Stepladders

• 

  Stepstool/Stepladder (Aluminum Alloy/With Leg Covers)

  TRUSCO NAKAYAMA

  Aluminum stepladder with a wide top plate and installation dimensions that offer a sense of stability.
  [Features]
  · The anti-slip cap is made of non-PVC resin and elastomer that do not generate harmful gas when incinerated.
  · With engagement (prevention of lateral misalignment in storage) function.
  · Durability is improved by installing reinforcing brackets in two places: below the second step from the top and below the bottom step.
  · Stepladder leg cover (TAC-2) 1 set (4 units) included.
  [Applications]
  · Combination ladder and stepladder.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Stepladder/Ladder (Insulation) EA903SD-4

  ESCO

  【Product Specifications】
  ・Maximum load-100kgf
  ・Material-Pole：FRP, Step：Aluminum alloy
  ・Withstand voltage is 75,000 V. Excellent in electrical insulation
  ・With withstand voltage test result report
  ・Height of top plate-1.68m
  ・Ladder length-3.57m
  ・Weight-9.1kg
  ・Folded size(WxDxH)-645x170x1810mm

  Days to Ship:	9 Day(s) or more

• 

  Stepladder Doubling as Ladder With Non-Slip Rubber MXJ

  ALINCO

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Telescopic Ladder/Stepladder, Karunobi (Leg Extension Type) SCL

  PICA CORP

  An extendable stepladder with tension applied to the versatile feet to enable the angle to be fixed.
  [Features]
  · Compatible with level differences up to approximately 31 cm.
  · Tension is applied to the versatile feet to enable the angle to be fixed and prevent unsteadiness when installed.
  [Applications]
  · Can be used not only on flat locations, but also in locations with level difference.
  · The extendable legs can be retracted for a more compact size for carrying into buildings than conventional stepladders.

  Days to Ship:	19 Day(s) or more

• 

  Dedicated Stepladder (Welding Type for Professionals)

  PICA CORP

  Special welding type stepladder certified by the Temporary Construction Industry Association for commercial use.
  [Features]
  ·It folds flat when stored, so it can be stacked for storage.
  ·Top panel dimensions: 320×160mm.
  ·wide tread: 60 mm.
  ·Maximum operating weight: 160 kg.
  [Applications]
  ·For working at heights.
  ·It can be used at temporary construction sites because it has passed the Temporary Construction Industry Association certification.

  Days to Ship:	Quote

• 

  Extending Length Stepladder (Aluminum Alloy), Skyscraper

  HASEGAWA KOGYO

  Excellent for work at height in locations with a high ceiling or wall that has large level differences, such as event halls, lecture theaters or stadium stands, etc. It can eliminate steps up to a maximum of about 2 m, making it possible to work at heights and wall surfaces where there are large steps.

  • STOCK

  Days to Ship:	1 Day(s) or more

• 

  Workbench EA903AJ-8

  ESCO

  【Product Specifications】
  ・Maximum load-150kgf
  ・Top plate dim.-250 x 250mm
  ・Aluminum alloy
  ・Top plate H…1.62m
  ・Level…8
  ・Weight…7.5kg

  Days to Ship:	16 Day(s) or more

• 

  Flexible Leg End Device

  ALINCO

  [Features]
  ·It is a bolt type and can be easily replaced.
  ·Can be attached to telescopic stepladders PRT-F, PRH-F, PRW-F, telescopic scaffolds, VSR-F, and PXGE-F!

  Days to Ship:	16 Day(s) or more

• 

  Cushion Guard for Step Ladder Or Scaffolding

  ALINCO

  [Features]
  · Cushioning material for preventing damage due to contact or falling of stepladder or scaffold plank.

  Days to Ship:	21 Day(s) or more

• 

  Stepladder Doubling as Ladder Eco Series Top Plate Height (m) 0.81-1.99

  HASEGAWA KOGYO

  [Features]
  · An aluminum stepladder with a step width of 60 mm, which is larger than the typical 40 mm width.
  · The feet can be replaced with a screwdriver.

  Days to Ship:	12 Day(s) or more

• 

  Work Tray Compact stepladder

  HASEGAWA KOGYO

  [Features]
  ・ A tray that serves as a pan for screws, tools, etc., can be attached to the top of the combi ladder

  Days to Ship:	16 Day(s) or more

• 

  Dedicated Stepladder Wing Step with Platform

  HASEGAWA KOGYO

  [Features]
  ·It is a wide-space aluminum stepladder with a top plate size of 350 × 450 mm.
  ·Since the upper frame is attached, you can work while standing on the top board.
  ·Since the top plate can be folded in two, it does not take up much storage space.

  Days to Ship:	17 Day(s) or more

• 

  Dedicated Stepladder (Long and Strong Type)

  HASEGAWA KOGYO

  A long dedicated stepladder that is a standard type and a best-seller.
  [Features]
  · The wide 55 mm steps are strong and designed without a flange to make ascending and descending easy and minimize fatigue.
  · Comes with protective material that is gentle on walls.
  · The XAM3.0-33 opening stopper part is a cross type, and XAM2.0-24, XAM2.0-27 and XAM2.0-30 have a large, single-action opening stopper.
  · Available in a wide range of height variations.
  [Applications]
  · Optimal for general work at height and maintenance work.

  Days to Ship:	Quote

• 

  Dedicated Ladder, Professional Wide Top Board Type Top Plate Height: 0.9-3 m

  HASEGAWA KOGYO

  A strong dedicated stepladder with a wide top board and suitable for diverse applications.
  [Features]
  · The wide top board (350 × 300 mm) consisting of 3 boards is the largest area in a stepladder product.
  · The ascending angle is 70° for easy ascending and descending.
  · Designed with projections and grooves to prevent lateral deviation of the legs during storage.
  · Provides a wide top board space.
  [Applications]
  · Can be used as a maintenance tool in a wide range of applications, from harsh worksites to factories and stores, etc.

  • STOCK

  Days to Ship:	16 Day(s) or more

• 

  Dedicated Stepladder Top Plate Height: 0.9-2.7 m

  NAKAO

  A stepladder with red anti-slip molding that prevents slipping and loss of footing.
  [Features]
  · A wide type of aluminum dedicated stepladder with a top board and step width of 60 mm, which comes with anti-slip resin molding.
  · The top board comes with a stopper for preventing scaffold plank horizontal deviation.
  · The top board and steps have a double reinforced structure.
  [Applications]
  · General work at height at worksites or factories, etc.

  Days to Ship:	Quote

• 

  Ladder Dual-purpose Stepladder SUPER JOB

  PICA CORP

  A dual-purpose ladder and stepladder with wide steps of 60 mm on both sides.
  [Features]
  · The wide steps of 60 mm on both sides make ascending and descending easy whether used as a ladder or a stepladder.
  · An elastomer is used as the anti-slip cap material.
  · A middle folding type opening stopper makes it easy to open and close the stepladder.
  · High quality, all anodized aluminum finish.
  [Applications]
  · The steps are wider than typical stepladders for stable ascending, descending and work.

  Days to Ship:	16 Day(s) or more

• 

  Stepladder Doubling as Ladder PRO Type Top Plate Height (m) 0.81-1.99

  PICA CORP

  [Features]
  · Large ladder rails and anti-slip caps provide greater stability.
  · The ladder rails are finished with anodized aluminum for superior corrosion resistance.
  · The feet can be replaced with a screwdriver.

  Days to Ship:	16 Day(s) or more

• 

  Dedicated Stepladder Super Job JOB Type

  PICA CORP

  [Features]
  · Step width of 60 mm is wider than conventional products.
  · High quality, all anodized aluminum finish.
  · The feet can be replaced with a screwdriver.

  Days to Ship:	Quote

• 

  FRP Dedicated Stepladder

  PICA CORP

  A dedicated stepladder made of FRP with a maximum usable weight of 130 kg and a wide footrest of 76 mm.
  [Features]
  ·It can be raised and lowered from both sides.
  ·For electrical work with excellent insulation.
  ·Withstanding voltage 35.000 V.
  [Applications]
  ·For working at heights (when using a stepladder).
  ·Since the struts are made of FRP, they can also be used in electrical work.

  Days to Ship:	Quote

• 

  Dedicated Ladder, Professional Wide Top Board Type Top Plate Height: 1.2-3 m

  PICA CORP

  A dedicated stepladder for industrial use with a maximum weight capacity of 160 kg.
  [Features]
  · A multi-purpose aluminum stepladder with a wide top board.
  · The wide steps and gentle angle (70 degrees) make ascending and descending easy.
  [Applications]
  · The thick ladder rails and gentle angle enable larger installation dimensions and more stable work.

  Days to Ship:	16 Day(s) or more

• 

  Leg Cover for Stepladder (Bottom Surface Protrusion)

  TRUSCO NAKAYAMA

  [Features]
  ·Attach it to the legs of a footstool or stepladder to prevent scratches on the floor during indoor work.
  ·Anti-slip for safety.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Aluminum Dedicated Stand

  NAKAO

  A dedicated stepladder with a wide top board and wide step material on each level for excellent workability and stability.

  Days to Ship:	Quote

• 

  Four-Leg Adjustable Ladder, Karunobi (Extendable Leg Type) SCL

  PICA CORP

  An extendable stepladder compatible with level differences up to 31 cm.
  [Features]
  · An aluminum stepladder with wide steps of 55 mm that are easy to ascend and descend and improve workability.
  · A design prioritizing safety that uses a double lock mechanism for the extending operation lever.
  · The anodized aluminum finish provides high corrosion and dirt resistance, and is approximately 10% lighter than conventional products.
  · A 4-leg adjustable, standard type ladder.
  [Applications]
  · Can be used not only on flat locations, but also in locations with level difference.
  · The extendable legs can be retracted for a more compact size for carrying into buildings than conventional stepladders.

  Days to Ship:	16 Day(s) or more

• 

  Footstool, Number of Steps 2 To 5 Steps

  AS ONE

  The PFD type enables easy lifting and work. CTB types have a wide step size and gentle slope, and are easy to raise and lower.

  Days to Ship:	Quote

• 

  Pro Work Chair

  AS ONE

  Has a swinging function whose seat moves forward, backward, right, and left according to your posture to reduce burden on the back or spine. No need to be worried about storage space as it is a foldable type.

  Days to Ship:	Quote

• 

  Work Platform Made of Aluminum with Striped Plate

  AS ONE

  [Features]
  ·A finished product that does not require assembly.
  ·The top board is a checkered plate, so it has a high anti-slip effect

  Days to Ship:	21 Day(s) or more

• 

  Footstool, Number of Steps 1 To 3 Steps

  AS ONE

  [Features]
  ·It is an assembly type step stool.
  Materials: Aluminum alloy
  Maximum working load: 150 kg
  Step width: 200 mm

  Days to Ship:	Quote

• 

  Scaffold Platform, RAKUDA-MINI

  AS ONE

  Compact size allows comfortable use in confined spaces. The steps are broad, and the board rungs have a non-slip molding to prevent loss of footing. The top plate is processed with anti-slip burring.

  Days to Ship:	Quote

• 

  2-Level Step Stool

  AS ONE

  [Features]
  ·2-stage step stool
  ·The step parts are anti-slip processed.
  Materials: PP (polypropylene), rubber

  Days to Ship:	Quote

• 

  Aluminum Tripod

  ALUMIS

  Days to Ship:	1 Day(s)

• 

  Leg Cover for Stepladder (with Stoppers)

  TRUSCO NAKAYAMA

  [Features]
  · Leg cover suitable for protecting floors when working indoors.
  · The polyurethane special sheet exhibits superior anti-slip effect.
  · It uses rubber to prevent coming off the stepladder.

  Days to Ship:	1 Day(s)

• 

  Long Aluminum Stepladder PRS

  ALINCO

  A long dedicated stepladder that is a standard type and suitable for work at height.
  [Features]
  · The opening stopper is a convenient single-action type.
  · Equipped as standard with triangular reinforcement plates to reduce swaying.
  · Lining plates have been added to reinforce the feet.
  · Equipped with wide steps of 55 mm.
  [Applications]
  · For ascending and descending when performing work at height.

  Days to Ship:	Quote

Loading...