ·Terminal unit used for DeviceNet.

  Days to Ship:	Same day or more

• 

  Digital I/O Unit GT1-ID / OD

  OMRON

  Digital I/O unit compatible with multiple I/O terminals.
  [Features]
  ·Lineup of terminal block type, connector type, and multi-point connector type.
  ·With the terminal block type, the circuit part can be detached. Maintenance can be performed without disconnecting the wiring.
  ·DIN rail mounting.
  ·Total external load current for GT1-OD16/GT1-OD32ML (-1): 4 A.
  ·GT1-OD16ML total external load current: 2.5 A.

  Days to Ship:	16 Day(s) or more

• 

  Relay Output Unit GT1-ROS16 / ROP08 / FOP08

  OMRON

  Relay Output Unit GT1-ROS16 / ROP08 / FOP08

  Days to Ship:	16 Day(s) or more

• 

  GX encoder input terminal

  OMRON

  EtherCAT-compatible encoder input terminal that achieves high-speed and accurate control.
  [Features]
  ·Equipped with two counters. Counts pulses in a 32-bit range.
  ·The maximum input pulse frequency is 4 MHz (line driver input, multiplied by 4).
  ·High-speed and accurate control is possible with the ultra-high-speed network EtherCAT connection.
  ·You can choose from open collector input (GX-EC0211) or line driver input (GX-EC0241).
  ·Equipped with 2 external latch inputs and 1 reset input.
  ·Rotary switch setting and tool setting can be selected for the node address.
  ·In the case of rotary switch settings, settings are easy, and node identification during maintenance is easy.
  ·Equipped with a detachable screw terminal block for improved maintainability.

  Days to Ship:	16 Day(s) or more

• 

  Digital I/O Terminal GX

  OMRON

  EtherCAT compatible screw type terminal block type high-speed digital I/O terminal.
  [Features]
  ・ Equipped with a removable screw terminal block for improved maintainability
  ·Expansion unit can be installed. (One extension unit is installed per unit)
  ・ Flexible input/output points can be expanded according to the equipment
  ・ Input response time can be switched to achieve high-speed processing
  ・ Node address can be selected from rotary switch setting and tool setting
  ・ In the case of rotary switch setting, it can be set easily and node identification during maintenance is easy

  Days to Ship:	16 Day(s) or more

• 

  EtherNet/IP-DeviceNet Router NE1A-EDR01

  OMRON

  EtherNet/IP-DeviceNet Router NE1A-EDR01

  Days to Ship:	16 Day(s) or more

Loading...