Scaffold Planks

• 

  Scaffold Plank AD Al Stage (One Side Use Type)

  HASEGAWA KOGYO

  The most lightweight scaffold plank, used on one side only.
  [Features]
  · A product with water drainage holes, a flanged circumference on the front surface and anti-slip rubber attached to the rear surface.
  · A scaffold plank certified by the Scaffolding and Construction Equipment Association of Japan, which is the lightest scaffold plank for easy carrying.
  [Applications]
  · Can be used for scaffolding at a worksite, and can be placed on stepladders, etc. for use as a work bench.

  Days to Ship:	16 Day(s) or more

• 

  Bullman Metal Fitting C Type

  KONDOTEC

  [Features]
  A C-type bullman metal fitting that is widely used as components for temporary scaffolding.
  Certified by the Scaffolding and Construction Equipment Association of Japan(C-50, C-60).
  [Applications]
  Suitable for joining 2 layers of steel.

  Days to Ship:	12 Day(s) or more

• 

  Single Pipe Clamp (Same Diameter Type / Combination Type)

  TAIYO SEIKI IRON WORKS

  A fitting used to connect a stanchion and a single pipe.
  [Features]
  ·Applicable pipe diameter: Same diameter type (⌀48.6) / dual-purpose type (⌀42.7 to 48.6).
  ·Type: Orthogonal type/flexible type.
  · (No company) Temporary Construction Industry Association certified product.
  ·Weight: Same diameter type 700 g/Common type 720 g.
  ·A clamp for connecting a strut and a single pipe.
  [Applications]
  ·Temporary materials.

  Days to Ship:	12 Day(s)

• 

  ø48.6/ø42.7 Combined Pipe Clamp (Orthogonal)

  KONDOTEC

  [Features]
  A clamp that can be also used for orthogonal type and is a component for temporary scaffolding.
  Can be used for single tubes of both ø48.6 mm and ø42.7 mm.
  This product has been certified by the Scaffolding and Construction Equipment Association of Japan.
  [Applications]
  Suitable for clamping pipes.

  Days to Ship:	11 Day(s) or more

• 

  Scaffold Plank Connecting Plate Space Cover

  ARAO

  [Features]
  · Made of reinforced polypropylene that is light yet tough, and a joint type, therefore can be used with all scaffold width sizes.
  [Applications]
  · Prevents stumbling or objects from falling from the gap between the planks.

  Days to Ship:	12 Day(s)

• 

  Scaffold Board All Stage (Wide and Heavy Type)

  HASEGAWA KOGYO

  [Features]
  ·The surface is processed with a circumferential flange that is non-slip.
  ·The back is equipped with non-slip rubber.

  Days to Ship:	16 Day(s) or more

• 

  Telescopic Scaffold Board Sliding Pit

  HASEGAWA KOGYO

  [Features]
  · Uses a pin lever system that can adjust in increments of approximately 50 mm for the extension of scaffolding.
  · Comes with handle for convenient carrying.

  Days to Ship:	17 Day(s) or more

• 

  Scaffold Plank (Light Working Type)

  PICA CORP

  Temporary Construction Industry Association certified, standard type scaffold board.
  [Features]
  ·The surface is press-type non-slip processing.
  ·The back has beads (non-slip rubber).
  ·Support spacing 1800 mm or less.
  [Applications]
  ·As scaffolding at height.
  ·It is widely used when working at heights such as construction sites and inspection work.

  Days to Ship:	9 Day(s) or more

• 

  Base (Fixed Base/Jack Base)

  TAIYO SEIKI IRON WORKS

  A base for fixing single pipes or other pipes at construction sites.
  [Features]
  · Fixed base (applicable pipe diameter: ø48.6, base size: 120 × 120 mm, weight: 700 g).
  · Jack base (dimensions: ø34 × 380 L, base size: 140 × 140 mm, weight: 3,300 g).
  · Product certified by Scaffolding and Construction Equipment Association of Japan.
  [Applications]
  · Temporary construction material.
  · For fixing pipe scaffolding.

  Days to Ship:	8 Day(s) or more

• 

  Clamp Bolt Cover

  ARAO

  [Features]
  · Optimal as a cover for clamp bolts.
  [Applications]
  · Protection for clamp bolts.

  Days to Ship:	13 Day(s) or more

• 

  Single Pipe Drive-in Tip

  SRG TAKAMIYA

  This is the tip for driving a single pipe into the ground.
  Materials: steel
  Weight (g): 100

  Days to Ship:	9 Day(s) or more

• 

  Clamp for Pipe EA948TA-11

  ESCO

  【Product Specifications】
  ・Materials for temporary scaffolding
  ・For single pipes of dia. 48.6 and dia. 42.7mm
  ・Body dim.-47 x 76mm
  ・Weight-0.36kg
  ・Material-Steel

  Days to Ship:	8 Day(s) or more

• 

  Single Pipe (with Attached Pin)

  ALINCO

  A single tube pipe that can be used for various purposes such as simple scaffolding boards and enclosures.
  [Features]
  ·Made of steel.
  ·Since it has a pin, it can be used by connecting.
  [Applications]
  ·For scaffolding, enclosures, etc.

  Days to Ship:	9 Day(s) or more

• 

  Telescopic Step-Through Prevention Scaffold Board Easy Step Thick

  NAKAO

  [Features]
  · Extendable in increments of 250 mm.
  · The top board has an anti-slip design.
  · Developed to prevent stepping through a collapsed roof, etc., as specified in Article 524 of the Ordinance on Industrial Safety and Hygiene of Japan.

  Days to Ship:	19 Day(s) or more

• 

  Joint, Straight Joint JTT

  TAIYO SEIKI IRON WORKS

  [Features]
  ・ Used in places where loads are applied, such as scaffolding
  ·Temporary Construction Industry Association Certification Accepted Product

  Days to Ship:	9 Day(s) or more

• 

  Joint, C-Type Joint JTC

  TAIYO SEIKI IRON WORKS

  [Features]
  ・ It prevents rattling of single pipe by tightening a bolt
  ・ It is used for temporary enclosures, etc.
  ·Temporary Construction Industry Association Certification Accepted Product

  Days to Ship:	9 Day(s) or more

• 

  Scaffold Cushion (Voidless)

  ARAO

  [Features]
  · Single-action mounted cushioning material with easy removal during scaffold disassembly, simply by pulling the top of the film.
  · Simply wind around to isolate the slab.
  

  Days to Ship:	12 Day(s)

• 

  Jackpot for Compression Jack

  ARAO

  [Features]
  · Uses a special resin for strong resistance to temperature changes from hot to cold, and does not leave any marks on walls.
  

  Days to Ship:	35 Day(s)

• 

  Jack Socks

  ARAO

  [Features]
  · Compatible with compression jacks with a diameter of ø134 to 143 made by various manufacturers.
  · Made of cotton material to avoid complaints due to heat and prevent scratches on other parts due to friction, etc.
  [Applications]
  · Prevents scratches on other parts due to friction, etc.

  Days to Ship:	35 Day(s)

• 

  Jack Pillow

  ARAO

  [Features]
  · Can be mounted as cushioning material to large sized jack bases or compression jacks. Optimal as a wall rest for a siding board.
  

  Days to Ship:	35 Day(s)

• 

  Rubber Base for Scaffold Jack

  ARAO

  [Features]
  · Made of reinforced rubber and comes with strong ribs on the rear surface for optimal slipping and damage prevention. Optimal for roofs because there is no deposition or contamination on other parts due to heat.
  [Applications]
  · For slipping and damage prevention.

  Days to Ship:	12 Day(s)

• 

  Roof Base α for Scaffold Jack

  ARAO

  [Features]
  · No deposits on other parts due to heat.
  · The base is a sliding type mountable from a straight horizontal direction, enabling use in any position.
  [Applications]
  · For sheds.

  Days to Ship:	35 Day(s)

• 

  Single Pipe Drive-in Cap

  ARAO

  [Features]
  ·The "tip" is ideal for driving single pipes into the ground.
  ·The resin is made of impact-resistant reinforced plastic.
  ·Resin pipes do not remain in the ground when the single pipe is pulled out.
  ·A "washer" is placed over the single pipe to protect the upper part when driving.

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Single Pipe Cover Trapica

  ARAO

  [Features]
  · Mountable on ø48.6 pipes with a single action
  · The yellow reflective tape stands out even in dark locations.
  

  Days to Ship:	12 Day(s)

• 

  Scaffold Protective Sheet B - Protect Sheet

  ARAO

  [Features]
  · Installed around the base to protect against dirt such as splattered mud, etc. The mesh structure provides excellent permeability. Also helps improve the appearance of the worksite.
  [Applications]
  · Protects against dirt such as splattered mud, etc.

  Days to Ship:	45 Day(s)

• 

  Single Pipe Safe Marked Stand-Out Type Cover

  NICHIDAIKOGYO

  [Features]
  · A single-action safety indicator cover that can be fitted without tape.
  · Lightweight and easy to mount and remove.
  · Convenient to carry and reusable.
  · Easy to cut with a saw.
  · No cushioning properties.
  · The 3 white lines stand out clearly.
  · A banner can be placed in the cutout section.
  · Can also be installed on and protect struts up to approximately 3 inches.
  [Applications]
  · As a safety indicator for single pipes (scaffolding).
  · For various poles
  · For struts at factories or warehouses.

  Days to Ship:	12 Day(s)

• 

  Super Light Pipe (with Pin-Less)

  DAIWAST

  [Features]
  ·It is a NETIS registered technology of the Ministry of Land, Infrastructure, Transport and Tourism. (KK-02002-VE)
  ·High-strength steel is used to reduce weight, making it about 25% lighter than conventional products while maintaining the same strength.

  Days to Ship:	8 Day(s) or more

• 

  Super Light Pipe (with Pin)

  DAIWAST

  [Features]
  · A technology registered with NETIS of the Ministry of Land, Infrastructure and Transport in Japan. (KK-02002-V)
  · Made of high-tensile steel to reduce weight by approximately 25% while maintaining strength equivalent to conventional products.

  Days to Ship:	9 Day(s) or more

• 

  TOP Square Clamp, 60 Square X φ48.6

  SRG TAKAMIYA

  [Features]
  · A clamp for connecting a single pipe with a 60 square steel pipe. Comes with nut disconnection stoppers.

  Days to Ship:	12 Day(s)

• 

  3-Series Clamp

  SRG TAKAMIYA

  [Features]
  ·A clamp for connecting three single pipes
  ·Orthogonal type in one place

  Days to Ship:	12 Day(s)

• 

  TOP Holly Hanger

  SRG TAKAMIYA

  A metal fitting for fixing sheet to single pipes or frame scaffolding. Clamp for single tube
  Materials: steel

  Days to Ship:	9 Day(s) or more

• 

  TOP Large Brace Clamp (Same Diameter Model)

  SRG TAKAMIYA

  [Features]
  · A clamp for connecting single pipes. A specification that prevents nut disconnection.

  Days to Ship:	12 Day(s)

• 

  Screw Anchor

  SRG TAKAMIYA

  [Features]
  ·A steel anchor that is driven into wood.
  ·The material is steel.

  Days to Ship:	9 Day(s) or more

• 

  Tall Nuts

  SRG TAKAMIYA

  When used with screw anchors, it can be used as a female thread.
  Materials: steel
  Weight (g): 60

  Days to Ship:	9 Day(s) or more

• 

  Banister Joint

  SRG TAKAMIYA

  [Features]
  ·It is a joint for connecting a single pipe and a single pipe. (not for scaffolding specifications)

  Days to Ship:	9 Day(s) or more

• 

  Single Pipe Drive-in Head

  SRG TAKAMIYA

  A head used when driving a single pipe into the ground.
  Materials: steel
  Weight (g): 140

  Days to Ship:	9 Day(s) or more

• 

  Pipe Joint for Single Pipe

  ALINCO

  Joint metal fittings that enable easy construction of fences, tables, workbenches, scaffolding boards, etc.
  [Features]
  ·Depending on your ideas, you can easily turn a variety of things into professional results.
  [Applications]
  ·Exclusively for commercially available single tube pipes with an outer diameter of 48.6 mm.

  Days to Ship:	1 Day(s)

• 

  Safety Band

  KONDOTEC

  [Features]
  A safety band that is a component for temporary scaffolding.
  [Applications]
  In addition to preventing scaffolding plank from moving, it can also be used to temporarily secure cargo and to secure truck sheets.

  Days to Ship:	12 Day(s) or more

• 

  End Stopper C Type (For 600 To 1,219-mm Frames)

  KONDOTEC

  [Features]
  · Safety-focused design
  · No rotation of the outer pipe and the inner pipe.
  · The clamp is always in the same direction, providing excellent workability.
  · Uses round pipe, making it easy to grip and to prevent dropping accidents, thereby improving on-site safety.
  · The outer pipe includes a fall prevention mechanism to prevent the inner pipe from coming out.
  · Emphasis on workability
  · Just one of these can be used to attach frames between 600 and 1,219.
  · With just one of these, inventory control becomes a breeze.
  · The thumbscrew at the end of the outer pipe helps prevent unintended sliding.
  · Hot-dip galvanized for rust-resistance and a longer service life. (Excluding the thumbscrew and rivets).

  Days to Ship:	12 Day(s) or more

• 

  KT Step

  KONDOTEC

  [Features]
  · Adjustable step equipped with 4-step (40 degrees, 48 degrees, 55 degrees and 66 degrees) angle adjustment functionality. Easy to assemble. Boasts excellent safety, workability, storability and cost-performance.
  · The angle is freely adjustable without removing the bolts and nuts; the latching hole that is integrated on the dual-use clamp connected to the single pipe can be slid just by loosening the bolts and nuts, making angle adjustment (40 degrees, 48 degrees, 55 degrees, 66 degrees) easy.
  · "Stacked ribs" makes storage and transportation easy; The "stacked ribs" have been machined with undulations on the end of the stepping board and function to prevent load collapses when step stacking, enabling neat stacking for storage.
  · Space saving and highly economical.

  Days to Ship:	12 Day(s) or more

• 

  KT Bracket (Bolt Type)

  KONDOTEC

  [Features]
  A bracket that is a component for temporary scaffolding.
  This product has been certified by the Scaffolding and Construction Equipment Association of Japan.
  [Applications]
  Suitable as a support for work floors.

  Days to Ship:	14 Day(s) or more

• 

  KT Corner Joint (For 48.6)

  KONDOTEC

  [Features]
  · Compared to single pipe clamps
  · Since the single pipes do not intersect, it is possible to hold pipes that are joined together at the same height.
  · The ends of the single pipes do not have overhang, helping save on space.
  Also mitigates risk of injury.
  · Ideal for the corner parts of temporary enclosures, and the like at construction sites and material storage sites.
  · Movable range: 65° to 290°.

  Days to Ship:	14 Day(s) or more

• 

  Mini Jack

  KONDOTEC

  [Features]
  A mini jack base that is a component for temporary scaffolding.
  Because it is a mini type, it is lightweight and can be finely adjusted.
  [Applications]
  Suitable for changing the height of a base.

  Days to Ship:	13 Day(s) or more

• 

  Same Diameter Clamp

  KONDOTEC

  KONDOTEC same diameter clamp.
  A member for temporary scaffolding.
  There are 2 types.

  Days to Ship:	11 Day(s) or more

• 

  Triple Clamp

  KONDOTEC

  KONDOTEC triple clamp.
  A member for temporary scaffolding.
  There are 2 types.

  Days to Ship:	12 Day(s) or more

Loading...