(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（Torsion Angle (θ)：Standard torsion (30-40°)）

319 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less

1
2
3
4
5
Next >>

(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

MISUMI

Stub flute length items that are ideal for grooving are available at incredibly low prices

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 4D GSX4C-4D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The Misumi's original fine intermediate flute length is available at a reasonable price

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
Carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications

Volume Discount

Non-Coated

General Steel

2 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
GS MILL Slot GSSLT

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.

Days to Ship: 16 Day(s) or more
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model

MISUMI

Popular sizes that support deeper side milling are available in XAL Series

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
GS MILL 4-Flute Blade 4GS

NACHI(FUJIKOSHI)

Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.

Days to Ship: 16 Day(s) or more
Solid Spiral End Mill SSM2000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Work Material: General Steel/Cast Iron/Aluminum
Coating: Uncoated
Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.) 2
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Days to Ship: 16 Day(s) or more
Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS

OSG

For copper and aluminum alloys. Good sharpness, and a special blade shape for preventing chatter and vibrations that allows a good finished surface to be achieved.

Days to Ship: 1 Day(s) or more
Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS

OSG

With a wide chip pocket, which has been designed considering the sharpness and chip discharge, it realizes high efficiency machining of grooves and side faces.

Days to Ship: 16 Day(s) or more
Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN

MITSUBISHI HITACHI TOOL

[Notice] Improvements of the cutting edge and neck shape suppress sagging and have achieved high-precision machining. The use of PN coating enables even longer lifespan of machining.

Days to Ship: 12 Day(s) or more
Epoch SUS Multi Under Head 5Dc EPSM4□□□-□□□.□-PN

MITSUBISHI HITACHI TOOL

Compatible with from rough processing to finishing processing of stainless steel, carbon steel, alloy steel, etc.

Days to Ship: 12 Day(s) or more
Epoch Panacea Square, 4-Flute HGOS4□□□-PN

MITSUBISHI HITACHI TOOL

[Features]
· PN coating with phenomenal adhesion resistance and abrasion resistance.
· Enables machining of a wide range of work materials.

Days to Ship: 12 Day(s)
Carbide square end mill, 2-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that produces high-quality finish supports a wide range of machining areas

Volume Discount

Non-Coated

General Steel

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
Carbide square end mill, 4-flute / 4D Flute Length (long) model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated

General Steel

4 Flutes

L (Long)
Days to Ship: 10 Day(s) or more
X's Mill Geo Medium 4GEOM

NACHI(FUJIKOSHI)

Supports a wide range of applications from raw materials to high hardness steel.

Days to Ship: 16 Day(s) or more
X's Mill Geo Long SL4GEO

NACHI(FUJIKOSHI)

Suitable for side processing of wide side surfaces and deep positions.

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS

OSG

[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.

Days to Ship: Same day or more
NX-30 Lead 30 End Mill

NS TOOL

The blade length is 2x the blade diameter and the torsion angle is 30°. Capable of universal cutting from roughing to finishing

Days to Ship: 10 Day(s) or more
Epoch SUS Multi, Regular Length EPSM4□□□-PN [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Continuous high-efficiency machining from hole machining to groove cutting is possible. Ideal for thin plates and small machines with weak clamping force.

Days to Ship: 12 Day(s) or more
TAL2, 2-flute, Alumik 2000 End Mill AH10

ASAHI TOOLS

Rake surface, peripheral blade and bottom blade are mirror polished with #2000 which suppresses built-up edges. The rake angle, clearance angle, and sharpness have been improved compared to the conventional end mill.

Days to Ship: 16 Day(s) or more
TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Flute length is 2.5 times the cutting diameter between short and regular flutes
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

SR
Days to Ship: 10 Day(s) or more
Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model

MISUMI

The premium diamond coated products are available at the industry's lowest price

Volume Discount

DIA

Graphite

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 10 Day(s) or more
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

MISUMI

The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length

Volume Discount

Non-Coated

General Steel

2 Flutes
Days to Ship: 10 Day(s) or more
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 10 Day(s) or more
GS MILL 2-Flute Blade 2GS

NACHI(FUJIKOSHI)

Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
X's Mill Geo 4XSGEO

NACHI(FUJIKOSHI)

Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.

Days to Ship: 11 Day(s) or more
Anchor V 2-Flute 2CE

NACHI(FUJIKOSHI)

General purpose carbide end mill. Suitable for grooving.

Days to Ship: 16 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

OSG

General purpose type 2-flute ultra-long blade end mill with FX coating for excellent heat resistance.

Days to Ship: 16 Day(s) or more
2-flute short type MG-EDS [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

[Specifications]
·Blade diameters of 6 to 12 mm are sharp, and 13 to 25 mm are sharp.

Days to Ship: 16 Day(s) or more
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS

OSG

Heavy duty type 4-flute end mill with reinforced bottom blade corner. Capable of high-speed and high-feed cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.

Days to Ship: 16 Day(s) or more
Regular Grain Carbide End Mills 2 Flutes Long for Graphite_GF-EDL

OSG

Adopts carbide alloy as the base material for extremely excellent wear resistance. Realizes a longer service life with graphite machining.

Days to Ship: 16 Day(s) or more
Epoch, Power Mill Long Flute Length EPPL4□□□ [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

Enables high-precision machining even for deep cutting.

Days to Ship: 12 Day(s)
Aurora Coat, Square End Mill ASM2000DL

SUMITOMO ELECTRIC HARDMETAL

The ultra-smooth aurora coating has low welding and an excellent finish. Since the cutting resistance is low, it enables high feed cutting and low rigidity workpiece processing.

Days to Ship: 16 Day(s) or more
All Purpose Square End Mill Long 4-Flute 3023

GUHRING

Suitable for side wall machining at deep positions, as well as for wide side finishing.

Days to Ship: 16 Day(s) or more
Focus on Accuracy / Finished Surface 4FESM

KYOCERA

[Features]
A solid end mill suitable for general steel, stainless steel, and other workpieces, 4 flutes.
The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
It can perform drilling and chamfer at the same time.
[Applications]
Suitable for finishing of general steel, stainless steel, aluminum, etc.

Days to Ship: 8 Day(s) or more
Unequal Flute Spacing / Wiper Cutting Edge Type for Aluminum and Nonferrous Metals 3NESM

KYOCERA

The base blade has a wiper cutting edge that improves the surface quality of the base.

Days to Ship: 16 Day(s) or more
End Mill with 2 Carbide Flutes and Corner C Face KSC-2

KYOWA SEIKO

[Applications]It can be used for flat surface machining, side machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
Carbide Miniature End Mill KMSE‐2

KYOWA SEIKO

[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX

7 LEADERS

[Features]
· 3.0D blade length type.
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles.
· Excellent lubricity and heat resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
· Enables groove cutting (ap 0.5D to 1.0D) as is after machining in the Z axis direction (ap 0.5D to 1.0D).

Days to Ship: 12 Day(s) or more
End Mill with 2 Carbide Flutes 35° E122X

7 LEADERS

[Features]
· 2-flute general-purpose end mill.
· A 0.1 increment outer diameter series.
· Supports a wide range of machining.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.

Days to Ship: 9 Day(s) or more
(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

The price of the low-cost classic XAL Series has been further reduced!

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	Same day or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	NACHI(FUJIKOSHI)	MISUMI	MISUMI	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	OSG	OSG	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NS TOOL	MITSUBISHI HITACHI TOOL	ASAHI TOOLS	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	SUMITOMO ELECTRIC HARDMETAL	GUHRING	KYOCERA	KYOCERA	KYOWA SEIKO	KYOWA SEIKO	7 LEADERS	7 LEADERS	MISUMI
Product Series	(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model	GSX MILL 4-Flute Blade 4D GSX4C-4D	(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model	Carbide square end mill, 2-flute / 2D Flute Length (short) model	GS MILL Slot GSSLT	(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model	GS MILL 4-Flute Blade 4GS	Solid Spiral End Mill SSM2000 Type	Regular Grain Carbide End Mills 2 Flutes Short for Copper & Aluminum Alloys_CA-RG-EDS	Regular Grain Carbide End Mills 3 Flutes Short for Copper and Aluminum Alloys_CA-ETS	Epoch Deep Square (PN Coating), EPDSE2□□□-□□.□-PN	Epoch SUS Multi Under Head 5Dc EPSM4□□□-□□□.□-PN	Epoch Panacea Square, 4-Flute HGOS4□□□-PN	Carbide square end mill, 2-flute / 3D Flute Length (regular) model	Carbide square end mill, 4-flute / 4D Flute Length (long) model	X's Mill Geo Medium 4GEOM	X's Mill Geo Long SL4GEO	Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS	NX-30 Lead 30 End Mill	Epoch SUS Multi, Regular Length EPSM4□□□-PN [Alteration Supported Product]	TAL2, 2-flute, Alumik 2000 End Mill AH10	TSC series carbide square end mill, 4-flute / 2.5D Flute Length model	Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model	GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D	GS MILL 2-Flute Blade 2GS	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	X's Mill Geo 4XSGEO	Anchor V 2-Flute 2CE	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL	2-flute short type MG-EDS [Alterations Available]	Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS	Regular Grain Carbide End Mills 2 Flutes Long for Graphite_GF-EDL	Epoch, Power Mill Long Flute Length EPPL4□□□ [Alteration Supported Product]	Aurora Coat, Square End Mill ASM2000DL	All Purpose Square End Mill Long 4-Flute 3023	Focus on Accuracy / Finished Surface 4FESM	Unequal Flute Spacing / Wiper Cutting Edge Type for Aluminum and Nonferrous Metals 3NESM	End Mill with 2 Carbide Flutes and Corner C Face KSC-2	Carbide Miniature End Mill KMSE‐2	Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX	End Mill with 2 Carbide Flutes 35° E122X	(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
Days to Ship	16 Day(s) or more	16 Day(s) or more	Same day or more	10 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	1 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s)	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s)	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	9 Day(s) or more	Same day or more
Specifications	XAL General Steel 2 Flutes		XAL General Steel 4 Flutes	Non-Coated General Steel 2 Flutes S (Short)		XAL General Steel 4 Flutes								Non-Coated General Steel 2 Flutes R (Regular)	Non-Coated General Steel 4 Flutes L (Long)							TS General Steel 4 Flutes SR	DIA Graphite 4 Flutes L (Long)	Non-Coated General Steel	Non-Coated General Steel 2 Flutes																				XAL General Steel 2 Flutes
Blade diameter (D)(φ)	0.5 ～ 20	1 ～ 20	1 ～ 20	0.2 ～ 12	3 ～ 16	1 ～ 12	1 ～ 20	2	1 ～ 20	3 ～ 20	0.1 ～ 6	1 ～ 20	1 ～ 20	0.2 ～ 12	1 ～ 12	2 ～ 20	3 ～ 20	1 ～ 30	0.5 ～ 12	1 ～ 20	14 ～ 50	1 ～ 16	2 ～ 12	2 ～ 20	3.15 ～ 19.99	1 ～ 20	0.2 ～ 20	1 ～ 20	1.1 ～ 32	1 ～ 20	3 ～ 30	1 ～ 25	3 ～ 25	3 ～ 12	2 ～ 12	10 ～ 20	2 ～ 5	3 ～ 20	1 ～ 16	3 ～ 20	1 ～ 6	0.1 ～ 3	1 ～ 20	0.2 ～ 20	0.1 ～ 20
Blade length (ℓ)(mm)	0.75 ～ 30	4 ～ 80	3 ～ 60	0.4 ～ 24	8 ～ 32	4 ～ 48	2.5 ～ 38	6	2.5 ～ 38	8 ～ 38	0.15 ～ 9	1.5 ～ 30	2.5 ～ 40	0.6 ～ 36	4 ～ 48	10 ～ 56	18 ～ 75	2.5 ～ 45	1 ～ 24	2.5 ～ 50	25 ～ 60	2.5 ～ 40	10 ～ 60	3 ～ 60	3.5 ～ 48	2.5 ～ 50	0.4 ～ 38	1.5 ～ 30	6 ～ 70	3 ～ 38	20 ～ 112	2.5 ～ 45	12 ～ 67	4.5 ～ 18	20 ～ 130	45 ～ 75	6 ～ 15	-	2.5 ～ 32	12 ～ 38	3 ～ 13	0.2 ～ 8	3 ～ 60	0.5 ～ 38	0.2 ～ 40
Underneck length (ℓ1)(mm)	-	-	-	17 ～ 45	-	-	-	-	-	-	0.3 ～ 50	5 ～ 100	3 ～ 16	23 ～ 55	29 ～ 70	-	-	-	-	-	-	20 ～ 73	20 ～ 85	-	-	-	-	-	-	-	-	-	-	-	25 ～ 80	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 20	4 ～ 20	4 ～ 20	3 ～ 12	6 ～ 16	4 ～ 12	3 ～ 20	4	4 ～ 20	6 ～ 20	4 ～ 6	6 ～ 20	4 ～ 20	3 ～ 12	4 ～ 12	4 ～ 20	6 ～ 20	4 ～ 32	4 ～ 12	6 ～ 20	16 ～ 32	4 ～ 16	4 ～ 12	4 ～ 20	6 ～ 20	4 ～ 20	3 ～ 20	4 ～ 20	4 ～ 32	4 ～ 20	6 ～ 32	4 ～ 25	6 ～ 25	6 ～ 12	6 ～ 12	10 ～ 20	4 ～ 6	3 ～ 20	4 ～ 16	6 ～ 20	4 ～ 6	3	4 ～ 20	4 ～ 20	3 ～ 20
Number of flutes(sheet)	2	4	4	2	3	4	4	2	2	3	2	4	4	2	4	4	4	4	2	4	2	4	4	2 ～ 4	2	4	2	4	4	2	2	2	2	4	2	4	2	4	4	3	2	2	4	2	2
Overall Length (L)(mm)	40 ～ 110	40 ～ 140	45 ～ 130	35 ～ 75	50 ～ 115	45 ～ 100	38 ～ 100	40	40 ～ 105	50 ～ 105	45 ～ 100	68 ～ 155	40 ～ 125	40 ～ 85	45 ～ 100	50 ～ 125	60 ～ 155	40 ～ 125	40 ～ 75	56 ～ 125	95 ～ 160	45 ～ 105	75 ～ 200	40 ～ 130	40 ～ 105	40 ～ 100	38 ～ 100	40 ～ 100	50 ～ 175	50 ～ 100	60 ～ 225	40 ～ 120	50 ～ 140	50 ～ 75	100 ～ 200	100 ～ 155	40 ～ 50	75 ～ 150	45 ～ 90	50 ～ 104	40 ～ 50	40	50 ～ 120	50 ～ 100	40 ～ 110
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Cast Iron[○] / Aluminum[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Graphite[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎]	-	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Side / Groove / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Side	Groove	-	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts
Coating	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	Dia Coat	For High Hardness (Silicon Group) / Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	-	TiAlN	Non-Coated	Non-Coated	TiAlN	Non-Coated	TiAlN	DLC	-	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	Non-Coated	-	-	For General Steels (AlCrN, etc.)
Blade tip shape	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge / With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	Sharp Edge	-	Sharp Edge	-	C plane	Sharp Edge	With Lead	With Lead	Sharp Edge / With Lead
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

1
2
3
4
5
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

114

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear