Terminal Block Boxes

• 

  Terminal Box, TMB Series

  TAKACHI ELECTRONICS ENCLOSURE

  Terminal Box (TMB)
  
  [Features]
  - This terminal box features an integrated box and terminal block.
  · Waterproofing and dustproofing grade of IP65.
  · The case is made of flame retardant ABS resin (UL94V-0).
  · The TMB-4P / 6P / 10P include a ⌀21 knockout.
  · When opening a hole, place a flat screwdriver in the position indicated in the following diagram and hit it hard with a hammer etc.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Relay BOX, TM-100□ Series

  TOYOGIKEN

  [Features]
  · The 100 Series is a plastic terminal box that is a good match for industrial facilities.
  · The box main body and the terminal unit are combined into a single unit, allowing users to really feel benefits in all aspects of their work processes.

  CAD ：

  2D

  Days to Ship:	1 Day(s) or more

• 

  Relay Box, Joy Box, W Series

  OHM ELECTRIC

  Classic Relay Box
  
  [Features]
  · Integrated cap-cone and terminal block.
  · Comes ready-to-use.
  - Number of terminal block poles: 5P, 7P, 11P

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Relay BOX, TM-200□ Series with Terminal Block

  TOYOGIKEN

  Uses highly durable and chemically resistant PBT (UL94-0) in its insulation materials outside the box main body.
  
  [Features]
  · 20 terminal blocks are mounted inside the BOX.
  · No machining has been performed on the BOX, so use after drilling as the specifications require.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Push-In Type Terminal Box with Terminal Block

  PHOENIX CONTACT

  This box is made from waterproof, dustproof ABS. It incorporates a push-in terminal block.
  With a "push-in terminal block," a stranded wire produced by crimping a ferrule terminal, or a solid wire, can be connected by simply pushing the wire into the connection port. The connection port can be opened and closed by pressing
  the orange button with an implement such as a Phillips screwdriver,
  enabling even a bare wire to be connected.
  
  We offer the following 3 products. Each has a different number of electrodes.
  (1) E AB A 85 x 83 x 60 6MPT (6-electrode terminal block)
  (2) E AB A 130 x 80 x 60 12MPT (12-electrode terminal block)
  (3) E AB A 180 x 130 x 100 20MPT (20-electrode terminal block)
  
  [Specifications]
  ● Box material: ABS UL94 V-0
  ● Operating temperature range: -40 to 70°C
  ● DIN rail: 15 mm wide ((1) and (2), 35mm wide (3))
  ● Protection grade: IP66
  ● Conforming wire size: 0.14 to 2.5 mm2² for stranded wire; 0.14 to 2.35 mm2² for ferrule terminal with sleeve
  ● Stripping length: 8 to 10mm
  ● Rated voltage: 500V ((1) and (2)), 800V ((3))
  ● Rated current: 24A

  Days to Ship:	8 Day(s) or more

• 

  Waterproof relay box, Joy Box JB-WST series

  OHM ELECTRIC

  Conforms to protection grade IP67. Slim and compact multi-function type. For relaying sensor wires in spaces where there are height restrictions.
  
  [Features]
  · While slim and compact, the opposing terminal screw specification provides a greater range of applications.
  · The lid is fixed at 2 points so the duration of work can be shortened. (Excluding JB-WST306 (E))
  · Possible to install in narrow places such as frames which are otherwise difficult using only conventional mounting holes. * Hole drilling required
  · It can conform to IP67 by using seal washers. (See the catalog PDF for recommended seal washers)

  Days to Ship:	8 Day(s) or more

• 

  Plastic Terminal Block Box, BOXTM Series

  MISUMI

  [Features]An optimal terminal block enclosure for relay. ● A lightweight enclosure that integrates a terminal block and a box. ●It is ideal for relaying in a part where the cable thickness and type change, such as for sensor inputs and solenoid valve outputs.

  • Volume Discount

  • IP67
  • IP65
  • Plastic

  CAD ：

  2D

  Days to Ship:	Same day

• 

  TMC Model Waterproof/Dustproof Terminal Box with Cable Gland

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • This terminal box consists of a cable ground built together with a terminal mount.
  • Direct terminal box ideal for industrial equipment and construction machines power cables, motor relays, and sensor relays.
  • The protection level corresponds to IP65, and the box material is made from oil-resistant PBT.
  • The terminal mount can be chosen from 3P, 4P, and 6P varieties.
  • The cable rubber bush includes both ⌀5 and ⌀7.4 varieties.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Plastic Terminal Block Box, BOXTC Series

  MISUMI

  4-pole and 6-pole model terminal block box

  • Volume Discount

  • IP65
  • Plastic

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Plastic Terminal Block Box, without Cable Clamp Model

  MISUMI

  [Features]A chemical resistant terminal block enclosure. ● A lightweight enclosure that integrates a terminal block and a box. ●It is ideal for relaying in a part where the cable thickness and type change, such as for sensor inputs and solenoid valve outputs.

  • Volume Discount

  • IP67
  • IP65
  • Plastic

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Relay Box, TC Series

  TOYOGIKEN

  The BOX and terminal block are integrated, making it small and lightweight, so it is ideal for relay wiring of sensors, solenoids etc.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Terminal Block Box, with Lid Model

  MISUMI

  A junction box for screw mounting of lid. A wide variety of terminal blocks with 4 to 40 positions are available.

  • Volume Discount

  • Space-saving
  • Steel
  • Fixed Size

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  JOIBOX waterproof junction box, JB-WLQ series

  OHM ELECTRIC

  The neat and easy way to store sensor amplifiers and terminal blocks. Makes construction and maintenance jobs considerably easier.
  Oil-resistant and weatherproof. Use for a variety of applications. Models provided a terminal block and pressure-adjustment plug also available.
  
  [Features]
  - Opens and closes at a single touch. Secured with a single screw, saving time and effort to open and close.
  - The hinged lid is attached to the main body, ensuring it will never fall off.
  - The hinged design and IP67-grade protective structure stops water and dust from entering the interior.
  - Transparent polyarylate lid with excellent chemical resistance. View the interior without opening the lid.
  * Available with a transparent lid (in brown) or a beige-colored lid (made from PBT resin).
  - Two types of lid are available: high-roof or low-roof. Select the lid height to suit your storage needs.
  - Hole-punching location is pre-marked, saving you the trouble of doing the marking-off yourself and increasing work efficiency.
  - Wide choice of models. Models with a terminal block, DIN rail, pressure-adjustment plug and hole are available.
  [Box size]
  - JB-WLQ100BJ series: Width 120mm x length 116mm x height 74mm
  - JB-WLQ135BJ series: Width 135mm x length 151mm x height 82 (121)mm
  - JB-WLQ220BJ series: Width 220mm x length 151mm x height 82 (121)mm
  *Figures shown in brackets refer to high-roof lid models.

  Days to Ship:	13 Day(s) or more

• 

  Relay BOX, TB Series

  TOYOGIKEN

  [Features]
  · The box main body and the terminal block use a PBT resin with superior environmental properties.
  · Because the terminal block and the dividing plate are removable, wiring can be performed externally and then installed within the box.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Relay Box, Joybox, WP Series

  OHM ELECTRIC

  Includes internal terminal block for relaying of power lines and motor wiring
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · Number of terminal block leads: 6P

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  Steel Terminal Block Box, with Door Model

  MISUMI

  An open/close type junction box. A wide variety of terminal blocks with 4 to 40 positions are available.

  • Volume Discount

  • Space-saving
  • Steel
  • Fixed Size

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  TMA Type Aluminum Die Cast Terminal Box

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · This is an aluminum die-cast terminal box which exhibits superior shock resistance corresponding to protection class IP65.
  Aluminum die-cast construction is superior to resin in terms of heat dissipation, heat resistance, and oil resistance.
  · Terminal lead number ranges from 6P to 30P, and a total of 6 sizes are available.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Joi Box "JB-W Series"

  OHMI SEIKI

  Days to Ship:	1 Day(s) or more

• 

  Box Terminal

  TOYOGIKEN

  Days to Ship:	1 Day(s) or more

• 

  BOXTM-40* Series

  TOYOGIKEN

  The 40□ series is a plastic terminal box that matches industrial facilities. The box unit and terminal unit are integrated, so you can experience the benefits in various work processes.

  CAD ：

  2D

  Days to Ship:	1 Day(s)

• 

  Relay Box, Joybox, WB Series

  OHM ELECTRIC

  Just install the DIN rail to set up a flexible or sensor wiring relay
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · A DIN rail or block-type terminal block can be added

  Days to Ship:	13 Day(s) or more

• 

  Waterproof Relay Terminal Box JPBS04/JPBS06

  PATLITE (KASUGA)

  [Features]
  · A nylon alloy is used made from a resin material with superior weather and oil resistance.
  · Lowering the case-side wall from the terminal portion results in a structure that enables easy wiring.
  · A nameplate can be affixed to the flat space on the cover.
  · Protection structure IP67.

  Days to Ship:	16 Day(s) or more

• 

  Relay BOX, TM-80□ Series

  TOYOGIKEN

  [Features]
  · The 80 Series is a plastic terminal box that is a good match for industrial facilities.
  · The box main body and the terminal unit are combined into a single unit, allowing users to really feel benefits in all aspects of their work processes.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Relay Box, Joybox, WG Series

  OHM ELECTRIC

  For flexible and sensor wiring relays
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · Number of terminal block leads: 6P

  Days to Ship:	11 Day(s) or more

• 

  Relay Box, Joybox, W44 Series

  OHM ELECTRIC

  For relaying of solenoids, sensors, and motor lines
  
  [Features]
  · Integrated cap-cone and terminal block for immediate use.
  · Round terminals can be connected without removing the terminal screws.
  · Rubber bushings included to support a wide variety of line widths

  Days to Ship:	16 Day(s) or more

• 

  BP14-T - Box with Terminal

  NITTO KOGYO

  [Features]
  - Terminal block has a labor-saving unified structure within the box.
  - Uses reinforced PBT and nylon materials. Has excellent environmental resistance and oil resistance.
  - Makes possible the high airtight performance of the IP65. (BP14-T401 = IP67) The BP14-T801 has one waterproof cap attached.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  Relay Box, Joy Box, WS Series

  OHM ELECTRIC

  For relay of sensor lines
  
  [Features]
  · Integrated cap-cone and terminal block.
  · Comes ready-to-use.
  · Can be installed in narrow spaces thanks to its compact size.
  · Number of terminal block leads: 3P, 4P, 7P

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Waterproof Relay Terminal Box (Female-Threaded Type)

  PATLITE (KASUGA)

  A waterproof relay terminal enclosure with excellent oil resistance and waterproofness (IP67).
  [Features]
  ・ Since it has a gentle shape with a lot of rounded corners, it can be used comfortably even on machine tools, food machines, industrial equipment, etc.
  ・ The cable gland can be selected according to the intended use
  ・ One-to-one connection for easy wiring work
  ・ Female thread type can also be used for metal flex
  [Applications]
  ・ Ideal for relaying small motors and sensors
  ・ Ideal for space saving and wire saving

  Days to Ship:	16 Day(s) or more

• 

  Aluminum Die Cast Terminal Block Box, TBTC TBTH【2 Pieces Per Package】

  MISUMI

  A high-performance aluminum terminal block enclosure with dust-proof and waterproof functions. Can be used in various scenes.

  • Volume Discount

  • IP67
  • Aluminum Die Cast
  • Fixed Size

  Days to Ship:	12 Day(s) or more

• 

  Relay Box, Joybox, WR Series

  OHM ELECTRIC

  Includes internal spring type terminal block for relaying of power lines and motor wiring
  
  [Features]
  · Conforms to IP67 protective structure requirements (lid is waterproof and the wire insertion opening uses a mounting connector).
  · Number of terminal block leads: 6P

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

Loading...