(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Carbide Square End Mills（Coating：Non-Coated）

An online store for carbide square end mills. Divided into categories of square / multi-function / high helical / roughing / long neck square. In MISUMI e-catalog, specifications/dimensions of brand, blade diameter, blade length, shank diameter, total length, compatible work materials, coating, etc. can be selected with one click, so you can easily find the desired carbide square end mill.
[What is a carbide square end mill?]
A type of milling cutter. It is a tool that can perform complicated shaping such as linear or non-linear side surfaces inside grooves and holes, by using a carbide base material, with a cutting edge on the outside or the end surface, and moving the rotated tool in multiple directions. Major Japanese cutting manufacturer products are now expanding their areas of activity in the world manufacturing industry.

Search by specifying the lower class category

200 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less

1
2
3
4
5
Next >>

Carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications

Volume Discount

Non-Coated

General Steel

2 Flutes

S (Short)
Days to Ship: 12 Day(s) or more
Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS

OSG

For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.

Days to Ship: 1 Day(s) or more
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS

OSG

With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.

Days to Ship: 16 Day(s) or more
Solid Spiral End Mill SSM2000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Work Material: General Steel/Cast Iron/Aluminum
Coating: Uncoated
Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.) 2
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Days to Ship: 16 Day(s) or more
Carbide Center V End Mill KSV-2

KYOWA SEIKO

Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

Days to Ship: 12 Day(s) or more
Carbide Long Blade End Mill KSEL-2

KYOWA SEIKO

Carbide long flute length end mill, KSEL-2
·An end mill with 4 to 12 times flute length.
·Helix angle: Standard helix angle (30 to 44°)

Days to Ship: 8 Day(s) or more
Carbide square end mill, 2-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that produces high-quality finish supports a wide range of machining areas

Volume Discount

Non-Coated

General Steel

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide square end mill, 4-flute / 4D Flute Length (long) model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated

General Steel

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
2-flute short type MG-EDS [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Days to Ship: 16 Day(s) or more
CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]

UNION TOOL

[Features]
· Long Neck End Mill for Resin Processing
· Ideal for deep grooving thanks to the undercut processing of the neck part

Days to Ship: 12 Day(s) or more
TAL2, 2-flute, Alumik 2000 End Mill AH10

ASAHI TOOLS

Rake surface, peripheral blade and bottom blade are mirror polished with #2000 which suppresses built-up edges. The rake angle, clearance angle, and sharpness have been improved compared to the conventional end mill.

Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model

MISUMI

Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity!

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 12 Day(s) or more
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

MISUMI

The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length

Volume Discount

Non-Coated

General Steel

2 Flutes
Days to Ship: 11 Day(s) or more
ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum

NS TOOL

Capable of stable high efficiency machining under all conditions. High-efficiency heavy cutting type with enhanced chip discharge performance

Days to Ship: 16 Day(s) or more
NX-30 Lead 30 End Mill

NS TOOL

The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing

Days to Ship: 10 Day(s) or more
NX-35 Lead 35 End Mill

NS TOOL

The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining

Days to Ship: 10 Day(s) or more
End Mill for Carbide Aluminum AES2□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Multi-function square end mill (carbide) for high-efficiency machining from grooves to side surfaces.
[Features]
· Made with a shape that delivers both excellent discharge of cutting chips and high rigidity, enabling a feed speed of 2,000 mm/min in groove machining.
·

Days to Ship: 8 Day(s) or more
PCD square end mill PCDSE

NS TOOL

A highly stable cutting surface has been realized for cutting cemented carbide. Nano-level surface roughness required for high-precision machining can be achieved

Days to Ship: 16 Day(s) or more
SLE2 Long Shank Slotting End Mill G2

ASAHI TOOLS

φ3 to φ7 are tip brazing types. Uses a long shank to increase the versatility of the protruding length.

Days to Ship: 16 Day(s) or more
Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 16 Day(s) or more
Spiral Cut End Mill SPC type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 16 Day(s) or more
Unequal Flute Spacing / Wiper Cutting Edge Type for Aluminum and Nonferrous Metals 3NESM

KYOCERA

The base blade has a wiper cutting edge that improves the surface quality of the base.

Days to Ship: 16 Day(s) or more
End Mill with 2 Carbide Flutes and Corner C Face KSC-2

KYOWA SEIKO

[Applications]It can be used for flat surface machining, side machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
Carbide Miniature End Mill KMSE‐2

KYOWA SEIKO

[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
Carbide square end mill, 4-flute / 2D Flute Length (short) model

MISUMI

The 2D flute length type with high versatility achieves high-precision processing including grooving

Volume Discount

Non-Coated

General Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
Carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

Volume Discount

Non-Coated

General Steel

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model

MISUMI

A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type

MISUMI

A non-coated type that does not impair the sharpness of the blade

Volume Discount

Non-Coated

Aluminum

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining / 2-Flute / 45° Spiral / 3D Blade Length (Regular) Type

MISUMI

Affordable, non-coated type of the Aluminum Processing Series

Volume Discount

Non-Coated

Aluminum

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model

MISUMI

The large rake angle prevents the built-up edge that's unique to aluminum

Volume Discount

Non-Coated

Aluminum

2 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model

MISUMI

Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter

Volume Discount

Non-Coated

Aluminum

2 Flutes

EXL (Extra Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

MISUMI

3-flute structure that's excellent in discharging chips

Volume Discount

Non-Coated

Aluminum

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model

MISUMI

[Features]
·Uses a sharp cutting edge to suppress the built-up edge unique to aluminum
·The unique chip pocket shape enables grooving with a depth of cut equivalent to that of a 2-flute cutting tool.
·Can be re-polished. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount

Non-Coated

Aluminum

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

2 types that are recommended in the standing-wall machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model

MISUMI

2 types that are recommended in the standing-wall machining of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

MISUMI

Significantly reduces the roughing time of aluminum

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model

MISUMI

A non-coated type that has achieved both the cost reduction and processing performance

Volume Discount

Non-Coated

Copper

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model

MISUMI

[Features]
·Uncoated product with excellent cost-effectiveness
·Deep digging is possible due to long flute length
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

Graphite

2 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

MISUMI

[Features]
·Uncoated product with excellent cost-effectiveness
·Deep digging is possible due to long flute length
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Non-Coated

Graphite

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model

MISUMI

The cutting edge with an emphasis on sharpness is ideal for resin machining

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model

MISUMI

Extra long type for resin that's capable of deep processing in the first shot

Volume Discount

Non-Coated

Resin

2 Flutes

EXL (Extra Long)
Days to Ship: 16 Day(s) or more
Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

MISUMI

Available in 10 sizes including the long shank type

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model

MISUMI

End mill for resin that's capable of deep engraving

Volume Discount

Non-Coated

Resin

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
Carbide Blade Neck Relief End Mill, 2-Flute / Short Model

MISUMI

A blade relief type that's not affected by the interference of tools

General Steel

2 Flutes

S (Short)
Days to Ship: 18 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	18 Day(s) or more


Brand
Product Series
CAD
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	OSG	UNION TOOL	ASAHI TOOLS	MISUMI	MISUMI	MISUMI	NS TOOL	NS TOOL	NS TOOL	MITSUBISHI HITACHI TOOL	NS TOOL	ASAHI TOOLS	DIJET	DIJET	KYOCERA	KYOWA SEIKO	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Carbide square end mill, 2-flute / 2D Flute Length (short) model	Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS	Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS	Solid Spiral End Mill SSM2000 Type	Carbide Center V End Mill KSV-2	Carbide Long Blade End Mill KSEL-2	Carbide square end mill, 2-flute / 3D Flute Length (regular) model	Carbide square end mill, 4-flute / 4D Flute Length (long) model	2-flute short type MG-EDS [Alterations Available]	CPR 2-Flute Long Neck Square for Resin Machining [Alteration Supported Product]	TAL2, 2-flute, Alumik 2000 End Mill AH10	Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model	ALZ345 High-Efficiency Heavy Cutting End Mill for Aluminum	NX-30 Lead 30 End Mill	NX-35 Lead 35 End Mill	End Mill for Carbide Aluminum AES2□□□ [Alteration Supported Product]	PCD square end mill PCDSE	SLE2 Long Shank Slotting End Mill G2	Solid End Mill for Aluminum Machining (Long Shank) (Slim Shank) (with Minute Corner Radius) AL-SEES3-LS-R02 Type	Spiral Cut End Mill SPC type	Unequal Flute Spacing / Wiper Cutting Edge Type for Aluminum and Nonferrous Metals 3NESM	End Mill with 2 Carbide Flutes and Corner C Face KSC-2	Carbide Miniature End Mill KMSE‐2	Carbide square end mill, 4-flute / 2D Flute Length (short) model	Carbide square end mill, 4-flute / 3D Flute Length (regular) model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model	Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type	Carbide Square End Mill for Aluminum Machining / 2-Flute / 45° Spiral / 3D Blade Length (Regular) Type	Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model	Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model	Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model	Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model	Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model	Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model	Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model	Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model	Carbide Long Neck Square End Mill for Resin Machining, 2-Flute / Stub, Long Neck Model	Carbide Blade Neck Relief End Mill, 2-Flute / Short Model
CAD
Days to Ship	12 Day(s) or more	1 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	11 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	18 Day(s) or more
Specifications	Non-Coated General Steel 2 Flutes S (Short)						Non-Coated General Steel 2 Flutes R (Regular)	Non-Coated General Steel 4 Flutes L (Long)				Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated General Steel	Non-Coated General Steel 2 Flutes												Non-Coated General Steel 4 Flutes S (Short)	Non-Coated General Steel 4 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Aluminum 2 Flutes S (Short)	Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes L (Long)	Non-Coated Aluminum 2 Flutes EXL (Extra Long)	Non-Coated Aluminum 3 Flutes S (Short)	Non-Coated Aluminum 4 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Aluminum 3 Flutes B (Stub)	Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated Copper 2 Flutes R (Regular)	Non-Coated Graphite 2 Flutes L (Long)	Non-Coated Graphite 4 Flutes L (Long)	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes EXL (Extra Long)	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes B (Stub)	General Steel 2 Flutes S (Short)
Blade diameter (D)(φ)	0.2 ～ 12	1 ～ 20	3 ～ 20	2	0.5 ～ 6	0.1 ～ 6	0.2 ～ 12	1 ～ 12	1 ～ 25	0.5 ～ 6	14 ～ 50	0.5 ～ 20	2 ～ 20	3.15 ～ 19.99	1 ～ 12	0.5 ～ 12	0.5 ～ 12	1 ～ 20	0.1 ～ 1	3 ～ 30	6 ～ 22	15 ～ 38	3 ～ 20	1 ～ 6	0.1 ～ 3	1 ～ 20	2 ～ 20	1 ～ 12	0.5 ～ 20	0.5 ～ 20	3 ～ 12	3 ～ 12	1 ～ 12	0.5 ～ 12	5 ～ 22	6.2 ～ 16.2	5 ～ 20	0.5 ～ 20	1 ～ 12	2 ～ 12	0.3 ～ 16	0.3 ～ 12	1 ～ 10	0.3 ～ 6	6 ～ 12
Blade length (ℓ)(mm)	0.4 ～ 24	2.5 ～ 38	8 ～ 38	6	1 ～ 12	0.3 ～ 60	0.6 ～ 36	4 ～ 48	2.5 ～ 45	1 ～ 12	25 ～ 60	1.5 ～ 60	4 ～ 60	3.5 ～ 48	1.5 ～ 18	1 ～ 24	1.5 ～ 36	2.5 ～ 40	0.02 ～ 0.2	8 ～ 21	9 ～ 33	26 ～ 55	12 ～ 38	3 ～ 13	0.2 ～ 8	2 ～ 40	5 ～ 60	1.5 ～ 18	1 ～ 40	1.5 ～ 60	5 ～ 48	15 ～ 60	2 ～ 24	1.5 ～ 28	9 ～ 33	9 ～ 24	15 ～ 45	1.5 ～ 60	5 ～ 60	10 ～ 60	0.9 ～ 48	1.5 ～ 48	3 ～ 20	0.6 ～ 15	-
Underneck length (ℓ1)(mm)	17 ～ 45	-	-	-	-	-	23 ～ 55	29 ～ 70	-	2 ～ 63	-	23 ～ 92	-	-	3 ～ 36	-	-	-	0.1 ～ 1	15 ～ 41	-	-	-	-	-	17 ～ 73	23 ～ 92	3 ～ 36	17 ～ 73	23 ～ 92	29 ～ 70	-	17 ～ 50	22 ～ 50	-	-	20 ～ 70	-	10 ～ 85	20 ～ 85	-	-	-	2.5 ～ 52	-
Shank diameter (d)(mm)	3 ～ 12	4 ～ 20	6 ～ 20	4	3 ～ 6	3 ～ 6	3 ～ 12	4 ～ 12	4 ～ 25	3 ～ 6	16 ～ 32	4 ～ 20	4 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	4	10 ～ 32	4 ～ 20	16 ～ 32	6 ～ 20	4 ～ 6	3	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 20	4 ～ 20	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	3 ～ 16	3 ～ 12	1 ～ 10	3 ～ 6	6 ～ 12
Number of flutes(sheet)	2	2	3	2	2	2	2	4	2	2	2	3	2 ～ 4	2	3	2	2	2	2 ～ 6	2	3	4 ～ 6	3	2	2	4	4	3	2	2	2	2	3	4	3	3	3	2	2	4	2	2	2	2	2
Overall Length (L)(mm)	35 ～ 75	40 ～ 105	50 ～ 105	40	40 ～ 70	40 ～ 100	40 ～ 85	45 ～ 100	40 ～ 120	38 ～ 120	95 ～ 160	40 ～ 130	40 ～ 130	40 ～ 105	45 ～ 80	40 ～ 75	40 ～ 85	40 ～ 105	48	100 ～ 220	80 ～ 200	84 ～ 123	50 ～ 104	40 ～ 50	40	40 ～ 110	45 ～ 130	40 ～ 80	40 ～ 110	40 ～ 130	60 ～ 100	60 ～ 130	40 ～ 80	40 ～ 80	80 ～ 200	80 ～ 180	57 ～ 100	50 ～ 130	75 ～ 200	75 ～ 200	45 ～ 110	40 ～ 110	65 ～ 180	50 ～ 80	45 ～ 75
work material	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[○]	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○]	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	No torsion	No torsion	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Groove	Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove / Countersinking	Plane / Side / Groove	Plane / Countersinking	Side / Groove	Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade tip shape	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	-	-	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	-	Micro R	C plane	-	C plane	Sharp Edge	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	With Lead	Sharp Edge	Micro R	Micro R	Micro R	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	-	Sharp Edge	Sharp Edge	With Lead
Type	Square	Square	Square	Square	-	Square	Square	Square	Square	Long-Neck Square	Square	Square	Square	Square	Square	Square	Square	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Roughing	Square	Square	Square	Square	Square	Square	Long-Neck Square	Square

1
2
3
4
5
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6H
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8H
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10H
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12H
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 12～12.9
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.58
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57～57.5
  - 57
  - 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 62
- 63
- 64
- 65
- 66
- 67
- 70
- 72
- 75
- 76
- 78
- 80
- 82
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 115
- 120
- 125
- 130
- 150
- 200
[5-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11～11.25
  - 11
  - 11.25
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15～15.75
  - 15
  - 15.75
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19～19.6
  - 19
  - 19.6
- 20
- 21
- 22
- 23
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35～35.3
  - 35
  - 35.3
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 57
- 60
- 62
- 63
- 64
- 65
- 66
- 70
- 74
- 75
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 108
- 120
- 125
- 130
- 140
- 150
- 200
[17-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

22

24

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

Outer Diameter 6/Bottom Blade 3

7

8

Outer Diameter 8/Bottom Blade 4

10

Outer Diameter 10/Bottom Blade 5

12

14

Outer Diameter 14/Bottom Blade 7

16

Outer Diameter 16/Bottom Blade 8

Bur End
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

41

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

64

65

66

67

68

69

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

98

99

100

104

105

107

108

109

110

111

112

113

114

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

185

190

200

210

215

220

225

230

240

250

260

265

270

280

300

310

320

350

800
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Variable lead
- IKOU
Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear