Racks (Options, Others)

• 

  Fall Prevention Bar for BR Type Rack Storage Shelves

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The shelf boards can be used for all models.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  EP Type Aluminum Rack Panel

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · An EP type aluminum rack panel.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  LR type Rack Storage Shelve Support Angle

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · LR type rack storage shelf support angle.
  · Hole positions are fixed to match the heat dissipation holes of HRE/HRJ type storage shelves, so please attach using the included screw set.
  · 3-ø4.5 hole drilling is required when using with other shelf boards.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  M Type Rack Mount Bracket【1-2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · An M type rack mounting bracket.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Voice I/O Connector Panel with NNP Type Nameplate Connection Bar

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · An NNP type audio input/output connector panel with nameplates and a connection bar.
  · Includes nameplates for preventing misconnections and a connection bar that helps with cable routing.
  · Extra holes can be hidden by purchasing the cover plate sold separately (NCP-26B).

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PCB Type PC Board Holder【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  A PCB type PC board holder
  
  [Features]
  · Use when mounting PC boards to panels.
  · There is no conduction because it is resin.
  · Can be used with 100 mm height PC boards.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  SHF Bracket, RKP Series

  SETTSUMETAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Adjust the guide frame and connector frame up and down using the sub H frame when storing PCB with non-compatible dimensions or when installing a connector with extreme dimensions. This is a part for attaching a guide frame and connector frame to the sub H frame in this situation.
  · Tighten both sides of the guide frame C or the connector frame G with M4 panhead screws.
  · Use either the sub H, sub W or border D frame accessories to directly attach this bracket to the sub rack.

  Days to Ship:	16 Day(s) or more

• 

  Guide Frame C RKP Series

  SETTSUMETAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · A frame to mount card guide 2 (RKP-□□□CG□2).
  · This frame has a card guide mounting hole (φ4.2) at a 6.35 mm (1/4 inch) pitch.
  · One of the two ways to use this frame is to attach a GWF slide piece to both sides.
  Then there is the mounting method for the SHF bracket on each side.
  For details, refer to pieces for GWF slides (RKP-4GSA) or brackets for SHF (RKP-34BTA).

  Days to Ship:	16 Day(s) or more

• 

  Connector frame G RKP series

  SETTSUMETAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · Frame for mounting edge board connectors, DIN connectors, etc.
  · φ3.2 holes drilled at 6.35 mm (1/4") pitch.
  · When the mounting position of the connector matches the center of the card guide, such as with edge board connectors, attach the spacer with the "EDGE" engraved stamp and attach SHF brackets to both ends.
  · When the mounting position of the connector is displaced from the center of the card guide by 4.35 mm to the right, such as with DIN connectors, attach the spacer with the "DIN" engraved stamp and attach SHF brackets to both ends.
  · Looking at the sub rack from the back, use either the sub H or sub W frame accessories to directly attach this frame to the sub rack., making sure the part marked "TOP" is up and "BOTTOM" is down.
  · The strongest frame among the connector frames.

  Days to Ship:	16 Day(s) or more

• 

  Top Cover RKP Series

  SETTSUMETAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · It also serves as internal protection that functions as a dust cover, and can be used as a desktop.
  · Inserts to the W frame of the RMU series through use with the top board holder.
  · This cover is designed with a flat plate shape to make drilling easier.

  Days to Ship:	16 Day(s) or more

• 

  Top Bottom Cover, RKP Series

  SETTSUMETAL

  [Features]
  · Accessory for Sub Rack RKU2 series.
  · It serves as internal protection that functions as a dust cover, and can also be used as a desktop. Parts can be installed depending on the situation.
  · Because insertion is from the back in this structure, the feet can be removed and reinstalled after main unit assembly is complete.

  Days to Ship:	16 Day(s) or more

• 

  Screw Set ZM Series【10 Pieces Per Package】

  SETTSUMETAL

  [Features]
  · A metric screw that fixes the card lock retainer or the card retainer to the PCB.

  Days to Ship:	16 Day(s) or more

• 

  Hinge RKP Series

  SETTSUMETAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · A hinge used for opening and closing front panels.
  · Attach the rotor side to the front panel and the stator to the RKU series W frame.
  · Depending on how the stator is attached, two functions can be performed: vertical and horizontal opening and closing.
  · In other words, the stator must face vertically for the horizontal open/close type, while it should face horizontally for the vertical open/close type.
  · Two knob screws and E rings each are included for fixing the front panel.
  · In the left and right opening/closing type, whether it opens right or left is determined depending on whether the stator is attached to left or right.
  · The front panel of the front and rear opening and closing type is made to stop at a roughly horizontal point when completely open.

  Days to Ship:	16 Day(s) or more

• 

  Front Panel A RKP Series

  SETTSUMETAL

  [Features]
  · Accessory for unit cases from the RMU series.
  · I/O connectors and other operation accessories can be attached to this fixed type front panel.
  · This panel has a flat plate shape that makes drilling holes easy.
  · Naturally, it can also be used for the rear section.
  · Mount to the front and rear part of the RMU series with M3 screws.

  Days to Ship:	16 Day(s) or more

• 

  Accessory For PC Enclosure - Handle Adapter

  RITTAL

  Use this when installing the quick handle in the slanted design part of the door profile. The handle adapter is required.
  

  Days to Ship:	10 Day(s) or more

• 

  PC Accessory, for Padlocks and Lock Inserts

  RITTAL

  The handle moves back and forth, ensuring maximum installation space for instrumentation and other equipment.

  Days to Ship:	10 Day(s) or more

• 

  Accessory For PC Enclosure - Swing Table (Applicable Door Width 600 mm)

  RITTAL

  Used for temporary storage of programming equipment, etc. When working, you can pull it out immediately,
  and when it is not needed, you can fit it between the door frames to save space.
  
  [Product specifications]
  · Materials: steel plate
  · Paint color: RAL 7035
  · Load resistance: max 30 kg

  Days to Ship:	10 Day(s) or more

• 

  Accessory For PC Enclosure - Small Mounting Plate

  RITTAL

  This can also be used in combination with a system section or support rails as needed to match the look of the room.
  Allows failed units to be replaced easily and promptly.

  Days to Ship:	10 Day(s) or more

• 

  PC Accessory, TS System Section, 17 × 73 mm【4 Pieces Per Package】

  RITTAL

  Features a sequence of five holes to enable mounting in any frame or partial mounting. Mounting in the TS holes can be done easily in the manner of a latching device.

  Days to Ship:	10 Day(s) or more

• 

  Accessories for PC Enclosure, TS System Section 17 × 73 mm【4 Pieces Per Package】

  RITTAL

  Features a sequence of five holes to enable mounting in any frame or partial mounting. Mounting in the TS holes can be done easily in the manner of a latching device.
  

  Days to Ship:	10 Day(s) or more

• 

  Accessory For PC Enclosure - Unit Table, Fixed Frame Type (For 800 mm Width)

  RITTAL

  For installing the enclosure without using a 19-inch mounting rail.
  You can also make this a slide table by combining it with the slide rails.
  
  [Product specifications]
  · Materials: steel
  · Paint color: RAL 7035
  [Bundled items]
  · Includes mounting parts

  Days to Ship:	10 Day(s) or more

Loading...