Cable Bushings

• 

  Cable Bushing (Grommet / Rubber with Membrane Model)【1-5 Pieces Per Package】

  MISUMI

  [Specifications]·It is a grommet that has a dust-proof effect in addition to the disconnection prevention effect that a normal grommet has. ·Make a notch in the membrane (ød) and use it by passing through cable.

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Hole plugs HPL Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Hole Plugs (HPL)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Cable Bushing (Open Model)【100 Pieces Per Package】

  MISUMI

  [Specifications]·Single-action mount snap bushing · It can be mounted and fixed with a single-action in the round hole of a panel with a thickness of 0.8 mm to 3.2 mm. (no tools required)

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	16 Day(s) or more

• 

  [AMERICAN DENKI]Cable Bushing (Open Type Screw Tightening Edge Guard)【1-10 Pieces Per Package】

  MISUMI

  Screw tightening-model wire protection bushing. (It is not a mechanism for holding the wire, but rather is a mechanism which the wire passes through.)

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	Same day or more

• 

  NG Series Grommet【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・Grommet (NG)

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Locknut for Cable Gland【10 Pieces Per Package】

  MISUMI

  [Specifications]·A panel-mount lock nut for cable gland · Quantity per pack (P): 10

  • Volume Discount

  Days to Ship:	Same day or more

• 

  Cable Gland Panel Rubber Gasket for Mounting【10 Pieces Per Package】

  MISUMI

  [Specifications]·Panel-mount packing for the ST/BS series gland.

  • Volume Discount

  Days to Ship:	Same day

• 

  Cable Bushing (Blind / Black)【100 Pieces Per Package】

  MISUMI

  [Specifications]·A single-action mount black blind cap · Material (main body part): Nylon 66 (UL94V-2)

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	Same day or more

• 

  PMF type protective vent

  TAKACHI ELECTRONICS ENCLOSURE

  PMF Type Protective Vent
  
  [Features]
  The protective vent can adjust for the pressure changes within the enclosure, where hot and cold differences in temperature are generated. It does so via a membrane filter that allows ventilation, but not water or dust.
  In addition, there are measures to discharge water vapor to prevent condensation within the enclosure.
  There are specifications for IP68 (water depth 2M/1hr.) waterproof and dustproof performance, for flame resistance in the range from -40°C to 125°C, and for harsh environments such as outdoor workplaces.
  Added high air flow PMF-12HA.
  For outdoor installation, mounting on a side surface is recommended.
  This product is for use only in the electronics industry.
  Not to be used for production facilities dealing with foodstuffs, cosmetics, drugs, or medical devices.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  JKG Model Nylon with Free Bushing【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  A replacement product for the discontinued JB Series.
  
  [Features]
  · Protects wires by mounting to the cross-sectional surface of machine-drilled holes.
  · Use by cutting and applying to cross-sectional surface of the machine-drilled holes.

  Days to Ship:	Same day

• 

  Bushing BN Nozzle【1-10 Pieces Per Package】

  AMERICAN DENKI

  [Features]
  ・ Nylon resin with superior heat resistance, impact resistance and abrasion resistance.
  ・ Can be used in a wide range of applications such as boards and concrete walls, peripheral equipment of machinery and office equipment.
  ・ Both the inner ends are chamfered to ensure that the thing passing through the nozzle is less likely to be scratched.

  • Volume Discount

  Days to Ship:	9 Day(s) or more

• 

  SOB-260-10 Open Bushing for Mounting Hole Diameter 25.0 to 26.0 mm【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  A dedicated cable bushing with a hole diameter of 25.0 to 26.0 mm that can be fixed and protected by a single-action after the cable is provided through the hole in the panel board.
  [Features]
  ・ Easily removable just by pushing the mounting snap part inward.
  ・ It is made of polyamide resin (nylon 66) for excellent electrical insulation and abrasion resistance.
  ・ It can be used within the operating temperature range of -40 to +85 degrees after installation.
  [Applications]
  ・ Ideal for fixing and protecting cable bundles in holes in a panel board.
  ・ Can be used indoors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Cable Bush (Cord Stopper)【100 Pieces Per Package】

  MISUMI

  Low-price cord stopper to attached the power cord to the panel and protect the cord

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	8 Day(s) or more

• 

  Multiple Model Cable Gland - Rubber Bush

  MISUMI

  [Specifications]·Rubber bushing for multiple cable glands · It has a slit structure that makes it easy to attach to the cable later.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Grommet with filmSG series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Grommet with film. (SG)

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Cable Bushing (Open Model / Slitting )【100 Pieces Per Package】

  MISUMI

  [Specifications]·Bushing is possible after passing the cable through the panel hole. ·Can be mounted and fixed with a single-action in the round holes of panels with a thickness of 0.8 mm to 3.2 mm. (no tools required)

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	16 Day(s) or more

• 

  Cable Bushing (Blind Gray / Ivory)【100 Pieces Per Package】

  MISUMI

  [Specifications]·Ivory and gray blind cap · Can be attached with a single-action without tools.

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	16 Day(s) or more

• 

  Small hole plugs MHD series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Small Hole Plugs (MHD)
  
  [Features]
  · Small hole plug with 4 sizes of hole diameters: φ5, φ5.5, φ7, and φ8.
  · Material properties include elasticity using TPE (an elastomer) and silicon rubber.
  · Supported installation plate thickness is 1.0 mm to 3.0 mm.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Edge protection: edge protectors with adhesive【1-50 Pieces Per Package】

  HELLERMANNTYTON

  [Features]
  ・ Since it has an adhesive, it can be attached securely, quickly and snugly to the panel cut part, contributing to the improvement of construction quality
  ・ With a transparent adhesive, the finish is beautiful
  ・ Two types, a 20 m reel type that can be cut to any length and a 250 mm cut bag type that is convenient when the usage quantity is small, are available
  ・ The reel-type small box is a functional storage box with dimensional scales that serve as a guide when cutting

  Days to Ship:	16 Day(s) or more

• 

  Flexible Bushing With Adhesive【1-25 Pieces Per Package】

  PANDUIT

  Flexible bushing with adhesive featuring outstanding workability.
  [Features]
  · Ideal for protecting wires that pass through panels, chassis, etc.
  · Insertion type with outstanding flexibility, making it easy to attach.
  · Can also be fastened using adhesive.
  · Two types of shapes are available: with or without slots on the side.
  · Reel type and an economical small volume pack are available. (Only slotted shape is available for the small volume pack.)

  CAD ：

  2D

  Days to Ship:	1 Day(s) or more

• 

  RB type rubber bushing【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · TMC series specific rubber bushing.
  · Use for case cable outer diameters of φ8 to φ9 mm.

  Days to Ship:	Same day

• 

  Rubber bushings for use with THB387 and THB391.【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Rubber bushings for use with THB387 and THB391 series products.
  · Use for working with thin diameter cables or removing multiple wires.
  · When used with wires of less than φ7.0 mm, 6000347LA can prevent rubber bushings from protruding
  and ensure stable waterproof properties. Use as required.

  Days to Ship:	Same day

• 

  Free Bushing【100 Pieces Per Package】

  HELLERMANNTYTON

  [Features]
  · Convenient for protection of wiring that passes over the cross section of the panel, etc.
  · Resistant to vibrations and shocks, has excellent wear resistance, possesses excellent protection performance for electric wires and more.
  · It can be installed simply by snapping it into the edge of the opening.
  · When it is used for an opening with a large outer circumference, more can be added for use.
  · It is made of 6-nylon, providing flexibility and corresponding to holes of any shape.
  [Applications]
  · For home appliances (washing machine, refrigerator, other devices), OA devices, entertainment devices, semiconductor manufacturing devices, electronic distribution board equipment, construction machinery, heavy-duty vehicles, as well as electronic machine parts.

  Days to Ship:	16 Day(s) or more

• 

  Nylon Cord Bushing

  AMERICAN DENKI

  Days to Ship:	12 Day(s)

• 

  Cable Bush (Hidden / M Screw)【1-100 Pieces Per Package】

  MISUMI

  [Specifications]·A blind cap that closes the cable clamp hole, etc., in the box.

  • Volume Discount

  • Flame-Retardant

  Days to Ship:	16 Day(s) or more

• 

  U-Shaped Bushing (Standard Model)【5 Pieces Per Package】

  MISUMI

  [Specifications]·A protective bushing attached to the edge of a square hole, etc. ·Made of nylon 6, it is highly flexible and suitable for use on the edges of panels and chassis.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  U-Shaped Bushing (Flexible Model)

  MISUMI

  [Specifications]·Flexible bushing for protecting openings. ·Made of polyethylene, it is highly flexible and can be used for curved and circular parts.

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  BCAS・BCAL dedicated blind plug BCM series

  TAKACHI ELECTRONICS ENCLOSURE

  BCAS/BCAL Dedicated Blind Plug (BCM)
  
  [Features]
  An optional part for use with latch hinges.
  · Cannot be mounted if a cover screw is used on the box.

  Days to Ship:	Same day

• 

  Universal Bushing (With Grooves / Standard Size Type)【25-100 Pieces Per Package】

  PANDUIT

  Fitting type flexible bushing that can be attached easily.
  [Features]
  · Insertion type with outstanding flexibility, making it easy to attach.
  · Can also be fastened using adhesive.
  · Ideal for protecting cables that pass through panels, chassis, etc.
  · Flame-retardant type is also available.
  · Because it is long, it can be cut to the required length without waste.

  Days to Ship:	12 Day(s) or more

• 

  Rubber Bushings for Use with THB390, 400, 401L, 402T, 399Y, and THA209【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Rubber bushing for use with THB series and THA209 series (cannot be used with THB387 or THB391 series). Use for working with thin diameter cables or removing multiple wires.
  · When used with wires of less than φ7.0 mm, 6000087LF can prevent rubber bushings from protruding and stabilize waterproof properties. Use as required.
  · Not for use with THB400-0-17 series.

  Days to Ship:	Same day

• 

  Open Bushing for 12.6 to 13.0 mm Diameter Mounting Hole【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  A dedicated cable bushing with a hole diameter of 12.6 to 13.0 mm that can be fixed and protected by a single-action after the cable is provided through the hole in the panel board.
  [Features]
  ・ Easily removable just by pushing the mounting snap part inward.
  ・ It is made of polyamide resin (nylon 66) for excellent electrical insulation and abrasion resistance.
  ・ It can be used within the operating temperature range of -40 to +85°C after installation.
  [Applications]
  ・ Ideal for fixing and protecting cable bundles in holes in a panel board.
  ・ Can be used indoors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  SOB-130-50 Open Bushing for Mounting Hole Diameter 12.6 to 13.0 mm【50 Pieces Per Package】

  TRUSCO NAKAYAMA

  A dedicated cable bushing with a hole diameter of 12.6 to 13.0 mm that can be fixed and protected by a single-action after the cable is provided through the hole in the panel board.
  [Features]
  ・ Easily removable just by pushing the mounting snap part inward.
  ・ It is made of polyamide resin (nylon 66) for excellent electrical insulation and abrasion resistance.
  ・ It can be used within the operating temperature range of -40 to +85 degrees after installation.
  [Applications]
  ・ Ideal for fixing and protecting cable bundles in holes in a panel board.
  ・ Can be used indoors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  SOB-190-10 Open Bushing for Mounting Hole Diameter 17.6 to 19.0 mm【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  A dedicated cable bushing with a hole diameter of 17.6 to 19.0 mm that can be fixed and protected by a single-action after the cable is provided through the hole in the panel board.
  [Features]
  ・ It can be easily removed by simply pushing the mounting snap inward.
  ・ It is made of polyamide resin (nylon 66) for excellent electrical insulation and abrasion resistance.
  ・ It can be used within the operating temperature range of -40 to 85 degrees after installation.
  [Applications]
  ・ Ideal for fixing and protecting cable bundles in holes in a panel board.
  ・ Can be used indoors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  SOB-190-50 Open Bushing for Mounting Hole Diameter 17.6 to 19.0 mm【50 Pieces Per Package】

  TRUSCO NAKAYAMA

  A dedicated cable bushing with a hole diameter of 17.6 to 19.0 mm that can be fixed and protected by a single-action after the cable is provided through the hole in the panel board.
  [Features]
  ・ Easily removable just by pushing the mounting snap part inward.
  ・ It is made of polyamide resin (nylon 66) for excellent electrical insulation and abrasion resistance.
  ・ It can be used within the operating temperature range of -40 to +85°C after installation.
  [Applications]
  ・ Ideal for fixing and protecting cable bundles in holes in a panel board.
  ・ Can be used indoors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  SOB-260-50 Open Bushing for Mounting Hole Diameter 25.0 to 26.0 mm【50 Pieces Per Package】

  TRUSCO NAKAYAMA

  A dedicated cable bushing with a hole diameter of 25.0 to 26.0 mm that can be fixed and protected by a single-action after the cable is provided through the hole in the panel board.
  [Features]
  ・ Easily removable just by pushing the mounting snap part inward.
  ・ It is made of polyamide resin (nylon 66) for excellent electrical insulation and abrasion resistance.
  ・ It can be used within the operating temperature range of -40 to +85 degrees after installation.
  [Applications]
  ・ Ideal for fixing and protecting cable bundles in holes in a panel board.
  ・ Can be used indoors.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Grommet, for 1.6-mm Plate Thickness, Length 5 M (1 Pc.)

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 1.6-mm thick with a slit to be usable with various hole shapes.
  [Features]
  ・ Optimal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and it can be fixed using an adhesive or cut to the required size.
  ・ It is made of nylon, excellent in abrasion resistance and electrical insulation, and can be cut to any length for economical use.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	12 Day(s)

• 

  Grommet, for 2.4-mm Plate Thickness, Length 5 M (1 Pc.)

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 2.4-mm thick with a slit to be usable with various hole shapes.
  [Features]
  ・ Optimal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and it can be fixed using an adhesive or cut to the required size.
  ・ It is made of nylon, excellent in abrasion resistance and electrical insulation, and can be cut to any length for economical use.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	12 Day(s)

• 

  Grommet, for 3.2-mm Plate Thickness, Length 5 M (1 Pc.)

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 3.2-mm thick with a slit to be usable with various hole shapes.
  [Features]
  ・ Optimal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and it can be fixed using an adhesive or cut to the required size.
  ・ It is made of nylon, excellent in abrasion resistance and electrical insulation, and can be cut to any length for economical use.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	12 Day(s)

• 

  U-Shaped, Etching, for 1.2-mm Plate Thickness, Length 1 M, TEG-012-10【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 1.2-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 10 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	30 Day(s)

• 

  U-Shaped, Etching, for 1.2-mm Plate Thickness, Length 1 M, TEG-012-50【50 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 1.2-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 50 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	30 Day(s)

• 

  U-Shaped, Etching, for 1.6-mm Plate Thickness, Length 1 M, TEG-016-10【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 1.6-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 10 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	30 Day(s)

• 

  U-Shaped, Etching, for 1.6-mm Plate Thickness, Length 1 M, TEG-016-50【50 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 1.6-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 50 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	Quote

• 

  U-Shaped, Etching, for 2.4-mm Plate Thickness, Length 1 m, for Indoor-Use【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 2.4-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 10 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	30 Day(s)

• 

  U-Shaped, Etching, for 2.4-mm Plate Thickness, Length 1 M, TEG-024-50【50 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 2.4-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 50 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	30 Day(s)

• 

  U-Shaped, Etching, for 3.2-mm Plate Thickness, Length 1 m, for Indoor-Use【10 Pieces Per Package】

  TRUSCO NAKAYAMA

  Cable bushing dedicated for 3.2-mm thick, made of nylon with excellent abrasion resistance and electrical insulation.
  [Features]
  ・ 1 m long type ideal for protecting cables, etc., from square holes and straight cut parts in panels.
  ・ Employing fitting method to be easily mountable, and can be fixed using an adhesive or cut to the required length.
  ・ Suitable for protecting cables, etc., at the edges of panels and chassis.
  ・ Economical because it comes with 10 pcs. and can be cut into arbitrary lengths.
  [Applications]
  ・ Ideal for protecting edges of cables, panels, and chassis.
  ・ Can be used indoors.

  Days to Ship:	30 Day(s)

Loading...