SSR

• • On Sale Till 30/06/2024

  

  Solid State/Relay G3NA

  OMRON

  [Features]
  · General purpose solid state relay with a wide lineup of applied loads, 5 to 90A.
  · Small version of internal equipment type, unified mounting angle.
  · Varistor built-in (except for model G3NA-D210B), superior for external surge absorption.
  · Operation viewable due to operation display lamp.
  · Includes protective cover for safety.
  · Overseas standard UL, CSA standard acquired for standard type.
  · EN standard (TUV certified) and turned into series (-UTU type).
  · (Not including model G3NA-410B, model G3NA-420B, model G3NA-440B (-2)).

  • Volume Discount

  	Special Price
  Days to Ship:	Same day or more

• • On Sale Till 30/06/2024

  

  Solid State Relays for Heaters, G3PE

  OMRON

  Small, slim type SSR with integrated heatsink. Non-zero cross type also available, compatible for a wide-range of uses.
  [Features]
  ・ Improved surge voltage immunity of output circuit by surge path function (Depends on manufacturer test conditions)
  ・ Not only DIN rail mounting but also screw mounting is possible
  ・ Obtained UL, CSA, EN standard (TǕV certification)
  [Applications]
  ・ For ON/OFF control of single-phase heaters and other single-phase equipment

  • Volume Discount

  	Special Price
  Days to Ship:	Same day or more

• 

  Solid State / Relay, G3F / G3FD

  OMRON

  [Features]
  · Same size as model MY, G3F series with overseas standard acquired (-VD type) added to the series.
  · UL, CSA, EN (VED certification) standards acquired (-VD type).
  · Socket type the same size as model MY (2-pole type).
  · Input viewable due to operation display lamp (N type).

  Days to Ship:	Same day

• 

  Power Solid State Relay G3PA

  OMRON

  [Features]
  · Ultra small slim type with integrated radiator.
  · Withstand voltage AC4,000V.
  · Miniaturization due to optimal radiator design.
  · In addition to screw mounting, DIN rail mounting is also possible.
  · Close contacted mounting can be easily done at the connection terminal, and is even applicable in three-phase incapable models (there is no connection terminal in models G3PA-260B-VD, and G3PA-450B-VD-2).
  · Even if the power element breaks, the cartridge format allows for it to be replaced.
  · UL, CSA standards, EN standards (VDE certification) acquired.
  · -VD (rating 200V) type received the rating for its strengthened insulation (VDE).

  • Volume Discount

  Days to Ship:	Same day or more

• 

  I/O Solid State Relay, G3TA

  OMRON

  I/O solid state relay that can be equipped with model G7TC I/O relay terminal
  
  [Features]
  · Input module, output module available as I/O multitype.
  · Can be used with model P7TF I/O terminal.
  · Can be mixed loaded with model G7T I/O relay.
  · SSR operations can be viewed with the operation display lamp.
  · UL, CSA standards acquired and turned into a series (-US type).

  Days to Ship:	Same day or more

• 

  I/O Solid State Relay G3R-I/O

  OMRON

  [Features]
  · Same size as plug-in terminal SSR model G2R-1-S power relay.
  · I/O solid state relay that can be equipped on model G70A I/O terminal.
  · UL, CSA, TÜV certified products also available (-UTU type).

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Solid State / Relay G3H / G3HD

  OMRON

  [Features]
  · Same shape as model LY1, LY2 high power relay G3H series, added to the series of overseas planned income products (-VD type).
  · UL, CSA, EN (VDE certification) standards acquired (-VD type).
  · Socket type of identical size to model LY (1-pole, 2-pole types).
  · Input viewable due to operation display lamp (N type).

  • Volume Discount

  Days to Ship:	Same day

• 

  CT Built-in Solid State Relay G3PF

  OMRON

  [Features]
  · Built-in CT, new concept SSR allows for heater disconnection detection and SSR short-circuit malfunction detection.
  · Built-in CT, promotes reduction in wiring man-hours.
  · Can detect single disconnection in multiple heaters.
  · Can detect disconnection in 3-phase heaters.
  · Can detect SSR short-circuit malfunctions.
  · Abnormality detection level can be easily set by switch.
  · Both DIN rail mounting and screw mounting are possible.
  · 3 types of input terminals are available: M3 terminal, screwless clamp terminal (removable), and small minus terminal (removable).
  · CSA standards, EN standards (TÜV certification) acquired.
  · UL standard acquired (model G3PF-2□□B-□□□ series).

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Soft Start Type G3J-S

  OMRON

  Achieves smooth motor start at low cost with the soft start function.
  [Features]
  · Smooth motor startup due to soft startup function. Achieves energy saving by suppressing the starting current
  ・ UL/CSA, IEC standard acquisition
  ・ Common for DIN rail mounting and screw mounting
  ・ Small structure with integrated heatsink (W80 × H100 × D100mm)
  ・ Built-in snubber circuit and varistor
  ・ Built-in operation indicator light

  Days to Ship:	16 Day(s) or more

• • On Sale Till 30/06/2024

  

  Terminal SSR G3S4

  OMRON

  [Features]
  · Small 4-point output terminal SSR.
  · Small SSR (model G3S, 4 pcs. equipped) and socket, easy-to-use SSR with integrated radiator.
  · Terminal has IN/OUT isolated construction, so wiring is simple.
  · Includes operation display LED.
  · Dedicated socket allows for easy relay replacement.
  · Shared DIN rail mounting, screw mounting.

  	Special Price
  Days to Ship:	Same day or more

• 

  Power MOS FET Relay G3RZ

  OMRON

  [Features]
  · Same shape as model 7G2R, 1A load switching possible in this MOSFET relay with AC/DC.
  · AC240V or DC100V, 1A load switching possible.
  · Open state leakage current between outputs is 10 µA or less.
  · Open state electrical resistance AC2, 500V.
  · Built-in input resistance and overcurrent absorbing circuits.
  · Can switch between AC full-wave rectification and half-wave rectification.

  Days to Ship:	Same day

• 

  Solid State/Connector For Three-Phase Motor G3J-T-C

  OMRON

  Solid state contactor for 3-phase motor G3J-T-C
  
  [Features]
  · AC power input type added to model G3J-T.
  · Simultaneous monitor output (non-contact 1a equivalent output).
  · Energy saving with low start up current.
  · UL/CSA standard acquired.
  · Use with both DIN rail mounting and screw mounting.
  · Heatsink integrated construction (3.7 kW W100 × H100 × D130 mm).
  · Built-in snubber circuit and varistor.
  · Built-in operation display lamp.

  Days to Ship:	16 Day(s) or more

• 

  AC Input Unit G32A-B

  OMRON

  [Features]
  · AC input unit that makes AC control possible.
  · Up to 2 G3PA (-VD type) units can be connected.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  I/O Solid State Relay G3TB

  OMRON

  [Features]
  · I/O solid state relay for logic circuit and load interface.
  · Lineup features input module (AC/DC), output module (AC/DC), with each module distinguishable by color.
  · RSS operations can be viewed with the operation display lamp.
  · Withstand voltage between input and output 4,000V.

  Days to Ship:	Same day

• 

  Solid State / Relay G3B / G3BD

  OMRON

  [Features]
  · Plug-in type with the same shape as the MK power relay.
  · Overseas standard compliant (-VD type) added to series.
  · UL, CSA, EN (VDE certification) standards acquired (-VD type).
  · Plug-in type of identical size to model MK (2 varieties).
  · Input viewable due to operation display lamp.

  • Volume Discount

  Days to Ship:	Same day

• 

  High-Power Solid State Relay G3PH

  OMRON

  SSR for high power load control with high current 75/150 A and high voltage 240 /480 V AC.
  [Features]
  ・ Assortment of types without zero cross
  ・ Power element can be replaced
  ・ Obtained cULus standard and EN standard (TÜV certification)
  [Applications]
  ・ Mainly used for heater control of single-phase heaters and other single-phase equipment

  Days to Ship:	16 Day(s) or more

• 

  Hybrid Power Relay G9H

  OMRON

  [Features]
  · Hybrid of magnet relay and SSR is 10A, and allows for 10 million cycles.
  · Switches with tri-arc when closed, shut off.
  · For that reason, there is little chattering or arc, and electrical resistance is 10 million cycles.
  · Relay connection is used when current passes through, so even with its compact size, it offers 10A switching and high capacity, and there is almost no effect on heat generation and ambient temperature.
  · LED operation display lamp allows easy operation viewing.
  · Built-in thermal fuse prevents internal burnout due to tri-arc and relay malfunction.
  · Socket type of identical size to model LY (1-pole, 2-pole types).

  Days to Ship:	Same day

• 

  Power MOS FET Relay G3FM

  OMRON

  SSR for micro-load switching with leakage current under 100 μA and no need for bleeder resistance
  
  [Features]
  · Same size as model MY (2-pole type)
  · Solid state relay for micro-load switching between 1-500mA.
  · AC/DC shared switching, and DC switching is non-polarized.
  · Wide range switching possible AC19.2 to 264V, DC19.2 to 125V
  · Switching possible for AC full-wave rectification and half-wave rectification.
  · Comes with operation display lamp. Input status to SSR can be viewed at a glance.
  · Direct switching with model MY (no need for breeder resistance).
  · Superior external surge absorption due to built-in varistor.

  Days to Ship:	Same day or more

• 

  Single Function Type G3J

  OMRON

  [Features]
  · Solid state contact for 3-phase motors that can be used with protection coordinated contact sensing and thermal relays.
  · UL/CSA standard acquired.
  · Use with both DIN rail mounting and screw mounting.
  · Heat sink integrated compact construction (W80 × H100 × D100 mm).
  · Built-in snubber circuit and varistor.
  · Built-in operation display lamp.
  · 2 element type also part of a series.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Solid State Relay For Heaters G3PJ

  OMRON

  A Value Design for Panel product that increases the value of your control panels.
  Single-phase SSR for low heat generation enables carrying 25 A (G3PJ-□25B(-PU)) even for close mounting of 3 SSRs to contribute to downsizing of control panels.
  Models available with push-in input terminals.
  
  ■ Features
  · Easier designing and wiring while maintaining the previous 22.5‑mm width to help save space
  Size reductions in solid state relays mean you can downsize control panels and cooling equipment,
  and support for close mounting helps you save even more space.
  · Better temperature characteristics and reinforced insulation for international standard compliance
  UL-listed components, so you can reduce the time required for the UL application process.
  　Using new components or upgraded components is easy.
  　You can procure the components even when an urgent need arises for adjustments or problem-solving.
  · Push-In Plus terminal blocks for easy wiring
  Just insert wires: no tools required.
  　Now you can use Push-In Plus terminals to reduce the time and work involved in wiring.
  

  **ขอราคาวันนี้ รับเลยของรางวัล ไม่ต้องลุ้น ถึง 31 ต.ค.นี้ ดูรายละเอียด ที่นี่

  Days to Ship:	Same day

Loading...