(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Square End Mills (Carbide)（work material：Resin）
| Days to Ship |
|
|---|
-
Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS
OSG
For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.
Days to Ship: 1 Day(s) or more -
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS
OSG
With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.
Days to Ship: 16 Day(s) or more -
TAL2, 2-flute, Alumik 2000 End Mill AH10
ASAHI TOOLS
Rake surface, peripheral blade and bottom blade are mirror polished with #2000 which suppresses built-up edges. The rake angle, clearance angle, and sharpness have been improved compared to the conventional end mill.
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model
MISUMI
Achieves high-efficiency machining with the 3-geometry that's emphasized the rigidity!
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
NS TOOL
The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing
Days to Ship: 10 Day(s) or more -
NS TOOL
The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining
Days to Ship: 10 Day(s) or more -
MUGEN-COATING 4-Flute End Mill MSE445
NS TOOL
Adopts a unique Infinity coating for 4-flute end mill. Cutting Resistance Reduced Compared to 30° Torsion
Days to Ship: 16 Day(s) or more -
SLE2 Long Shank Slotting End Mill G2
ASAHI TOOLS
φ3 to φ7 are tip brazing types. Uses a long shank to increase the versatility of the protruding length.
Days to Ship: 16 Day(s) or more -
Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX
7 LEADERS
[Features]
· 3.0D blade length type.
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles.
· Excellent lubricity and heat resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
· Enables groove cutting (ap 0.5D to 1.0D) as is after machining in the Z axis direction (ap 0.5D to 1.0D).Days to Ship: 12 Day(s) or more -
Carbide 4-Flute Variable Split Variable Lead End Mill 43°/48° E144X
7 LEADERS
[Features]
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.
· It supports high-speed side cutting.Days to Ship: 10 Day(s) or more -
End Mill with 2 Carbide Flutes 35° E122X
7 LEADERS
[Features]
· 2-flute general-purpose end mill.
· A 0.1 increment outer diameter series.
· Supports a wide range of machining.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.Days to Ship: 10 Day(s) or more -
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 16 Day(s) or more -
Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining
- Volume Discount
- DIA
- Aluminum
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model
MISUMI
Demonstrates the tremendous durability and finishing precision in aluminum machining
- Volume Discount
- DIA
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model
MISUMI
Short flute length that suppresses chattering
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- S (Short)
Days to Ship: 16 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model
MISUMI
The cutting performance of aluminum has been improved by the combination of sharp edge and DLC coating
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
4D flute length type that's ideal for deep engraving
- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- L (Long)
Days to Ship: 16 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model
MISUMI
The unique tip pocket shape improves the discharging of chips
- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model
MISUMI
The durability is enhanced with the adoption of the 4-geometry
- Volume Discount
- DLC
- Aluminum
- 4 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model
MISUMI
A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type
MISUMI
A non-coated type that does not impair the sharpness of the blade
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- S (Short)
Days to Ship: 16 Day(s) or more -
MISUMI
Affordable, non-coated type of the Aluminum Processing Series
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model
MISUMI
The large rake angle prevents the built-up edge that's unique to aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- L (Long)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model
MISUMI
Achieves the standing-wall machining of aluminum in the first shot! flute length of 5 Times the Blade Diameter
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- EXL (Extra Long)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model
MISUMI
3-flute structure that's excellent in discharging chips
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- S (Short)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model
MISUMI
[Features]
·Uses a sharp cutting edge to suppress the built-up edge unique to aluminum
·The unique chip pocket shape enables grooving with a depth of cut equivalent to that of a 2-flute cutting tool.
·Can be re-polished. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.- Volume Discount
- Non-Coated
- Aluminum
- 4 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
2 types that are recommended in the standing-wall machining of aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model
MISUMI
2 types that are recommended in the standing-wall machining of aluminum
- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Days to Ship: 16 Day(s) or more -
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model
MISUMI
The CrN coating with excellent lubricity exhibits power in copper electrode processing
- Volume Discount
- CrN
- Copper
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model
MISUMI
A non-coated type that has achieved both the cost reduction and processing performance
- Volume Discount
- Non-Coated
- Copper
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price
- Volume Discount
- DIA
- Graphite
- 2 Flutes
- L (Long)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model
MISUMI
[Features]
·Uncoated product with excellent cost-effectiveness
·Deep digging is possible due to long flute length
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- Graphite
- 2 Flutes
- L (Long)
Days to Ship: 16 Day(s) or more -
Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price
- Volume Discount
- DIA
- Graphite
- 4 Flutes
- L (Long)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model
MISUMI
[Features]
·Uncoated product with excellent cost-effectiveness
·Deep digging is possible due to long flute length
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- Non-Coated
- Graphite
- 4 Flutes
- L (Long)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model
MISUMI
The cutting edge with an emphasis on sharpness is ideal for resin machining
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model
MISUMI
Extra long type for resin that's capable of deep processing in the first shot
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- EXL (Extra Long)
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model
MISUMI
Available in 10 sizes including the long shank type
- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Days to Ship: 16 Day(s) or more -
(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving
- Volume Discount
- XAL
- General Steel
- 2 Flutes
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type
MISUMI
Aluminum processing end mills that have pursued the machined surface accuracy are available at ultra-low prices
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Days to Ship: 16 Day(s) or more -
MISUMI
Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 3 times the outer diameter is available at an ultra low price
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Days to Ship: 16 Day(s) or more -
Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model
MISUMI
Achieves standing-wall machining with high surface accuracy in a single shot! The flute length of 5 times the outer diameter is available at an ultra low price
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Days to Ship: 16 Day(s) or more -
DIA Coated 2 Flutes Short_DIA-EDS
OSG
End mill with ultra-microcrystalline diamond coating. The high silicon aluminum alloy material and graphite treatment provides outstanding tool life.
Days to Ship: 16 Day(s) or more -
Carbide End Mills DLC Coated 2 Flutes Short_DLC-EDS
OSG
End mill featuring an original ultra-smooth new DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.
Days to Ship: 16 Day(s) or more -
OSG
The amount of tool protrusion can be set to the minimum in the two-surface clamped HSK holder. Ideal for high-speed mass production of copper electrodes.
Days to Ship: 16 Day(s) or more -
OSG
The highly lubricating CrN coating exhibits excellent performance when machining copper alloy, aluminum alloy, and plastic. Ideal for fine processing of copper electrodes and IT parts made of copper alloy.
Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | ASAHI TOOLS | MISUMI | NS TOOL | NS TOOL | NS TOOL | ASAHI TOOLS | 7 LEADERS | 7 LEADERS | 7 LEADERS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG |
| Product Series | Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS | Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS | Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model | Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX | Carbide 4-Flute Variable Split Variable Lead End Mill 43°/48° E144X | (Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / Regular Model | Diamond Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Regular Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 2D Flute Length (Short) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 3D Flute Length (Regular) Model | DLC Coated Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub Model | Carbide Square End Mill for Aluminum Machining/2-Flute/45° Spiral/Flute Length 2D (Short) Type | Carbide Square End Mill for Aluminum Machining, 2-Flute / 4D Flute Length (Long) Model | Carbide Square End Mill for Aluminum Machining, 2-Flute / Extra Long Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model | Carbide Square End Mill for Aluminum Machining, 4-Flute / Regular Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model | Carbide Square End Mill for Copper Electrode Machining, 2-Flute / Regular Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model | Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model | Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model | Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model | Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model | Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model | (Economy series) XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | Carbide Square End Mill for Aluminum Machining/2-Flute/55° Spiral/Flute Length 2D (Short) Type | Carbide Square End Mill for Aluminum Machining, 2-Flute / 5D Flute Length (Extra Long) Model | ||||||||||||
| Days to Ship | 1 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 20 | 3 ～ 20 | 14 ～ 50 | 0.5 ～ 20 | 0.5 ～ 12 | 0.5 ～ 12 | 2 ～ 12 | 3 ～ 30 | 1 ～ 20 | 1 ～ 20 | 0.2 ～ 20 | 0.1 ～ 18 | 1 ～ 12 | 1 ～ 12 | 1 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 0.5 ～ 20 | 0.5 ～ 12 | 1 ～ 12 | 0.5 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 | 0.5 ～ 12 | 5 ～ 22 | 6.2 ～ 16.2 | 0.5 ～ 12 | 0.5 ～ 20 | 1 ～ 12 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 0.3 ～ 16 | 0.3 ～ 12 | 1 ～ 10 | 0.5 ～ 5.5 | 0.5 ～ 20 | 0.5 ～ 20 | 3 ～ 12 | 0.5 ～ 12 | 0.5 ～ 12 | 1 ～ 12 | 0.5 ～ 3 |
| Blade length (ℓ)(mm) | 2.5 ～ 38 | 8 ～ 38 | 25 ～ 60 | 1.5 ～ 60 | 1 ～ 24 | 1.5 ～ 36 | 5 ～ 30 | 8 ～ 21 | 3 ～ 60 | 3 ～ 50 | 0.5 ～ 38 | 0.3 ～ 54 | 3 ～ 36 | 3 ～ 36 | 2 ～ 40 | 1.5 ～ 60 | 5 ～ 48 | 1.5 ～ 60 | 1.5 ～ 28 | 1.5 ～ 18 | 1 ～ 40 | 1.5 ～ 60 | 5 ～ 48 | 15 ～ 60 | 2 ～ 24 | 1.5 ～ 28 | 9 ～ 33 | 9 ～ 24 | 1.5 ～ 36 | 1.5 ～ 60 | 5 ～ 60 | 5 ～ 60 | 10 ～ 60 | 10 ～ 60 | 0.9 ～ 48 | 1.5 ～ 48 | 3 ～ 20 | 2 ～ 22 | 1 ～ 40 | 1.5 ～ 60 | 15 ～ 60 | 1 ～ 26 | 1 ～ 24 | 1.5 ～ 18 | 1.5 ～ 8 |
| Underneck length (ℓ1)(mm) | - | - | - | 23 ～ 92 | - | - | - | 15 ～ 41 | - | - | - | - | - | - | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 | 23 ～ 92 | 22 ～ 50 | 3 ～ 36 | 17 ～ 73 | 23 ～ 92 | 29 ～ 70 | - | 17 ～ 50 | 22 ～ 50 | - | - | - | - | 10 ～ 85 | 10 ～ 85 | 20 ～ 85 | 20 ～ 85 | - | - | - | - | - | - | - | - | - | 2.5 ～ 30 | - |
| Shank diameter (d)(mm) | 4 ～ 20 | 6 ～ 20 | 16 ～ 32 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 10 ～ 32 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 | 3 ～ 16 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 6 ～ 16 | 4 ～ 12 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 16 | 3 ～ 12 | 1 ～ 10 | 4 ～ 6 | 4 ～ 20 | 4 ～ 20 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 3 |
| Number of flutes(sheet) | 2 | 3 | 2 | 3 | 2 | 2 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 3 | 2 | 2 | 2 | 3 | 4 | 3 | 2 | 2 | 2 | 2 | 3 | 4 | 3 | 3 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Overall Length (L)(mm) | 40 ～ 105 | 50 ～ 105 | 95 ～ 160 | 40 ～ 130 | 40 ～ 75 | 40 ～ 85 | 45 ～ 80 | 100 ～ 220 | 50 ～ 120 | 50 ～ 100 | 50 ～ 100 | 40 ～ 110 | 40 ～ 80 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 100 | 40 ～ 130 | 40 ～ 80 | 40 ～ 80 | 40 ～ 110 | 40 ～ 130 | 60 ～ 100 | 60 ～ 130 | 40 ～ 80 | 40 ～ 80 | 80 ～ 200 | 80 ～ 180 | 50 ～ 90 | 50 ～ 130 | 75 ～ 200 | 75 ～ 200 | 75 ～ 200 | 75 ～ 200 | 45 ～ 110 | 40 ～ 110 | 65 ～ 180 | 45 ～ 60 | 40 ～ 110 | 40 ～ 130 | 60 ～ 130 | 40 ～ 75 | 40 ～ 75 | 50 ～ 80 | 40 |
| work material | Resin[○] | Resin[○] | Resin[◎] | Resin[○] | Resin[◎] | Resin[◎] | Resin[◎] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[◎] | Resin[◎] | Resin[◎] | Resin[○] | Resin[○] | Resin[○] | Resin[○] | Resin[◎] | Resin[◎] | Resin[◎] | Resin[◎] |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | No torsion | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | Non-Coated | - | - | - | For General Steels (AlCrN, etc.) | Dia Coat | Dia Coat | DLC | DLC | DLC | DLC | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | CrN | Non-Coated | Dia Coat | Non-Coated | Dia Coat | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | Non-Coated | Non-Coated | Dia Coat | DLC | CrN | CrN |
| Blade tip shape | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead | With Lead | - | With Lead | With Lead | With Lead | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | Sharp Edge | Micro R | Micro R | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | - | Sharp Edge | With Lead | - | - | - | With Lead | With Lead | With Lead | With Lead |
| Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.8
-
29～29.7
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
-
30～30.9
- 30
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.7
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
-
36～36.8
- 36
- 36.4
- 36.5
- 36.8
-
37～37.6
- 37
- 37.2
- 37.5
- 37.6
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.6
- 39
- 39.2
- 39.5
- 39.6
-
40～40.8
- 40
- 40.4
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.5
- 41.6
-
42～42.8
- 42
- 42.4
- 42.5
- 42.8
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.5
- 46.8
-
47～47.6
- 47
- 47.2
- 47.5
- 47.6
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.5
- 50
- 50.5
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57.5
-
58～58.5
- 58
- 58.5
-
59～59.5
- 59
- 59.5
-
60
-
63
-
64
-
65
-
67
-
70
-
75
-
80
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
120
-
130
-
150
-
200
[5-60/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Narrow search by specifying Manufacturer
-
- NS TOOL (54)
- ASAHI TOOLS (17)
- 7 LEADERS (12)
- OSG (12)
- ATOM (5)
- DIJET (2)
- GUHRING (2)
- KYOWA SEIKO (2)
- VAN HOORN (1)
- WIDIN (0)
- PROCHI (0)
- ISCAR (0)
- OMIKOGYO (0)
- Poulten&Graf (0)
- TAIYO-TOOL (0)
- OKAZAKI SEIKO (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- SANKO MFG (0)
- GCT (0)
- MITSUBISHI HITACHI TOOL (0)
- MAPAL (0)
- NACHI(FUJIKOSHI) (0)
- TOYO DRILL (0)
- SANDVIK (0)
- KYOCERA (0)
- EIKOSHA (0)
- THE CUT (0)
- UNION TOOL (0)
CAD
-
- 2D
- 3D
Related Categories to Square End Mills (Carbide)
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy