Fans (Options, Others)（Type：Other）

• 

  Temperature Switch for Heater

  ORIENTAL MOTOR

  "Heater" switch that controls ON/OFF according to the temperature change in the device.
  [Features]
  ・ The heater temperature switch AM2-XB1 automatically controls the operation/stop of the heater according to the temperature change inside the device
  ・ Turns off the heater at the set temperature, and turns on again when the temperature drops by 4°C
  ・ Contributes to energy saving operation of the heater
  ・ It is a switch that turns off the contact of the heater temperature switch when the set temperature is reached
  ・ As the heater can be turned on/off according to the set temperature, the power consumption of the heater can be reduced

  Days to Ship:	16 Day(s) or more

• 

  Plug Cord for 160 mm x 160 mm - 51 mm Thick AC Fan

  SANYO DENKI

  [Features]
  ▪ Cord for supplying alternating current (AC) power to an AC Fan.
  · Cord branches into lead wires.
  - For □160 × 51 mm thickness.

  Days to Ship:	16 Day(s) or more

• 

  PWM Controller

  SANYO DENKI

  Helps lower power consumed and noise produced by equipment
  
  ■Features
  ·Helps lower power consumed and noise produced by equipment.
  A newly designed PWM circuit is needed for PWM control function.
  .
  Using this product enables utilization of a fan with PWM control function without designing a new circuit, contributing to reducing the power consumed and noise produced by equipment.
  .
  ·Power supply shared with fan
  Power supply can be shared with 12, 24 and 48 V rated voltage fans.
  ·Connect up to four fans
  Connect and use up to four fans with PWM control function.
  
  ■Common specifications
  ·Rated Voltage [V]: 12/24/48
  ·Power Consumption [W]: 0.2 *When output terminal is open
  ·Operating Temperature Range [°C]: -20 to +70
  
  [Input Terminal]
  ·Power Supply Input Range [V] (V+, V-): 7 to 60
  ·Control Voltage Range [V]: 0 to 5.5
  
  [Output Terminal]
  ·PWM Signal Output: High-level voltage (VOH): Selectable between 3.3 V or 5 V
  ·PWM Frequency [kHz]: 25
  ·Input/Output Current: 20 mA or less (4 terminals total)
  ·Output Withstand Voltage [V]: 6.5
  ·Maximum Number of Connectable Fans: Up to 4
  

  Days to Ship:	16 Day(s) or more

• 

  Screen

  ORIENTAL MOTOR

  Stainless steel mesh.
  
  [Features]
  · When cooling equipment that produces electromagnetic radiation, such as electronic equipment, etc., electromagnetic radiation can leak through holes for the air exchange fan, producing electromagnetic interference in other computers and measurement equipment.
  · The screen allows air to flow through while blocking electromagnetic radiation.
  · A corrugated stainless steel mesh is anchored to the aluminum frame, ensuring the the magnetic shield exhibits superior durability.
  · The fan is used after being anchored in place with screws.

  Days to Ship:	15 Day(s) or more

• 

  Temperature Switch for Fan Motor

  ORIENTAL MOTOR

  "Fan motor" switch that controls ON/OFF according to the temperature change in the device.
  [Features]
  ・ The fan temperature switch AM2-XA1 automatically controls the operation/stop of the fan according to the temperature change inside the device
  ・ Contributes to performance improvement of equipment related to "environment" such as energy saving and low noise
  ・ It is a switch that turns on the contact of the temperature switch when the set temperature is reached
  ・ By using it together with the fan, you can control the fan ON/OFF according to the set temperature, so you can reduce the power consumption of the fan

  Days to Ship:	16 Day(s) or more

• 

  Accessory For Filter Fan - Filter Louver

  RITTAL

  To ventilate by convection, you can install the Filter Louver on the top and bottom of the enclosure.
  
  [Product specifications]
  · Materials: ABS plastic (UL 94-5VA compliant)
  · Paint color: RAL 7035
  · Protection grade: IP 54 (including filter mat)
  [Bundled items]
  · Filter louver, filter mat

  Days to Ship:	10 Day(s) or more

• 

  Plug Cord for 120 mm x 120 mm - 38 mm Thick AC Fan

  SANYO DENKI

  [Features]
  ▪ Cord for supplying alternating current (AC) power to an AC Fan.
  · Cord branches into lead wires.
  - For □120 × 38 mm thickness.

  Days to Ship:	15 Day(s) or more

• 

  Plug Cord for 160 mm x 160 mm - 51 mm Thick AC Fan, ⌀172 × 51 (L Form)

  SANYO DENKI

  [Features]
  ▪ Cord for supplying alternating current (AC) power to an AC Fan.
  · Cord branches into lead wires.

  Days to Ship:	8 Day(s) or more

• 

  Plug Cord for 80 mm x 80 mm / 92 mm x 92 mm / 120 mm x 120 mm - 25 mm Thick AC Fan

  SANYO DENKI

  [Features]
  ▪ Cord for supplying alternating current (AC) power to an AC Fan.
  · Cord branches into lead wires.
  - For □80/□92/□120 × 25 mm thickness.

  Days to Ship:	16 Day(s) or more

• 

  Plug Cord for 80 mm x 80 mm - 42 mm Thick AC Fan

  SANYO DENKI

  [Features]
  ▪ Cord for supplying alternating current (AC) power to an AC Fan.
  · Cord branches into lead wires.
  - For □80 × 42 mm thickness.

  Days to Ship:	15 Day(s) or more

• 

  Cooling Fan Base【1-5 Pieces Per Package】

  SHINOHARA ELECTRIC

  Useful for cooling internal panel parts
  
  [Features]
  · Installation is simple.
  · Conventional installation work is not required, saving work time

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Ventilation fan hood (for outdoor use: FK type) IPX4

  SHINOHARA ELECTRIC

  This fan's included is good for dealing with wind and rain.
  
  [Features]
  - Simple installation.
  - Just snap it into the panel holes from the surface and screw in from the underside to install.
  - A hood, fan, finger guard and power supply cord (1m) are included as a single ready-to-go set.
  - Use a presser plate to assemble a larger hood if you need to adjust the hood opening for the fan diameter.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  BX-L Ventilating Fan Mounting Bracket and Ventilating Fan Mounting Bracket (with Ventilating Fan)

  NITTO KOGYO

  [Features]
  Use the bracket to mount a ventilation fan on the door/body of the thermal components storing cabinet (BL(S) S-L(S)).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  RD44 Filter Fixing Tape

  NITTO KOGYO

  [Features]
  • The RD44-FT series can be used as tape for filter mounting.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Blower Mounting Bracket

  ORIENTAL MOTOR

  A metal fitting for attaching the motor part of a blower that maximizes static pressure and blows directional air.

  Days to Ship:	15 Day(s) or more

• 

  Plug Cord for Power Connections

  ORIENTAL MOTOR

  This is a cord with included plug which is compatible with MU Series / MS Series power supply terminals.
  
  [Features]
  · This is a plug-in cord which can be used for MU Series and MS Series fans which are connected to a power supply via a terminal connection.

  Days to Ship:	15 Day(s) or more

• 

  Duct Fitting for Discharge Ports

  ORIENTAL MOTOR

  [Features]
  ・ A joint for connecting the blower outlet and duct

  Days to Ship:	15 Day(s) or more

• 

  Logic Inversion Module

  ORIENTAL MOTOR

  Module that can reverse the logic of signals and can be used for various purposes.
  [Features]
  ・ Allows connection to devices whose output signal logic does not match
  ・ Equipped with 2 logic inversion circuits
  ・ Secure output that can drive the relay
  ・ DIN rail mounting
  ・ Easy and reliable with terminal block connection
  ・ Metal part: SPCC
  ・ Surface treatment: Electroless nickel plating

  Days to Ship:	15 Day(s) or more

• 

  Intake port duct joint

  ORIENTAL MOTOR

  [Features]
  • Intake port duct joint for connecting the blower outtake port and duct.

  Days to Ship:	15 Day(s) or more

• 

  Accessory For Filter Fan - Spare Filter Mat【5 Pieces Per Package】

  RITTAL

  Reliably removes most dust particles less than 10 μm in size.
  Can withstand temperatures up to 100°C (made of random nonwoven fabric with a stepped structure)

  Days to Ship:	10 Day(s) or more

Loading...