Incision-Resistant Gloves（Application：Cut resistance）

• 

  Cut-Resistant Gloves, 7 Gauge, Long-Sleeve Type MK-110

  MIDORI ANZEN

  Days to Ship:	16 Day(s) or more

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves "Cut Resist"

  TOWA CORPORATION

  [Features]
  ·Gloves made of high-strength polyethylene thread with excellent cut resistance and coated with soft polyurethane.
  ·Excellent low dust-producing performance.
  [Applications]
  ·Glass substrate handling, automotive industry, etc.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Glass Fiber Gloves

  KAWANISHI INDUSTRY

  High-grade cut-resistant gloves with level 5 cut resistance.
  [Features]
  ·Uses glass fiber and ultra-high-strength polyethylene thread.
  ·It has excellent strength such as tear resistance, cut resistance, and abrasion resistance.
  ·Since long-fiber yarn is used, there is little yarn dust generated from the gloves.
  ·The cuffs of the wrist are overlocked to prevent fraying.
  ·Glass fiber (glass fiber) and ultra-high strength polyethylene (Dyneema) are used.
  [Applications]
  ·For the metal processing industry and glass work.
  ·Can also be used as inner gloves.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves Hi-Flex CR (Anti-Slip)

  ANSELL

  Cut-resistant gloves with workability that use thin Kevlar fibers (15 gauge).
  [Features]
  · Uses Kevlar fibers for improved safety.
  · The feel of bare hands with a high degree of flexibility and excellent cut resistance.
  · The palms are coated with foamed nitrile rubber.
  · The textured surface of the foamed nitrile rubber provides grip performance that is excellent for handling oil.
  · Thin with excellent fit to enable work with the feel of bare hands.
  [Applications]
  · Perfect for handling sharp parts, thin steel and copper plates and plastic molded parts, etc.

  Days to Ship:	1 Day(s)

• 

  [Cut Resistant Gloves] Incision-Resistant Gloves, No. 544 ChemiStar Palm Fit FS

  SHOWA GLOVE

  Cut-resistant palm anti-slip gloves that are made from high-strength polyethylene yarn and can be used with the feeling of fingertips.
  [Features]
  ·Composite yarn of high-strength polyethylene yarn and synthetic fiber is used for the fiber part.
  ·The design has been devised to make use of the sense of the fingertips, making it easier to grasp small parts such as screws and screws.
  ・ Since the palm is coated with polyurethane foam, it demonstrates a high anti-slip effect and has excellent breathability
  ・ It can be used repeatedly by washing. Uses long fibers to suppress the generation of dust and lint from gloves
  ・ The hem is overlocked to prevent fraying. EN388 Cut Resistant Test: Level 3
  [Applications]
  ・ Ideal for steel and glass processing work where burrs, edges and blades may cause a cut accident
  ・ High fit makes it ideal for working with glass substrates and assembling machines

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves Hi-Flex (Anti-Slip)

  ANSELL

  Cut-resistant gloves that are lightweight, flexible, and comfortable.
  [Features]
  ·Gloves with the highest abrasion resistance and puncture resistance of the high-flex series.
  ·Dyneema fiber made from ultra-high molecular weight polyethylene is used.
  ·A blend of Dyneema, spandex, and nylon provides comfort and softness.
  [Applications]
  ·Ideal for handling sharp parts, oily metals, plastics, and ceramics.

  Days to Ship:	9 Day(s) or more

• 

  Incision-Resistant Gloves, Zylon Cut-Resistant Gloves (With Slip Prevention)

  TRUSCO NAKAYAMA

  [Features]
  · High-level incision resistance gives it outstanding durability.
  · Non-slip treatment has been applied to the entire palm.
  [Applications]
  · Glass, iron and steel, machinery, presses, etc.

  Days to Ship:	1 Day(s)

• 

  Cut-Resistant, Perfect Fit Club, Non-Coated

  KAWANISHI INDUSTRY

  Uses extra strong polyethylene thread for excellent resistance to cuts, abrasion, etc. Metalworking. Glassworking.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut Resistant Gloves PU (Level 3)

  TRUSCO NAKAYAMA

  Long type which covers wrist. Has anti-slip properties due to a polyurethane coating. Due to its long fibers, it creates far less dust, compared with aramid fiber. Has greater weather resistance when compared with aramid fiber. A thin glove which uses a weave of ultra-high-strength long polyethylene fiber, and has achieved a cut level of 3 in tests in conformance with EN388. Work where cutting injuries are a risk, such as glass, steel, machinery and pressing.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves, ChemiStar Palm NO540

  SHOWA GLOVE

  Non-slip gloves with cut-resistant palms that use super high strength polyethylene thread.
  [Features]
  · Gloves that use super high strength polyethylene thread for an excellent fit, low dust production and level 2 cut resistance strength.
  · The palms are coated with foamed polyurethane for a powerful non-slip effect and excellent breathability.
  · Uses long fibers to control the shedding of lint from the gloves. These gloves feature a unique 13-gauge seamless knit.
  · The cuffs use overlock processing to prevent fraying.
  · EN388 Cut Resistant Test: Level 2.
  [Applications]
  · For handling glass and metals in the machinery industry, precision machinery industry, glass and construction work, automotive work, etc.
  · Also for handling workpieces with burrs and edges.

  Days to Ship:	1 Day(s)

• 

  Cut-Resistant Gloves, Summitech RV9

  DUNLOP

  [Features]
  · The palms have a crinkle finish for excellent grip performance.
  · In EN388 testing, cut resistant level 3, abrasion resistant level 3, tear resistant level 4, pierce resistant level 4.
  · The palms have a crinkle finish for excellent grip performance.
  [Applications]
  · Handling glass.
  · Metal manufacturing.
  · Automotive production.

  Days to Ship:	1 Day(s) or more

• 

  Incision-Resistant Gloves, Cut Resistant gloves, NR # 5

  TRUSCO NAKAYAMA

  [Features]
  · Due to its long fibers, it creates far less dust, compared with Aramid fiber.
  · Has greater durability when compared with Aramid fiber.
  · Uses a weave of long polyethylene fiber, and has achieved a cut level of 5 in tests in conformance with EN388. Natural rubber is used for the slip prevention part.
  [Applications]
  · Work where cutting injuries are a risk, such as glass, steel, machinery and pressing.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, HyFlex' CR Plus Work Gloves

  ANSELL

  [Features]
  · Uses fiber that fuses Kevlar with stainless steel. This provides strong cut resistance and softness for excellent comfort.
  [Applications]
  · Automotive manufacturing processes
  · Handling press parts.
  · Glass manufacturing processes.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Polar Bear Supreme (For One Hand)

  ANSELL

  [Features]
  · Approximately 9 times more cut resistance strength than aramid fiber.
  · Can be chlorine-sterilized.
  · Can be repeatedly washed without shrinking.
  [Applications]
  · For processing, machining, etc. of thin steel plates.
  · Printing plants.
  · Maintenance of food processing plants.

  Days to Ship:	1 Day(s) or more

• 

  Cut Resistant Gloves, Kevlar, 10G [Thin Type]

  ATOM(SAFETY / PROTECTION SUPPLIES)

  [Features]
  · Uses long Kevlar fibers to reduce fuzz that can create dust as well as to maintain a pleasant texture similar to spun thread.
  · Optimal for workplaces that do not tolerate dust.
  · Thin 10-gauge type.
  [Applications]
  · Electrical product assembly work.
  · Precision machinery assembly work.
  · Final product inspection work.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Kevlar SD® Sanderon (gauge 15)

  ATOM(SAFETY / PROTECTION SUPPLIES)

  [Features]
  · Cut-resistant gloves that eliminate static with woven-in Kevlar SD and Thunderon anti-static fiber.
  · 15-gauge thin type enables detailed work.
  · Anti-static gloves that produce little dust.
  [Applications]
  · Electrical product assembly work.
  · Precision machinery assembly work.

  Days to Ship:	1 Day(s) or more

• 

  Incision-Resistant Gloves, Piercing and Cut Prevention Gloves

  KAMIKI

  [Features]
  ·The combination of the special compressed aramid fiber used in bulletproof vests and the soft nitrile sheet provides a strong piercing prevention effect.
  ·The addition of chains and the use of aramid fibers also have excellent cut prevention effects.
  [Applications]
  ·Please use it for cutting wounds with cylinder gears, deburring iron plates, and handling sharp knives.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Aramid Gloves (10 Gauge)

  TRUSCO NAKAYAMA

  [Features]
  · Features superior flame retardant, cut resistant and chemical resistant properties.
  · The cutting resistance is about 1.5 times that of cotton and about twice that of leather, and the tensile strength is about twice that of nylon.
  · It has a non-slip pad made of aramid fabric with high cutting resistance, high strength and wear resistance.
  [Applications]
  · Before furnace, forging protection, press, sheet metal working, welding operation.

  Days to Ship:	1 Day(s)

• 

  Aramid Gloves (15 Gauge / Thin Type)

  TRUSCO NAKAYAMA

  Thin gloves with excellent cutting resistance, low dust generation, and good durability.
  [Features]
  · Has low dust generating property as it uses a type of filament unlikely to generate dust and lint.
  · High-gauge (thin) knitting using high-strength "Kevlar®" fibers (15-gauge).
  · Provides sturdiness without sacrificing smooth hand movement.
  · Can be washed and used repeatedly, making it economical.
  [Applications]
  · As inner gloves to prevent cut injuries when performing work wearing rubber or plastic gloves at sites that handle glass, assembly of precision machinery, food, etc.
  · As gloves with good durability when working on trying and detailed work with your fingertips.

  Days to Ship:	1 Day(s)

• 

  High Performance Polyethylene Cut Resistant Gloves

  TRUSCO NAKAYAMA

  Gloves with excellent non-slip effects through the use of high strength polyethylene with great cutting resistance.
  [Features]
  · It utilizes ultra high-strength polyethylene "Dyneema R", with high cutting resistance at "Level 3" cutting evaluation with EN388 specifications.
  · Polyurethane treatment on the flat side is excellent in durability and non-slip properties.
  · Seamless-weave type (13 gauge) to provide an outstanding fit.
  [Applications]
  · Work sites that handle glass, iron & steel, machinery, presses, etc. where there is a risk of cut injuries.
  · For preventing cutting accidents during maintenance on equipment with blades attached, such as slicers.

  Days to Ship:	1 Day(s) or more

• 

  Zylon Cut-Resistant Gloves (Reinforced Palm)

  TRUSCO NAKAYAMA

  [Features]
  · High-level incision resistance gives it outstanding durability.
  · The palm patch area is reinforced with cowhide.
  [Applications]
  · Glass, iron and steel, machinery, presses, etc.

  Days to Ship:	Quote

• 

  Incision-Resistant Gloves, Heat Resistant / Cut Resistant Gloves

  TRUSCO NAKAYAMA

  [Features]
  · Palm side uses a high-strength material PBO fiber Zylon®.
  · The palms of the hand use para-aramid fibers.
  · The palm interior lining uses meta-type aramid fiber felt as a heat-shield.
  [Applications]
  · Construction and welding work.

  Days to Ship:	1 Day(s) or more

• 

  Incision-Resistant Gloves, Amide Power Gloves (For Women, 7 Gauge)

  YOSHINO

  [Features]
  · Uses 100% virgin fiber for light weight and full flexibility without stiffness.
  · Aramid fibers have a high cut resistance that is more than double that of leather and 60% stronger than steel.
  [Applications]
  · Factories, etc.

  Days to Ship:	1 Day(s)

• 

  Amide Power Gloves (cut resistant, flame resistant)

  YOSHINO

  [Features]
  · Uses 100% virgin fiber for softness without stiffness.
  · These thick finished gloves have two types of minutely woven super fibers: aramid fibers that have a cut resistance more than double that of leather and a flame-resistant fiber that is resistant to burning in open air.
  [Applications]
  · Workplaces where there is a risk of cut wounds and sparking such as construction, automobiles, machinery, steel, glass, shipbuilding, etc.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Amide Power Gloves (Cut Resistant, Sweat Absorbent)

  YOSHINO

  [Features]
  ·Made of 100% virgin fiber, it is flexible and not stiff.
  ·Aramid fibers on the surface are more than twice as resistant to cuts as leather and 60% higher than steel in cut resistance tests.
  ·The cotton lining provides excellent sweat absorption and is non-sticky.
  [Applications]
  ·Work sites where there is a risk of cuts, such as construction, automobiles, machinery, steel, glass, and shipbuilding.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves, 7 Gauge MK-100

  MIDORI ANZEN

  [Features]
  ・ Has incision resistance, high strength, and excellent heat resistance
  ・ It uses "Kevlar," a material with excellent cut resistance and abrasion resistance
  [Applications]
  ・ Automobile related, metal processing work, civil engineering / construction work, cleaning work

  Days to Ship:	Quote

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves, 7 Gauge, Non-Slip MK-100-V

  MIDORI ANZEN

  [Features]
  · Cut resistance with high strength and excellent heat resistance.
  · PVC non-slip grip over the palm.
  [Applications]
  · Automotive, metalworking, civil engineering and construction, and sanitation.

  Days to Ship:	1 Day(s)

• 

  Cut-Resistant Gloves "Bio-Grip Kevlar®" (12 Pairs)

  KAWANISHI INDUSTRY

  The base glove, which uses Kevlar threads, is double-coated with a nitrile rubber membrane for excellent resistance to cuts, tears, abrasions and oil. The unique non-slip processing provides excellent grip strength to prevent slipping even when working with small amounts of oil. Metalworking, glassworking.

  Days to Ship:	1 Day(s)

• 

  Cut-Resistant Gloves, Mac Mate DY MT985-L

  MAX(GLOVE)

  It has strong resistance to chemicals, ultraviolet rays, and water. The polyurethane coating provides excellent softness and grip. A level 5 (EN388) high cut resistance product. They have a 13 gauge fit and elasticity. For work with a risk of cuts, such as glass pressing.

  Days to Ship:	1 Day(s)

• 

  Cut-Resistant Oilproof Vinylove KV660

  SHOWA GLOVE

  Cut resistant gloves with an all-coated lining made of Kevlar and fully coated with vinyl chloride.
  [Features]
  ·Because the entire surface is coated with a specially formulated vinyl chloride, it has excellent oil resistance.
  ·Because it is coated with a special resin, it exhibits a high anti-slip effect.
  ·Seamless knitted gloves with no seams that fit your hands well and are easy to work with.
  [Applications]
  ·Convenient for machining work that requires cut resistance and oil resistance.
  ·Convenient for working with glass and metal.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut Resistant Gloves PU (Level 5)

  TRUSCO NAKAYAMA

  Has anti-slip properties due to a polyurethane coating. Due to its long fibers, it creates far less dust, compared with Aramid fiber. Has greater weather resistance when compared with Aramid fiber. A thin glove which is super strong due to a weave of long polyethylene and glass fiber, and has achieved a cut level of 5 in tests in conformance with EN388. Steel, machines, presses, and other dangerous cutting work.

  Days to Ship:	1 Day(s) or more

• 

  Incision-Resistant Gloves, Kevlar® Gloves

  AS ONE

  Kevlar Gloves
  Features excellent cut resistance.
  [Materials]Kevlar fiber, cow split leather (Palm part)

  Days to Ship:	16 Day(s) or more

• 

  Inner Gloves For Cut Injury Prevention

  AS ONE

  High gauge seamless gloves made of super aramid fiber. Can be laundered and used repeatedly.

  Days to Ship:	16 Day(s)

• 

  Protective inner gloves

  AS ONE

  These are protective inner gloves with excellent elasticity and cut-resistance with low dust generation.

  Days to Ship:	16 Day(s) or more

• 

  Amide Wrist Length Gloves (13 gauge)

  TOWA CORPORATION

  [Features]
  · Thin gloves for perfect fit and excellent flexibility.
  · Can also be used under gloves.
  [Applications]
  · Automotive. Metalworking.
  [Materials]
  · Aramid fiber, polyurethane

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves "Active Kevlar®"

  TOWA CORPORATION

  Nitrile rubber unlined cut resistant gloves that protect hands from the risk of cuts.
  [Features]
  ·Micro-finishing prevents slipping even when wet with oil, demonstrating high grip.
  ·The long wrist area provides extensive protection from dirt, abrasion, and the risk of cuts while working.
  ·Kevlar fiber is used for the handle, making it highly resistant to cuts.
  ·Nitrile rubber with oil resistance, abrasion resistance, and puncture resistance is used on the palm.
  ·Front: Nitrile rubber, Lining:: Kevlar
  [Applications]
  ·Metal parts processing, machine operation, machine parts manufacturing and assembly, automotive industry related.
  ·Work such as industrial waste disposal, glass and aluminum sash handling.
  
  

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves "Cut Resist, Army"

  TOWA CORPORATION

  [Features]
  · Combines high strength polyethylene fiber and glass fiber for excellent cut resistance.
  · Soft and easy-to-use gloves with an excellent fit.
  [Applications]
  · Glass industry.
  · Automotive.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves "Major Robe Kevlar®"

  TOWA CORPORATION

  [Features]
  ·Kevlar® fiber is used for excellent cut resistance.
  ·The palms are coated with natural rubber that has undergone a special anti-slip treatment (microfinish) for excellent grip. Use is
  [Applications]
  ·Automotive related, steel, glass.
  

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut Resistant Gloves Semiconductor Wire Fit No.521

  SHOWA GLOVE

  Cut-resistant seamless gloves with stainless steel wire thread and Kevlar
  [Features]
  ·Uses high-strength stainless steel wire thread and aramid fiber (Kevlar). Ambidextrous type.
  ・ Since long fibers are used, the generation of dust and lint from gloves is suppressed.
  ・ The product is designed with flexibility in mind and has excellent workability.
  ・ Unique 10 gauge seamless knitting with fine stitches and no stitching.
  [Applications]
  ・ Ideal for handling glass and blades due to cut resistance level 5 and high cut strength
  ・ Ideal as an inner for other gloves such as leather gloves

  Days to Ship:	1 Day(s) or more

• 

  Incision-Resistant Gloves, ChemiStar Fitted NO520

  SHOWA GLOVE

  Uncoated long-fiber seamless gloves with level 2 cut resistance that can also be used as inner gloves.
  [Features]
  ・ It uses ultra high strength polyethylene thread. It uses long fibers to reduce dust and lint from gloves.
  ・ Unique 13 gauge seamless knit gloves with fine stitches and no stitching.
  ·Can also be used as inner gloves. Ambidextrous type.
  ・ Overlock sewing of the wrist parts to prevent fraying is adopted.
  ·EN388 Cut Resistant Test: Level 2.
  * The strength may be insufficient depending on the type of work, so check carefully before using.
  [Applications]
  ·Low dust generation makes it ideal for inspection and packaging work. Can also be used as inner gloves.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves NO550

  SHOWA GLOVE

  Level 2 cut-resistant gloves knitted from ultra-high-strength polyethylene and coated with special polyurethane.
  
  [Features]
  · Full coating of the entire palm and back of the hand with special polyurethane that is both breathable and waterproof.
  · Reduces stuffiness by releasing moisture such as sweat to the outside of the gloves. Hem portion is overlocked to prevent fraying.
  · The high resin density and smooth surface of the coating area make it difficult for dirt to adhere to the surface, and any dirt that does adhere is easy to remove.
  · Long type to prevent exposure of the wrist area. Long fibers are used to reduce dust and lint generation from gloves.
  · The fiber portion is a unique 13-gauge seamless knit with a fine knit pattern and no seams.
  
  [Application]
  · Ideal for steel and glass processing work where there is a risk of cutting accidents due to burrs, edges, and blades.
  · Low dust emission makes it ideal for work involving glass substrates and machine assembly.

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves, Cut-Resistant Gloves ChemiStar Finger (Low Dust Generation Type)

  SHOWA GLOVE

  Cut-resistant fingertip anti-slip gloves knitted with high strength polyethylene thread
  [Features]
  ・ Uses high-strength polyethylene thread. Overlock sewing of the wrist parts to prevent fraying. Ambidextrous type.
  ・ Since the foamed polyurethane is coated on the fingertips, it has a high anti-slip effect and excellent breathability.
  ・ Since long fibers are used, the generation of dust and lint from gloves is suppressed.
  ・ The fiber part is a unique 13 gauge seamless knitting with fine stitches and no stitching.
  [Applications]
  ・ Ideal for steel and glass processing work where burrs, edges and blades may cause a cut accident
  ・ High fit makes it ideal for working with glass substrates and assembling machines

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves GP-KV2R

  SHOWA GLOVE

  Cut-resistant gloves with high-strength Kevlar coating on the palms of nitrile rubber with excellent abrasion resistance.
  [Features]
  ·Uses high-strength aramid fiber (Kevlar). Overlock sewing of the wrist parts to prevent fraying.
  * Kevlar is a registered trademark of EIDupont.
  ·Since the palm is coated with nitrile rubber, it is resistant to oil and has excellent abrasion resistance.
  ·The special anti-slip processing provides a high anti-slip effect.
  ·The fiber part is a unique 10-gauge seamless weave with fine stitches and no seams.
  [Applications]
  ・ With a high cut resistance of cut resistance level 4, it is ideal for transporting and machining glass and building materials, and treating waste.

  Days to Ship:	1 Day(s) or more

• 

  Incision-Resistant Gloves S-TEXGP-1

  SHOWA GLOVE

  Days to Ship:	1 Day(s)

• 

  Incision-Resistant Gloves S-TEX GP-2

  SHOWA GLOVE

  [Features]
  · Soft cut-resistant gloves with excellent workability made using stainless steel wire thread and polyester fibers.
  · The entire gloves are lengthened to protect the wrists.
  [Applications]
  · Sheet metal and thin plate glass processing.

  Days to Ship:	8 Day(s) or more

Loading...