Terminal Blocks (Options, Others)

• 

  Insulation Cap (Multiple Connection Model)

  MISUMI

  Terminal box for insulating the portion of wire connections

  • 600 V

  Days to Ship:	16 Day(s) or more

• 

  Nameplate Fixing Piece (For BN, BNH Terminal Block)

  MISUMI

  It is used for fixing when using a name plate on a BN type or BNH type DIN rail terminal block.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Busbar, SSCH Series

  WEIDMULLER

  Busbar
  
  [Features]
  · A clamp for fixing busbars / grounding bars and electrical wires for integrating neutral wires (N) and grounding wires (PE) on switch gears and control circuits.
  · Also enables easy processing of shield wiring as an EMC measure.
  · Ideal for connecting any number of neutral wires or grounding wires in restricted spaces.
  · For the SSch, wiring is connected with ZB.
  · The ZB can be moved left and right along bars, allowing wires to be connected in any position.
  · The NSch and ESch feature square holes and tap holes at regularly spaced intervals, and wires can be clamped down onto the bar from above with the DS.
  · When doing so, inserting the protruding part of the DS into the square hole increases the support strength for the wires.
  · Although it depends on the size of the wire, up to 70 wires can be connected per 1 m.

  Days to Ship:	8 Day(s) or more

• 

  Wire-Type Jumper for Rail Mount Terminal Block

  WAGO

  Wire jumpers are ideal for when wanting to employ jumper connections between terminals which are separated from the terminal block assembly.
  When installing machinery or control systems, it is often the case that
  wiring must be added between terminal blocks on rails that are not mutually adjacent.

  Days to Ship:	16 Day(s) or more

• 

  Single-Row Compact Jumper Strip

  MISUMI

  A jumper metal fitting that is used for compact terminal blocks with a terminal pitch of 7.62 mm, and that can be short-circuited with a dedicated crossover bar.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Branching Terminal Block for Low Voltage Applications

  SHINOHARA ELECTRIC

  Suitable for low pressure branching with up to eight branches.
  
  [Features]
  · A low pressure branching terminal block which can connect with up to eight branches (for 200A).
  · The withstand voltage is 14kV and the distance along the wire is 20 mm or more.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  High Pressure Relaying Terminal Block

  SHINOHARA ELECTRIC

  Use as a relay terminal block for high voltage cables
  
  [Features]
  · The mounting bar is stood vertically for easy terminal mounting.
  · Energized parts are covered with a transparent cover, enabling connections to be easily seen.
  · The insulation cover ensures safety, even if accidentally touched by hand.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Stud Terminal Block【50-100 Pieces Per Package】

  SHINOHARA ELECTRIC

  Use as a support block for relying or branching wires.
  
  [Features]
  · Three screw diameters of M6, M8, and M10 are available without any changes in the dimensions of the main body.
  · Has excellent insulating properties, is lightweight, and won't crack.
  · A green main body type is also available.
  · To place an order, add an M to the end of the model number.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Back Wiring Type Terminal Block for Grounding

  SHINOHARA ELECTRIC

  Use for measuring grounding resistance for electrical equipment and electrical circuits. An underside wiring type.
  
  [Features]
  · Makes wiring easy when using with underside wired equipment.
  · Release the movable bar to easily measure the resistance in the grounding pin side.
  · By shorting each of the T1, T2, T3 pins, resistance in the grounding pin side can be easily measured.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Stud Terminal Block (Fixed Type), TS-R Series

  PATLITE (KASUGA)

  Small and lightweight. Can be connected in any direction and with only limited mounting space. Ideal for relay terminals, test terminals, and busbar support blocks, etc.
  
  [Features]
  · Ideal for large current circuit relay terminals, test terminals, and busbar (copper band) support blocks, etc.
  · The base part is a phenol resin (UL94HB equivalent) molding, and therefore extremely tough.
  · Up to four crimp terminals can be mounted.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  ML-1000-B1

  SATOPARTS

  [Features]
  · Screws for mounting L-shaped covers to the ML-5000, ML-5100, and ML-5200.

  Days to Ship:	16 Day(s) or more

• 

  Group Marker Carrier for Mounting of an End Stop

  WAGO

  [Features]
  · A group marker carrier for end stop mounting.

  Days to Ship:	16 Day(s) or more

• 

  Driver for Wire Connection of Terminal Blocks/with Insulation Shaft

  WAGO

  [Features]
  · For operating connectors and terminal blocks with CAGE CLAMP®.
  · Shaft with insulating properties.
  · Made in Europe.
  · A normal length non-slip grip. Ideal for general work.

  Days to Ship:	16 Day(s) or more

• 

  Connector Relay Box with Waterproof Cover

  OMRON

  A waterproof cover that can be used for connector junction boxes for outside control panels that consolidate the wiring for sensor I/O connectors and reduce labor-hours and increase environmental durability.

  Days to Ship:	16 Day(s) or more

• 

  Terminal Block for Relaying - Comb Type Jumper - for 862 Series

  WAGO

  Each series includes a jumper for relay terminal blocks. Select the most appropriate type to match the intended application, including the number of poles.

  Days to Ship:	16 Day(s) or more

• 

  PCB Carrier for DIN Rail Mounting, 288 Series

  WAGO

  Use the 288 series for easy mounting of printed circuit boards on to DIN rails. Available in a variety of sizes.

  Days to Ship:	16 Day(s) or more

• 

  Maintenance Parts【10 Pieces Per Package】

  MISUMI

  Maintenance parts to not lose parts during installation

  Days to Ship:	16 Day(s) or more

• 

  Single-Row Compact Insulating Protective Cover Bracket【2 Pieces Per Package】

  MISUMI

  Used for compact terminal blocks with a terminal pitch of 7.62 mm to attach insulated protective covers.

  Days to Ship:	16 Day(s) or more

• 

  Fuse Sold Separately For TXF Fuse Terminal Blocks

  PATLITE (KASUGA)

  The separately sold fuse for TXF fuse terminal blocks.
  
  [Features]
  · For rail type terminal blocks with fuse carriers.

  Days to Ship:	16 Day(s) or more

• 

  Assembly Terminal, Terminal Block for &, Connection Band

  PATLITE (KASUGA)

  A connection band for branching terminal blocks. Ideal for connecting with breakers.
  
  [Features]
  · A connection band for TQB60D, TQB100D, and TQB200D branching terminal blocks, and TQB100 relay terminal blocks.
  · A heat shrink tube has been implemented over the live parts for safer use.

  Days to Ship:	10 Day(s) or more

• 

  Terminal Block Insulation Barrier【2 Pieces Per Package】

  PATLITE (KASUGA)

  Insulation barrier for large capacity terminal block (TQB400D).
  [Features]
  ・ Convenient to prevent short circuit between crimp terminals (between poles) during wiring
  [Applications]
  ・ Ideal for insulation between terminals of TQB400D

  Days to Ship:	16 Day(s) or more

• 

  TX and TXU Series Unit Removal Tool

  PATLITE (KASUGA)

  A removal tool for the TX and TXU series. Can be used to add and remove terminal blocks mounted on IEC rails in any position.
  
  [Features]
  · A tool for removing units mounted to IEC rails (TXDA2 and TNDS2).
  · Can be used with TX7 to TX20 and TXU7 to TXU20.

  Days to Ship:	16 Day(s) or more

• 

  Disconnection Terminal Block, DT Series, Knob Linkage Pin (Assembled Goods)【100 Pieces Per Package】

  TOYOGIKEN

  An accessory for when using fully assembled DT series disconnection terminal blocks.

  Days to Ship:	13 Day(s) or more

• 

  Stud Type Terminal Block, ST Series【1-10 Pieces Per Package】

  TOYOGIKEN

  [Features]
  · A stud type terminal block. Ideal for use as a relay, branching, or support type block for electrical wires and copper busbars, etc.
  · Regardless of the electrical situation, it can, among many other uses, be used as a support material for maintaining height.

  Days to Ship:	13 Day(s) or more

• 

  Shaft【10 Pieces Per Package】

  TOYOGIKEN

  A shaft for use when using terminal blocks as a fully assembled direct mounting assembly terminals.

  Days to Ship:	16 Day(s) or more

• 

  Ground Stud Terminal Block (Fixed Type), TS-CHM Series

  PATLITE (KASUGA)

  Ideal as a terminal block for grounding power distribution boards and control panels. The shorting panel can be removed, allowing for easy megger testing.
  
  [Features]
  · The shorting panel can be removed, allowing for easy megger testing.
  · The base part is a phenol resin (HB equivalent flame-retardant grade) molding, and therefore extremely tough.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Test Plug PS, ZS, FK, FZS Series

  WEIDMULLER

  This is a check pin for a large current PCB terminal block, which supports 150 A/1,000 V and can be used to connect cables of up to 50 mm^2 to a PCB.

  Days to Ship:	8 Day(s) or more

• 

  Ultra Small Terminal Block RT Series - Accessories【200 Pieces Per Package】

  TOYOGIKEN

  The RT series is an ultra small terminal block series; available in a number of variations. Despite its small size, it includes a wide and easy to see name plate with a width of 10 mm.

  Days to Ship:	16 Day(s) or more

• 

  DIN Rail Mounting Bracket for Terminal Blocks【10 Pieces Per Package】

  IDEC

  This product is a fitting to mount a terminal block, which can be assembled without an end plate when placing terminal blocks with different current capacities or terminal screws adjacent to each other, to a rail.

  Days to Ship:	Same day or more

• 

  Removal Tool for Terminal Blocks

  IDEC

  [Features]
  · A convenient removal tool used for removing terminal blocks from DIN rails.

  Days to Ship:	16 Day(s) or more

• 

  3-Wire IDC Connector, PRS Series【10 Pieces Per Package】

  TOYOGIKEN

  Three-wire pressure welding type connector for PRS series. PRST3 is a dedicated relay adapter.
  
  [Features]
  · A dedicated relay adapter for three-wire pressure welding type connectors (PRS-3CN series).
  · Ideal for relaying wires between sensors and terminals.
  · The adapter can be used with multi-pole connections such as with a block terminal block (PAT, P).

  Days to Ship:	16 Day(s) or more

• 

  NTB Series Compatible Accessory

  TOYOGIKEN

  A compatible accessory for use when using the NTB series neutral-electrode switch terminal blocks as a fully assembled product.

  Days to Ship:	21 Day(s) or more

• 

  Direct Mounting Type Fitting for Terminal Blocks【10 Pieces Per Package】

  IDEC

  This product is a terminal block, which can be assembled without an end plate when placing terminal blocks with different current capacities or terminal screws adjacent to each other, and is a metal fitting for mounting a two-level terminal block.

  Days to Ship:	16 Day(s) or more

• 

  Connection Nut for Terminal Block【100 Pieces Per Package】

  IDEC

  This product is a terminal block, which can be assembled without an end plate when placing terminal blocks with different current capacities or terminal screws adjacent to each other, and is a nut for connecting 2-level terminal blocks.

  Days to Ship:	16 Day(s) or more

• 

  BA Series Terminal Block Direct Mounting Type Fitting【10 Pieces Per Package】

  IDEC

  Metal fittings for mounting a quick-mount terminal block that can be mounted at any position on the rail with single-action, directly to a panel.

  Days to Ship:	9 Day(s) or more

• 

  BA Series Terminal Block Connection Nut【50 Pieces Per Package】

  IDEC

  A nut for mounting a quick-mount terminal block that can be mounted at any position on the rail with single-action, to a panel.

  Days to Ship:	9 Day(s) or more

• 

  Rail for Terminal Block【10 Pieces Per Package】

  IDEC

  This product is a rail for attaching terminal blocks that can be assembled without an end plate when placing terminal blocks with different current capacities or terminal screws adjacent to each other.

  Days to Ship:	13 Day(s) or more

• 

  L Type Fitting Accessory for PCB Terminal Blocks【20 Pieces Per Package】

  IDEC

  Metal fittings for connecting a mounting piece or terminal block to a PCB, which is necessary when using L-shaped terminals.

  Days to Ship:	16 Day(s) or more

• 

  Spacer Accessory for PCB Terminal Blocks【20 Pieces Per Package】

  IDEC

  This spacer is used to float a PCB with straight terminals.

  Days to Ship:	16 Day(s) or more

• 

  ML-1000-WB3-S

  SATOPARTS

  [Features]
  A screw set for mounting terminal blocks and covers.
  · Compatible with the ML-1765/2015/3161/3391/3921.

  Days to Ship:	16 Day(s) or more

• 

  ML-40-3I1

  SATOPARTS

  [Features]
  ・ ML-40, ML-41 series cover mounting bracket, ML-40-3I1

  Days to Ship:	16 Day(s) or more

• 

  ML-40-3J

  SATOPARTS

  [Features]
  ・ ML-40, ML-41 series cover mounting screw, ML-40-3J

  Days to Ship:	16 Day(s) or more

• 

  ML-40-3L1

  SATOPARTS

  [Features]
  · ML-40-3L1 main body horizontal mounting brackets for the ML-40 and ML-41 series.

  Days to Ship:	16 Day(s) or more

• 

  ML-50-4G1

  SATOPARTS

  [Features]
  · An ML-50-4G1 relay soldering bracket for the ML-50 series.

  Days to Ship:	16 Day(s) or more

• 

  ML-50-4I1

  SATOPARTS

  [Features]
  ・ ML-50-4I1 cover mounting bracket for ML-50 and ML-51 series

  Days to Ship:	16 Day(s) or more

Loading...