Power Strips Compliant with Japanese Standards（Function：Lightning Surge）

• 

  OA Tap Lightning-resistant Surge Triple Tap A-300SB (W)

  ELPA

  [Features]
  ELPA Power Strip - Rated capacity: AC 125 V 15 A. Total: up to 1,500 W. Number of outlets: 3. For indoor use only. Color: white

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Multiple Outlets, 3P 7 Outlets 2M

  ELPA

  A power strip for office equipment with a removal prevention outlet and a magnet on the back.
  [Features]
  ・ Plug removal prevention
  ・ Equipped with a lightning surge protection function that reduces equipment from lightning damage
  ・ Undesired arcing plug to prevent undesired arcing fire
  ・ It is a centralized switch so that the power supply of the equipment can be turned on and off at once
  [Applications]
  ・ For offices that are constantly connected to equipment

  Days to Ship:	12 Day(s) or more

• 

  Surge Protector Power Strip

  ELECOM

  Lightning protection power strip with a built-in, high-performance, lightning surge-absorbing element for protecting electrical equipment against lightning surges.
  [Features]
  · Since it has a built-in high-performance lightning surge absorber (varistor) with a maximum surge voltage of 12,500 V, it is effective in preventing damage to electronic devices such as personal computers and AV devices due to lightning.
  (Maximum surge voltage of 12,500 V is a value based on JEC210/212 standard.)
  · The heat-resistant UF resin is used for the outlet, and it is difficult to melt even if heat is generated, and it is effective in preventing electric fire.
  · An insulation cap is attached to the root of the plug blade to help prevent fire caused by undesired arcing.
  · The power cord uses a double-jacketed coating that compliant with the Japan Electrical Wiring System Industries Association standard (JWDS0010), so it is effective in preventing electric shock and fire due to wire break or tearing of the coating.
  · It uses a 180° swivel plug that is easy to wire even in a narrow space.

  Days to Ship:	12 Day(s) or more

• 

  General-Purpose Power Strip, Retaining, 2 Ports

  AMERICAN DENKI

  A retainer model power strip with 2 sockets that support rated current of 15 A - 125 V
  
  [Features]
  · A new model equipped with a varistor with a lightning surge-resistant function has been introduced in the general purpose power strip series with a slim design enabling improved space-saving.
  · Equipment is protected from lightning surge that enters from power lines and ground lines, and that are produced by direct lightning strikes and induced lightning from lightning clouds.
  · The standard has an LED to confirm electrification, and the model with lightning surge protection has an LED to confirm function operation.
  · Both models have magnets on the back surface.

  Days to Ship:	12 Day(s) or more

• 

  General-Purpose Power Strip Retaining 4 Ports

  AMERICAN DENKI

  A retainer model power strip with 4 sockets that support rated current of 15 A - 125 V
  
  [Features]
  · A new model equipped with a varistor with a lightning surge-resistant function has been introduced in the general purpose power strip series with a slim design enabling improved space-saving.
  · Equipment is protected from lightning surge that enters from power lines and ground lines, and that are produced by direct lightning strikes and induced lightning from lightning clouds.
  · The standard has an LED to confirm electrification, and the model with lightning surge protection has an LED to confirm function operation.
  · Both models have magnets on the back surface.

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Multiple Outlets, 2P 7 Outlets 2M

  ELPA

  A power strip for office equipment with a removal prevention outlet and a magnet on the back.
  [Features]
  ・ Plug removal prevention
  ・ Equipped with a lightning surge protection function that reduces equipment from lightning damage
  ・ Undesired arcing plug to prevent undesired arcing fire
  ・ It is a centralized switch so that the power supply of the equipment can be turned on and off at once
  [Applications]
  ・ For offices that are constantly connected to equipment

  Days to Ship:	12 Day(s) or more

• 

  OA Tap Lightning Surge Swing Tap A-362SB (W)

  ELPA

  [Features]
  ELPA standard: AC125V 15A. Total: up to 1,500 W. Number of outlets: 3. For indoor use only. Color: white with anti-surge function.

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, with Surge Protector

  ELPA

  [Features]
  ELPA power strip - rated capacity: AC 125 V 15 A. Total: up to 1,500 W. Number of outlets: 3. For indoor use only. Color: white

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Individual SW with Surge Protector - 3 Outlets

  ELPA

  [Features]
  ELPA Power Strip with Individual Switches - Rated: AC 125 V, 15 A. Total: up to 1,500 W. Number of outlets: 3. For indoor use only. Color: white

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Side Corner Outlets with Surge Protector

  ELPA

  [Features]
  ELPA power strip - rated: AC 125 V 15 A. Total: up to 1,500 W. Number of outlets: 3. For indoor use only. Color: white with anti-surge function

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Concentrated SW with Surge Protector - 3 Outlets

  ELPA

  Lightning surge protection breaker, power strip with switch with built-in.
  [Features]
  ・ Built-in surge reduction element (varistor) reduces lightning and switching surges and protects connected equipment
  ・ Prevent undesired arcing fire with undesired arcing cover
  ・ The main body uses heat-resistant UF resin
  ・ Product performance: Varistor 240 V / limit voltage 395 V / maximum surge voltage 2,500 V
  [Applications]
  ・ When you want to protect devices such as PCs from lightning

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Front Outlets with Surge Protector

  ELPA

  [Features]
  ELPA front power strip - rated capacity: AC 125 V 15 A. Total: up to 1,500 W. Number of outlets: 3. For indoor use only. Color: white

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, 5 Outlets with Surge Protector

  ELPA

  Lightning surge protection that protects equipment from lightning, power strip with switch.
  [Features]
  ・ Built-in surge reduction element (varistor) reduces lightning and switching surges and protects connected equipment
  ・ Undesired-arcing resistant cover prevents tracking fire
  ・ Switch with pilot lamp at each outlet
  ・ The main body uses flame-retardant ABS resin that is strong against impact, and the insertion port uses UF resin that is strong against heat
  [Operating]
  ・ When you want to protect devices such as PCs from lightning

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, Desk Outlets

  ELPA

  Ideal for securing power supply around your desk.
  [Features]
  ・ It can be easily attached to a desk, etc., with a screw clamp
  ・ The insertion port is diagonal, making it easy to insert and remove the plug from the front
  ・ Since the cord is pointing downwards, it is possible to perform neat wiring even in narrow places such as between desks and walls
  ・ With centralized switch, it is possible to turn on/off all the devices in use at once without removing the plug
  [Applications]
  ・ Ideal for a neat installation on a desk

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, for Office Use, 4 Outlets

  ELPA

  ELPA power strip body. Made in Japan. 4 outlets. Retainer. Ground supported. Magnet attached on the back of the main body. Cord having high coating strength and less prone to breakage. Grounding Adapter AccessoryWith Standard and Lightening Protection Functions

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, for Office Use, 6 Outlets

  ELPA

  ELPA outlet power splitter main body made in Japan. 6 outlets. Anti-slippage ground installation type. Ground supported. Magnet attached on the back of the main body. Cord boasts high coating strength and is less prone to breakage. Grounding adapter accessory. With standard and lightning protection functions.

  Days to Ship:	22 Day(s) or more

• 

  Power Strip, 3 Outlets, with Lightning Resistance Cord Included

  ELPA

  [Features]
  ELPA standard: AC125V 15A. Operating temperature range: -10°C to 40°C. Total: up to 1,500 W. For indoor use only. Number of outlets: 3. Color: black/white

  Days to Ship:	8 Day(s) or more

• 

  Power Strip, 4 Outlets, with Lightning Resistance Cord Included

  ELPA

  [Features]
  ELPA standard: AC125V 15A. Operating temperature range: -10°C to 40°C. Total: up to 1,500 W. For indoor use only. Number of outlets: 4. Color: black/white

  Days to Ship:	8 Day(s) or more

• 

  Power Strip, Lightning-Resistant Swing Adapter

  ELPA

  [Features]
  ELPA up to 1,500 W. Protects equipment from lightning surges. The swinging action keeps the area around the outlet tidy. Color: black/white

  Days to Ship:	12 Day(s) or more

• 

  Power Strip, 7 Sockets, Interlocking Switch, Constantly Energized, with Lightning Surge Protection

  ELECOM

  Optimal for office use. A power strip for connecting to 3-pin plug OA equipment, such as projectors and monitors, etc., without using an adapter.
  *Master switch model
  
  [Features]
  · Lightning surge protected power strip with a built-in, high-performance, lightning surge-absorbing element.
  · Lightning surge protected power strip with a built-in, high-performance, lightning surge-absorbing element for protecting electrical equipment against lightning surges.
  · The power strip has a built-in high-performance lightning surge-absorbing element (varistor) with a maximum surge voltage of 12,500 V(*). Therefore, this product is effective at preventing damage caused by lightning to electronic devices, such as PCs and audiovisual equipment, etc.
  *The value for the maximum surge voltage of 12,500 V is based on JEC 210/212 standards.
  · A useful model with a 2-pin plug specification and 7 sockets.
  · Four of seven sockets can be switched ON/OFF by a master switch. The remaining three sockets remain constantly energized. Therefore, the sockets can be adapted to the equipment used.
  · Utilizes a double covered cable that conforms to the standards of the Japan Electrical Wiring System Industries Association.
  · Utilizes a power cable conforming to the standard (JWDS0010) of the Japan Electrical Wiring System Industries Association for effective prevention against electric shock/fire caused by damage cable covers and broken wires.
  · An environmentally friendly product for suppressing the impact on people and the environment when it is disposed of. This product is recommended for companies engaged in environmental initiatives and individuals who are keenly interested in environmental issues.

  Days to Ship:	8 Day(s) or more

• 

  General-Purpose Power Strip, 6 Retaining Sockets

  AMERICAN DENKI

  A retaining type power strip with 6 sockets rated at 15 A, 125 V
  [Features]
  · OA power strip series with standard magnets.
  · Equipped with a lightning surge absorbing element (varistor) (A8001LS only).

  Days to Ship:	12 Day(s) or more

• 

  General-Purpose Power Strip, 8 Sockets, Retaining

  AMERICAN DENKI

  A retaining type power strip with 8 sockets rated at 15 A, 125 V
  [Features]
  · Power strip series with standard magnets.
  · Equipped with a lightning surge absorbing element (varistor) (A8009LS only).

  Days to Ship:	12 Day(s) or more

• 

  Lightning Guard Power Strip With Individual Switch

  ELECOM

  Lightning surge protected power strip with a built-in, high-performance, lightning surge-absorbing element for protecting electrical equipment against lightning surges.
  [Features]
  ・ It has a built-in high-performance lightning surge absorber (varistor) with a maximum surge voltage of 12,500 V, which is effective in preventing damage to electronic devices such as personal computers and AV equipment due to lightning (Maximum surge voltage 12,500 V is a value based on JEC210 / 212 standard)
  ・ It has an individual switch that can be turned ON/OFF for each connected device and can save standby power individually
  ・ Individual switches are diagonally arranged so as not to get in a way even when an AC adapter or a large plug is connected
  ・ UF resin, which has excellent heat resistance, is used for the outlet, so it does not easily melt even in the unlikely event of heat generation, and is effective in preventing electric fires
  ・ One outlet is separated so that it does not interfere with the adjacent outlet even if an AC adapter is connected
  ・ An insulating cap is attached to the base of the blade of the plug, which helps prevent fires due to the undesired arcing
  ・ The power cord uses a double-covered cord that compliant with the Japan Wiring System Industry Association standard (JWDS0010), so it is effective in preventing electric shock and fire due to disconnection or tearing of the wire
  ・ Uses a 180° swivel plug that is easy to wire even in tight spaces
  ・ The plug specification is a 2-prong type and a convenient 4 or 6 outlets type

  Days to Ship:	12 Day(s) or more

• 

  Retaining Magnet Lightning Power Strip

  ELECOM

  Power strip with plenty of outlets that can connect 7 units.
  [Features]
  ·Firm removal prevention: The plug is locked firmly so you don't have to worry about it coming off
  ·Swivel Plug: Since it is a 180° movable plug, it can be used even in narrow places
  ·Heavy-duty magnets: It can be temporarily fixed to a steel desk, etc., with a heavy-duty magnet. Please be careful not to drop, etc.
  ·Glowing switch: You can turn on and off collectively and avoid forgetting to turn it off inadvertently
  ·Uses a safe double-shielded cable
  ·Lightning surge absorption effects: 12,500 V (maximum surge voltage) to 240 V (Limited voltage) (If you receive a direct lightning strike, you cannot protect it.)

  Days to Ship:	12 Day(s) or more

• 

  Lightning Protection Power Strip With Dust Prevention Shutter

  ELECOM

  This product is a lightning protection power strip with a built-in, high-performance, lightning surge-absorbing element for protecting electrical equipment against lightning surges.
  [Features]
  ・ This product has a built-in high-performance lightning surge absorber (varistor) with a maximum surge voltage of 12,500 V, which is effective in preventing damage to electronic equipment such as personal computers and AV equipment due to lightning.
  (Maximum surge voltage 12,500 V is based on JEC210/212 standard. )
  ・ It has individual switches that can be turned ON/OFF for each connected device and individually save standby power.
  ・ For the individual switches, diagonal arrangement have been adopted so that the plugs do not interfere with them even when connecting AC adapters or relatively large plugs.
  ・ This product is equipped with dust guards for preventing the intrusion of dust into the outlets when not in use.This product helps to prevent fires due to tracking phenomena and electric shocks and fires caused by mischief of children.
  ・ The heat-resistant UF resin is used for the outlet, and it is difficult to melt even if heat is generated, and it is effective in preventing electric fire.
  ・ Even if the AC adapter is connected, 1 outlet is placed separately so that it will not easily interfere with the adjacent one.
  ・ An insulation cap is attached to the root of the plug blades to help prevent fire due to tracking phenomenon.
  ・ As the power cord is a double covered cord that is compliant to the Japan Electrical Wiring System Industries Association Standard (JWDS0010), it is effective in preventing electric shock and fire due to wire breakage and tears.
  · Features a 180° swing plug that is easy to use for wiring even in narrow places.

  Days to Ship:	12 Day(s) or more

• 

  Lightning Guard Power Strip With Non-Lighting Individual Switch

  ELECOM

  It is a lightning guard power strip with individual switches that uses switches that do not glow even when turned on and can further save power consumption.
  [Features]
  · It features built-in high performance lightning surge-absorbing elements which protect electrical equipment from lightning surges.
  · Since it has a built-in high-performance lightning surge absorber (varistor) with a maximum surge voltage of 12,500 V, it is effective in preventing damage to electronic devices such as personal computers and AV devices due to lightning.
  (Maximum surge voltage of 12,500 V is a value based on JEC210/212 standard.)
  · It has individual switches that can be turned ON/OFF for each connected device and individually save standby power.
  · For the individual switches, it features diagonally arranged switches that are not easily interfered with even if an AC adapter or a large plug is connected.
  · The heat-resistant UF resin is used for the outlet, and it is difficult to melt even if heat is generated, and it is effective in preventing electric fire.
  · 1 outlet is placed separately so that even if the AC adapter is connected, it will not easily interfere with the adjacent one.
  · An insulation cap is attached to the root of the plug blade to help prevent fire caused by undesired arcing.
  · The power cord uses a double-jacketed coating that compliant with the Japan Electrical Wiring System Industries Association standard (JWDS0010), so it is effective in preventing electric shock and fire due to wire break or tearing of the coating.
  · It uses a 180° swivel plug that is easy to wire even in a narrow space.
  (Compared to the glowing switch with a built-in neon ball, it is possible to save 0.1 W per switch.)

  Days to Ship:	12 Day(s) or more

• 

  Lightning Protection Power Strip With Individual Switch T-04-26 / BR Series

  ELECOM

  It is a lightning protection power strip "color style" with an individual switch in brown color that can be coordinated with the color of the flooring.
  [Features] · It has built-in high-performance lightning surge absorbing element that protects electronic devices from lightning surges
  · Since it has a built-in high-performance lightning surge absorber (varistor) with a maximum surge voltage of 12,500 V, it is effective in preventing damage to electronic devices such as personal computers and AV devices due to lightning
  · There is an individual switch that can turn on and off the power supply of connected devices individually and save standby power
  · It features a diagonally arranged switch that is not easily interfered with even if an AC adapter or a large plug is connected
  · UF resin, which has excellent heat resistance, is used for the outlet, so it does not easily melt even in the unlikely event of heat generation, and is effective in preventing electric fires
  · One outlet is separated so that it does not interfere with the adjacent outlet even if an AC adapter is connected
  · An insulating cap is attached to the base of the blade of the plug, which helps prevent fires due to the undesired arcing
  · The power cord uses a double-jacketed coating that compliant with the Japan Electrical Wiring System Industries Association standard (JWDS0010), so it is effective in preventing electric shock and fire due to wire break or tearing of the coating
  · Uses a 180° swivel plug that is easy to wire even in tight spaces

  Days to Ship:	12 Day(s) or more

Loading...