Counters

• 

  Digital Display Unit M7E

  OMRON

  Digital display unit M7E
  
  [Features]
  · Blanking in the new model.
  · A series with additional functions added.
  · 14 mm alphanumerics height, switchable between two display colors of red and green.
  · A product line-up of various types, select in accordance with installation site location.
  · Space saving achieved in the apparatus thanks to a 43 mm depth small size design.
  · DC12 to 24V free power source.
  · Display of "-" enabled by a signal code of the 10 ordinal type.
  · A product line-up with a zero suppression function.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Small Total Counter/Time Counter/Tachometer (DIN 48x24) H7E□-N

  OMRON

  [Features]
  · A small scale economic counter with improved ease of viewing and ease of use.
  · Large scale display enabling 8.6 mm high alphanumeric height.
  · Metered numbers enabled up to 8 digits.
  · A back-lit type series emphasizing visibility.
  · Erroneous operation of the reset key prevented by a key protect switch.
  · A series wherein the case color uses black instead of gray.
  · Corresponds to the NEMA4 front part.
  · The main part may be reused by current exchange.
  · A finger protection structure which meets VDE0106Part100 is fitted.
  · Safety standards UL, CSA acquired, corresponds to the CE mark.
  · Conforms to EN61010-1 Pollution Degree 2/Overvoltage Category 3.
  · EMC standard (EN61326).
  · May be employed in conformance with an industrial environment but also in sales and light industrial, as required.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Electron Counter/Tachometer H7CX-A□-N

  OMRON

  [Features]
  · Even easier to view and easier to use.
  · The No. 1 counter/tachometer has advanced further.
  <Basic functions>.
  · An ultra-short barrel body with a depth of 59 mm (terminal block type DC12 to 24V).
  · High visibility enabled by an alphanumeric height of 12 mm (4 digit type)/10 mm (6 digit type).
  · Three colors of alphanumerics (first display) (Red/Green/Orange).
  · Switchable .
  · Newly incorporates a "setting value limit function" and "output iteration counter function"
  .
  · The front part can be white or light gray.
  · A series of tachometer has been added of the two-input, two-output type.

  • Volume Discount

  Days to Ship:	9 Day(s) or more

• 

  GC2 Series Electronic Counter (Total Counter)

  LINESEKI

  A panel surface protective structure IP54. This product has the CE mark and UL certification.
  
  [Features]
  · Incorporates a lithium battery (replaceable) with a seven year lifetime.
  · Panel surface protection structure IP54.
  · CE mark acquired (EMC).
  · UL certified.

  Days to Ship:	11 Day(s) or more

• 

  Multi counter/timer (DIN72×72) H8BM-R

  OMRON

  Incorporates 9 counters (timers). The iterations of machine use and duration are counted, to predict the maintenance period
  
  [Features]
  · The nine counters may even be used as accumulation timers (may be used with a mixture of counter and timer functions).
  · The output of the notification of the maintenance period is individually output.
  · Incorporates an advance report display equipment stoppage output function.
  · The setting part has oil resistance IP54, i.e. resistant to water and oil.
  · Easy-to-change value setting all digit key format.
  · A compact type DIN72 × 72 mm, with a short barrel type which is 79 mm deep.
  · Incorporates a key protect function preventing erroneous operation.
  · The output is NPN/PNP multiple.
  · Can be connected directly to a two wire DC sensor.
  · UL, CSA standard acquired.
  · May also be used as a multistage preset counter.

  Days to Ship:	11 Day(s) or more

• 

  Electron Counter (DIN 72x72) - H7BX

  OMRON

  [Features]
  · Bright, easy to view negative LCD display.
  · A new standard DIN72 × 72 mm sized electronic counter.
  · High visibility enabled by a negative LCD and back-lighting.
  · Checking from a distance enabled by a display color change function (Red<=>Green).
  · Simpler operation enabled by using vertical keys.
  · All of the basic settings are possible by the dip switch.
  · Total preset counter, batch counter, dual counter, tachometer loaded. Can deal with a wide range of inputs with multi
  · NPN/PNP input, and compatible with DC two lead sensor.
  · UL, CSA acquired.
  · Compatible with the CE mark.
  · Water resistant structure (only the front part of IP54).

  Days to Ship:	11 Day(s) or more

• 

  MCR series electromagnetic counter (total counter)

  LINESEKI

  [Features]
  · An electromagnetic counter with large easy-to-view display numbers.
  · It is robust against vibration, shock resistance, it is the optimum product for checking the operation and frequency of machine tools, printing machines, general industrial machinery etc.
  · We provide a great selection of apparatus with a variety of numbers of digits, voltages and methods of attachment to correspond with a variety of needs.

  Days to Ship:	9 Day(s) or more

• 

  tico731 series multi-functional counter

  DANAHER

  Compact 24 × 48 mm DIN size. Screw terminals for easy installation
  
  [Features]
  · Five models cover all applications.
  · Each type of apparatus enables setting of a max of seven functions.
  (Pulse counter, tachometer, time counter (displayed as h:min:sec), time counter (displayed as h,1/100h), numerical value display for sequencer (serial), position indicator, individual input counter (addition / subtraction))
  · high-contrast 8-digit LCD display, or clear 6-digit LED display.
  · Two types of power source, an incorporated lithium battery and maintenance free DC12 to 24V power source.
  · The input voltage is positive logic input of voltage input (maximum signal level DC40V) or connection point input (30Hz), and AC/ DC12 to 250V.
  · A compact DIN sized 24 × 48 mm.
  · Display range of 0 to 999999 (LCD type display). 0 to 999999 (LED type display).
  · Maximal 7.5kHz high count speed.
  · Easy attachment using screw terminals.
  · Provides transistor output for use in internal preset (models 4 and 5 only).
  · Can process orders of small numerical settings, prescale values, preset values, information text display (e.g.: display of maintenance, flow control, etc.).

  Days to Ship:	51 Day(s) or more

• 

  Digital Tachometer (DIN48×48)　H7CX-R□-N

  OMRON

  [Features]
  · type H7CX tachometer dedicated apparatus (DIN48 × 48 mm) (RPM/speed/flow volume etc. displayed, enabled output of warnings.
  · Socket type allows either embedded installation or surface installation.
  · W type can be added enabling measurement control with two systems.
  · Four modes of operation of up-down reduction/range/upper limit/lower limit are possible.
  · Built-in auto zero time, mean number of revolutions, start-up compensation timer, etc.

  Days to Ship:	11 Day(s) or more

• 

  Electron Counter (DIN72 × 72) - H7AN

  OMRON

  [Features]
  · DIN72 × 72 best-selling counter.
  · Employs a rotary thumb switch with simple operation.
  · A draw-out easy to maintain structure.
  · A 2, 4, 6, 8 digit product range.
  · A total counter series.
  · The standard product has acquired UL and CSA standard.

  Days to Ship:	9 Day(s) or more

• 

  E602 series counter

  DANAHER

  [Features]
  · 60H × 60WmmDIN sizes of types of digital switches.
  · A range of one stage preset at 2, 4 or 6 decimals so as to enable selection by application.
  · They can be select with or without memory.

  Days to Ship:	52 Day(s) or more

• 

  E722 series counter

  DANAHER

  [Features]
  · 72H × 72WmmDIN sizes of types of digital switches.
  · Zero output is also possible in a max. of six digit 2 stage preset.

  Days to Ship:	52 Day(s) or more

• 

  F464 series integrated electronic counter

  DANAHER

  A six digit accumulation counter. Use in computation/measurement/scales requiring a digital display.
  
  [Features]
  · 400N series of 4 to 8 digit accumulation counters and a wide variety of coil voltages so that a selection can be made in accordance with needs.
  · Uses GRP as a base material for a light weight and high strength, with a heat and vibration resistant finish.
  · Moreover, because all apparatus are plug-in types of the same size, there is a high degree of freedom in combining or substituting, as well as ease of maintenance.

  Days to Ship:	51 Day(s) or more

• 

  F468 series integrated electronic counter

  DANAHER

  [Features]
  · 400N series of 4 to 8 digit accumulation counters and a wide variety of coil voltages so that a selection can be made in accordance with needs.
  · Uses GRP as a base material for a light weight and high strength, with a heat and vibration resistant finish.
  · Because of the plug-in format and uniform dimensions of all apparatus types, not only can the preferred combinations and machine types be changed freely, maintenance is also facilitated.
  · Because the 8 digit accumulation counter enables the count display up to just before 100 million, it can be used for long term count accumulation and display.
  · There is no reset function for just the count display (electromagnetic reset is also not possible).

  Days to Ship:	51 Day(s) or more

• 

  FA486 series addition preset counter

  DANAHER

  5-digit accumulating preset counter. Because the counting part and the setting part are not separated, it has a structure where the set value can be maintained or changed even during calculation.
  
  [Features]
  · A variety of controls can be performed together with the counting.
  · Incorporates switch-over point (C connection) in tandem with the accumulation mechanism inside the main body, so that control output is enabled at any set value, thus is optimal for use in situations where there is a need for count and control simultaneously.
  · Not only can the set value be checked in the display in the lower window, it can also be changed during the count.
  · Returns to the original state after reset of the output connection point.
  · Push-button setting facilitates operation even with gloves on.

  Days to Ship:	66 Day(s) or more

• 

  Piccolo counter F870 series, small multipurpose integration counter.

  DANAHER

  A general use accumulating electromagnetic counter developed to be smaller.
  
  [Features]
  · The piccolo counter F870 series is a general use accumulating electromagnetic counter developed to respond to needs for very low cost by miniaturization for large volume use.
  · Can be used as a life meter, counter and the like apparatus, or for intensive calculation management for the purposes of small scale measurement or for large continuously accumulated computed values where the alphanumerics are easy to view.
  · The attachment of the panel is one-touch by the use of clip spring.
  · We suggest a rear-mounted type for compact use.

  Days to Ship:	9 Day(s) or more

• 

  MD-0 series electronic counter (total counter)

  LINESEKI

  [Features]
  · DIN72X72.
  · Zero suppression style large scale screen (14.22 × 8.13 mm).
  · Incorporates power source for use by sensors.
  · Uses both contact point and non-contact point input.

  Days to Ship:	18 Day(s) or more

• 

  MD-1 Series Electronic Counter (Preset Counter)

  LINESEKI

  [Features]
  · Zero suppression type large scale display (14.22 × 8.13 mm).
  · Incorporates power source for use by sensors.
  · The operating format may be selected using the surface terminal.
  · Employs an anti-duct type digital switch.
  · Setting may be changed during operation.
  · Both input and output avail of a connection point or no connection point.

  Days to Ship:	11 Day(s) or more

• 

  MDR-0 series electronic counter (total counter)

  LINESEKI

  [Features]
  · DIN72 × 72 mm.
  · Large scale display of the zero suppression type.
  · Incorporates a power source for use by sensors.
  · May be used in either of connected or disconnected input.
  · All apparatus have memory attached.

  Days to Ship:	18 Day(s) or more

• 

  Total counter/Time counter (DIN72 × 36) H7HP

  OMRON

  [Features]
  · Ease of view and IP66 oil resistant level water resistance, and DIN72 oil resistance × 36 size total counter/time counter.
  · Large scale display with an alphanumerics height of 15 mm in the 6 figure type and 12 mm in the 8 figure type.
  · Low power consumption enabled with the same visibility as LCD by the use of negative type LED and red color LED.
  · By using an integrated front part and casing and oil resistant materials for parts, it meets IP66 oil resistance and NEMA4.
  · Implements a short barrel shape with a neck-down length of 66mm.
  · The 6 figure type enables switching between total counter and time counter.
  · Flip switches NPN and PNP to deal with each input mode.
  · Can be both externally reset and manually reset.
  · With a finger safe terminal block cover for protection against electric shocks, which conforms to VDE0106Part100.
  · Safety standard UL, CSA acquired.
  · EMC (EN61326) compatible, corresponds to the CE mark.

  • Volume Discount

  Days to Ship:	9 Day(s) or more

• 

  Electron Counter (DIN48 × 48) - H7CN

  OMRON

  [Features]
  · DIN48 × 48 mm best-selling counter.
  · Employs a rotary thumb switch with simple operation.
  · A single function type with reduced functions.
  · No need for bothersome mode settings.
  · Compatible with a wide 12 to 48V range of DC power sources.
  · A total counter series.
  · The standard product has acquired UL and CSA standard.

  • Volume Discount

  Days to Ship:	9 Day(s) or more

• 

  Electronic Counter EA940LJ-1

  ESCO

  【Product Specifications】
  ・DIN48 x 48mm
  ・Single-stage setting
  ・Total preset Counter
  ・Type--1： H7CX-A-N, -2： H7CX-A11-N
  ・Attachment…Terminal block type

  Days to Ship:	9 Day(s) or more

• 

  Total Counter EA940LJ-11

  ESCO

  【Product Specifications】
  ・Type-H7GP
  ・Total counter of DIN48 x 24mm
  ・Character height-8.5mm
  ・Supports each input mode of NPN or PNP with the changeover switch.
  ・Supports both of external reset and manual reset.
  ・Color…Light gray
  ・Power supply…100 to 240VAC

  Days to Ship:	12 Day(s) or more

• 

  Total Counter EA940LJ-12

  ESCO

  【Product Specifications】
  ・Type-H7GP
  ・Total counter of DIN48 x 24mm
  ・Character height-8.5mm
  ・Supports each input mode of NPN or PNP with the changeover switch.
  ・Supports both of external reset and manual reset.
  ・Color…Light gray
  ・Power supply…12 to 24VDC

  Days to Ship:	13 Day(s) or more

• 

  Electronic Counter EA940LJ-2

  ESCO

  【Product Specifications】
  ・DIN48 x 48mm
  ・Single-stage setting
  ・Total preset Counter
  ・Type--1： H7CX-A-N, -2： H7CX-A11-N
  ・Attachment…Socket type

  Days to Ship:	13 Day(s) or more

• 

  Total Counter EA940LJ-21

  ESCO

  【Product Specifications】
  ・Type-H7GP
  ・Total counter of DIN48 x 24mm
  ・Character height-8.5mm
  ・Supports each input mode of NPN or PNP with the changeover switch.
  ・Supports both of external reset and manual reset.
  ・Color…Black
  ・Power supply…100 to 240VAC

  Days to Ship:	12 Day(s) or more

• 

  Total Counter EA940LJ-22

  ESCO

  【Product Specifications】
  ・Type-H7GP
  ・Total counter of DIN48 x 24mm
  ・Character height-8.5mm
  ・Supports each input mode of NPN or PNP with the changeover switch.
  ・Supports both of external reset and manual reset.
  ・Color…Black
  ・Power supply…12 to 24VDC

  Days to Ship:	13 Day(s) or more

Loading...