Installation Parts

• 

  Supporter (Low Voltage Insulated Supporter to the Conductor)【25-50 Pieces Per Package】

  SHINOHARA ELECTRIC

  [Features]
  · Eliminates the time and labor needed for conventional manual processing of insulators.
  · Parts for installation are available in 2 types: one with nuts on both ends (S/T/D type) and one with nuts and bolts (SB/TB/DB type). Available in a variety of specifications with different heights and diameters for use in different applications.
  · Excellent insulating properties (withstand voltage: 2.5 kV, 1 min.) and lightweight.
  · Compact size will not interfere with adjacent screws, etc.
  · Made of polypropylene. (Black)
  [Applications]
  · Insulating base for mounting equipment such as distribution boards, control panels and rectifier panels.
  · As an insulation support for bus bar and electrical wiring.
  · Can also be used as a base for branching wires by attaching a branching bracket.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  BP16-MB Eye Bolt Hole Blind Bolt【4-20 Pieces Per Package】

  NITTO KOGYO

  [Features]
  • Use the BP16-MB series as a blind bolt when removing eye bolts.

  Days to Ship:	10 Day(s) or more

• 

  SS Bushing【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used as an induction bushing for door opening and closing shaft.
  
  [Features]
  - The taper of the bushing smoothly guides the shaft into the locking aperture when locking the door.
  - Protects against noise caused by vibration.
  - Peeling of the coating around the lock aperture caused by opening and closing of the lock shaft is eliminated, preventing rust formation.
  - Mounting of the bushing can be performed in a single operation by simply pushing it in.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Switch Crossover Bar【100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Can be used for switch crossover wiring
  
  [Features]
  · Streamlining of wiring through use on transition wiring for common lines of switches.
  · The exposed part is insulation coated, and is therefore safe.
  · The insertion conformation is forked (Y-shaped).
  · Installation and removal are easy.
  · Final wiring result is particularly clean for operation panels, etc. with a large number of different switch types.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Eye Bolt, EB-8S to EB-24S【10-200 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use the eye bolts for suspending various types of panels.
  
  [Features]
  · The eye bolts have been manufactured based on the JIS-B1168 standard.

  Days to Ship:	22 Day(s) or more

• 

  Extensive EIA Rack Stowing Shelf, SRE Series

  TAKACHI ELECTRONICS ENCLOSURE

  Extensive EIA rack storage shelf (SRE)
  
  [Features]
  · Storage shelf for a 19” EIA standard rack.
  · Can also be installed in a 19” cabinet rack.
  · Wide, for effective use of storage surface.
  · Beige and black are available and can be selected in accordance with devices.
  · For SRE44-315/420, the shelf board and side boards are integrated.
  · On rare occasions, rack opening dimensions will differ by manufacturer, so confirm the dimensions before use.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  EIA Rack Sliding Table, NST Series

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Sliding Table (NST Series)
  
  [Features]
  - Reinforcing fixture for secure fixing.
  - Lock fixture to prevent falls when pulling out the table and to prevent table overhang.
  - If the table is turned upside down, it can be used as a drawer.
  - Attach the included protective sponge to the right and left side interiors before use.
  · Rack opening dimensions may differ by manufacturer, so confirm the dimensions before use.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  EX-BR / Circuit Board Attachment Rail【2 Pieces Per Package】

  NITTO KOGYO

  EX-BR series can be used for the attachment and detachment of iron sheets.
  
  [Features]
  · Can be used for the attachment and detachment of iron sheets.
  · Useful for saving on labor since the board does not need to be lifted.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  TB / IEC Rail (35 mm width)【10 Pieces Per Package】

  NITTO KOGYO

  [Features]
  - Use the TB series with an M4 holder (PLX-HA) when mounting IEC rail mounting equipment to the body.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  BP21 / Panel Rail (1) (for B, S, BF, SF Cabinet Door backs)

  NITTO KOGYO

  BP21-A series allows mounting of a panel rail (1) via countersinking holes on the top and bottom of a cabinet door.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  BP21/ Circuit Board Rail

  NITTO KOGYO

  BP21 series allows mounting of a panel rail (1) via countersinking holes on the top and bottom of a door (B, S, BF, SF).

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  PTMX-H - Holder - Tie Tape Set

  NITTO KOGYO

  [Features]
  ∙ Support lock, equipment, and back wiring with multiple options.
  ∙ Use while mounting direct equipment on the lattice shape body.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  BP16 / Board Mount Stabilizing Plate

  NITTO KOGYO

  BP16 series features a flat design.
  
  [Features]
  · A flat design.
  · Use to prevent cabinet tipping.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  BP21 / Panel Rail (3) RA / RAV / PD / D / RUL For Cabinet Door Back Panel

  NITTO KOGYO

  Use the BP21-C series as an all-purpose panel attachment rail.
  
  [Features]
  · The upper and lower door surfaces include a sunken depression for attaching a board rail (B, S, BF, SF).

  Days to Ship:	10 Day(s) or more

• 

  BP22-M - Meter Panel

  NITTO KOGYO

  [Features]
  · Use to mount various instruments inside the cabinet.
  ∙ Depth is adjustable in 20 mm pitch by using bar hinge adjustment.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Adjustable Fixed Bar for Lightweight Partitions, KGP Series

  MIRAI INDUSTRY

  [Features]
  - Simple installation with single-sided mounting.
  - Use to mount a box to a lightweight partition wall.
  - No need to purchase accessories for different stud sizes or types; this is all you need to mount a box.
  - Convenient for locations with narrow stud spacing (can be used even when cut down).
  - Use the included double-sided tape for temporary fastening is possible; mounting to lightweight studs is also simple.
  - The manufacturer's slide box includes holes for mounting, so it can be easily mounted to the center (vertical) position of an adjustable fixed bar (exclusions apply).
  - The KGP-230 (total length 230 mm) can be mounted to any location, provided the studs are installed at an interval of 450 mm.
  - The slide box (thickness 36mm) will fit right in if you align the box with the stud end before mounting.

  Days to Ship:	16 Day(s) or more

• 

  Tilt Stand PS Series

  SETTSUMETAL

  [Features]
  · General purpose tilt stand.
  · Mount when tilting the case for use.
  · Specified holes can be provided on the case bottom and the like for installation using commercially available M3 screws and nuts.

  Days to Ship:	16 Day(s) or more

Loading...