(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Multi-Function Square End Mills (Carbide)

123 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 16 Day(s) or Less 17 Day(s) or Less

(Economy series) XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL

General Steel

3 Flutes
Days to Ship: Same day or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: Same day or more
Super One-Cut End Mill DZ-SOCL4 Type

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 12 Day(s)
CoroMill Plura HD, Carbide Solid End Mill (Square center-cut, Hardness: 48 HRC or less)

SANDVIK

[Features]
· Square, Center Cut
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.

Days to Ship: 8 Day(s) or more
Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 8 Day(s) or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

SR
Days to Ship: 10 Day(s) or more
SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

Days to Ship: 10 Day(s) or more
SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

OKAZAKI SEIKO

It is a high-torsion blade that reduces cutting resistance, realizing a finished surface with low tilt.

Days to Ship: 10 Day(s) or more
Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 12 Day(s) or more
MUGEN-Coating Four-flute End Mill

NS TOOL

Days to Ship: 12 Day(s) or more
Two-flute End Mill for Aluminium

NS TOOL

Days to Ship: 8 Day(s) or more
(Economy series) XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

MISUMI

The new "standard" square end mill with 45° spiral is available at an ultra-low price

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 10 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: Same day or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes

SR
Days to Ship: 10 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

L (Long)
Days to Ship: 10 Day(s) or more
TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 10 Day(s) or more
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: Same day or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

L (Long)
Days to Ship: Same day or more
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)

·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: Same day or more
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

MISUMI

Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

Volume Discount

TS

SUS

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

MISUMI

Ideal for the standing-wall finish of stainless steel

Volume Discount

TS

SUS

3 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model

MISUMI

3-flute structure that's excellent in discharging chips

Volume Discount

DLC

Aluminum

3 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

Given the rounded edge on the blade rear end, it suppresses machining streaks

Volume Discount

DLC

Aluminum

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

MISUMI

MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

MISUMI

Introducing a regular type with 45° spiral in the popular XAL Series

Volume Discount
Days to Ship: Same day or more
(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

MISUMI

Introducing a long type with 45° spiral in the popular XAL Series

Volume Discount
Days to Ship: 10 Day(s) or more
VAC Series Carbide 4-Flute Uneven Lead Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Suppresses chattering with unequal lead and unequal flutes
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Stable machining is possible while maintaining finished surface accuracy
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 10 Day(s) or more
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

MISUMI

[Features]
・Adopts unequal leads to suppress chatter and achieve high efficiency machining
・Optimum groove shape realizes smooth chip discharge
・Minimum electrical conductivity
・Can be re-polished.

Volume Discount
Days to Ship: 10 Day(s) or more
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

MISUMI

[Features]
·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy
·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 10 Day(s) or more
HGGCNXS HG Coated Carbide NX Short Blade

SANKO MFG

Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.

Days to Ship: 9 Day(s) or more
HGGCNX HG Coated Carbide NX

SANKO MFG

[Features]
· Newly developed coating and new shape achieve a long life.
· Excellent chip discharge.
· Capable of high-speed machining.
· A new standard considering usability of the blade length is adopted.

Days to Ship: 9 Day(s) or more
SAGCXF SA Coated Carbide for GCX Groove

SANKO MFG

An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.

Days to Ship: 8 Day(s) or more
SAGCX SA Coated 6-Flute Carbide End Mill

SANKO MFG

[Features]
· Excellent rigidity; ideal for high-speed machining.
· Achieves precision finishing with little tilt.

Days to Ship: 8 Day(s) or more
SAGCXL SA Coated Carbide 6-Flute Long Blade

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. Enables a wide range of side machining, due to the long flute length.

[Features]
· SAGCX long blade end mill.
· Machining is possible with a wide range of materials, from raw materials to hardened steel.

Days to Ship: 8 Day(s) or more
SAGCXLS SA Coated Carbide 6-Flute Long Shank

SANKO MFG

Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.

[Features]
· SAGCX long blade, long shank end mill.
· Deep sections can be machined

Days to Ship: 8 Day(s) or more
SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

High torsion type 3-flute endmill for aluminum with sharp corners and a blade for aluminum.

Days to Ship: 10 Day(s) or more
SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated

OKAZAKI SEIKO

A long shank type, it also features neck relief, enabling deep engraving operation.

Days to Ship: 12 Day(s) or more
SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated

OKAZAKI SEIKO

Long high helical endmill for aluminum, 3-flute, pure DLC coating

Days to Ship: 12 Day(s) or more
SEE3 High-Helix End Mill, 3-Flute, Non-Coated

OKAZAKI SEIKO

3-flute type with high-torsion grooves enables everything from rough machining to finishing

Days to Ship: 12 Day(s) or more
SEE4 High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

An end mill with a high-torsion blade that reduces cutting resistance, which can be used for machining non-ferrous materials through to steel.

Days to Ship: 12 Day(s) or more
SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

OKAZAKI SEIKO

End mill with a unique reinforced blade type that enables heavy duty cutting and high speed machining. The OK hard coating enables machining of high-hardness materials

Days to Ship: 12 Day(s) or more
SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

OKAZAKI SEIKO

The high helical groove of the long blade enables a wide range of side milling and machining of deep sections.

Days to Ship: 12 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	12 Day(s)

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	MISUMI	DIJET	SANDVIK	DIJET	MISUMI	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	NS TOOL	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO
Product Series	(Economy series) XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	Super One-Cut End Mill DZ-SOCL4 Type	CoroMill Plura HD, Carbide Solid End Mill (Square center-cut, Hardness: 48 HRC or less)	Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	SAE3D High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)	MUGEN-Coating Four-flute End Mill	Two-flute End Mill for Aluminium	(Economy series) XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / 2D Flute Length (Short) Model	DLC Coated Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	HGGCNXS HG Coated Carbide NX Short Blade	HGGCNX HG Coated Carbide NX	SAGCXF SA Coated Carbide for GCX Groove	SAGCX SA Coated 6-Flute Carbide End Mill	SAGCXL SA Coated Carbide 6-Flute Long Blade	SAGCXLS SA Coated Carbide 6-Flute Long Shank	SAE3 High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3L Long High-Helix End Mill for Aluminum, 3-Flute, Non-Coated	SAE3LD Long High-Helix End Mill for Aluminum, 3-Flute, Pure DLC-Coated	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated
Days to Ship	Same day or more	Same day or more	12 Day(s)	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	8 Day(s) or more	Same day or more	10 Day(s) or more	Same day or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	10 Day(s) or more	Same day or more	Same day or more	Same day or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more
Specifications	XAL General Steel 3 Flutes	TS General Steel 4 Flutes R (Regular)				TS General Steel 4 Flutes SR						XAL General Steel 4 Flutes	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes SR	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes L (Long)	TS General Steel 4 Flutes S (Short)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	DLC Aluminum 3 Flutes S (Short)	DLC Aluminum 3 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	1 ～ 12	1 ～ 20	6 ～ 20	-	3 ～ 22	3 ～ 16	3 ～ 20	3 ～ 25	3 ～ 20	1 ～ 12	0.5 ～ 12	2 ～ 20	1 ～ 12	1 ～ 20	3 ～ 16	1 ～ 20	2 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	2 ～ 20	2 ～ 22	3 ～ 16	3 ～ 12	1 ～ 12	5 ～ 22	3 ～ 12	1 ～ 12	1 ～ 12	2 ～ 20	3 ～ 25	3 ～ 20	5 ～ 20	3 ～ 25	3 ～ 25	3 ～ 32	3 ～ 30	6 ～ 30	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 20	3 ～ 25	3 ～ 20	3 ～ 20
Blade length (ℓ)(mm)	1.5 ～ 26	4 ～ 56	25 ～ 75	-	5 ～ 35	5 ～ 40	10 ～ 45	10 ～ 50	8 ～ 38	2.5 ～ 30	1 ～ 60	5 ～ 38	1.5 ～ 18	3 ～ 38	5 ～ 40	4 ～ 56	5 ～ 75	3.5 ～ 30	1.5 ～ 24	3 ～ 38	5 ～ 75	3.5 ～ 30	7 ～ 35	10.5 ～ 38	2 ～ 24	9 ～ 33	8 ～ 26	4 ～ 48	5 ～ 60	6 ～ 45	8 ～ 38	7 ～ 26	13 ～ 38	10 ～ 62	10 ～ 50	10 ～ 65	15 ～ 100	12 ～ 55	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 45	10 ～ 50	10 ～ 45	15 ～ 80
Underneck length (ℓ1)(mm)	-	26 ～ 92	-	-	-	22 ～ 78	-	-	-	-	-	-	14 ～ 68	18 ～ 73	22 ～ 78	26 ～ 92	30 ～ 112	30 ～ 140	14 ～ 74	18 ～ 72	30 ～ 112	30 ～ 140	-	-	17 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-	15 ～ 80	15 ～ 80	-	-	-	-
Shank diameter (d)(mm)	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 25	5 ～ 20	6 ～ 16	6 ～ 20	6 ～ 25	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	4 ～ 12	4 ～ 12	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	3 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20
Number of flutes(sheet)	3	4	4	4	4	4	3	4	4	-	-	4	3	3	3	3	3	3	4	4	4	4	3	3	3	3	4	4	4	4	4	4	4	3 ～ 4	3 ～ 4	6	6	6	3	3	3	3	4	4	4
Overall Length (L)(mm)	45 ～ 100	60 ～ 130	70 ～ 155	57 ～ 121	80 ～ 220	60 ～ 110	45 ～ 105	45 ～ 120	60 ～ 125	45 ～ 80	45 ～ 110	45 ～ 125	60 ～ 100	60 ～ 110	60 ～ 110	60 ～ 130	60 ～ 150	80 ～ 200	60 ～ 110	60 ～ 110	60 ～ 150	80 ～ 200	60 ～ 105	60 ～ 100	40 ～ 80	80 ～ 200	60 ～ 100	45 ～ 105	45 ～ 105	50 ～ 100	57 ～ 104	54 ～ 92	50 ～ 110	50 ～ 140	50 ～ 140	50 ～ 160	70 ～ 200	80 ～ 200	45 ～ 105	70 ～ 800	70 ～ 800	45 ～ 105	45 ～ 120	45 ～ 105	70 ～ 150
work material	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[◎] / Titanium[○]	general steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	-	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Side	-	Side	Plane / Side / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Side / Groove	-	-	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking
Coating	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	-	TiAlN	For High Hardness (Silicon Group)	DLC	TiAlN	TiAlN	-	-	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	DLC	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	DLC	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	Non-Coated
Blade tip shape	With Lead	Sharp Edge / With Lead	Sharp Edge	-	Sharp Edge	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	-	-	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	C plane	C plane	With Lead	Micro R	With Lead	With Lead	With Lead	-	-	-	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Type	Square	Square	Square	Square	Square	Square	High Helical	High Helical	Square	-	-	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.1～0.95
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12
- 13～13.7
  - 13
  - 13.7
- 14
- 15～15.6
  - 15
  - 15.6
- 16
- 17
- 18
- 19～19.5
  - 19
  - 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
Drawing

Clear

Blade length (ℓ)(mm)
- 0.1～0.9
  - 0.1
  - 0.15
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.7
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.8
  - 3.9
- 4～4.8
  - 4
  - 4.2
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.8
  - 7
  - 7.2
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
  - 9.9
- 10～10.8
  - 10
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12
- 12～12.9
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.4
  - 14.5
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.6
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.8
- 17～17.7
  - 17
  - 17.1
  - 17.2
  - 17.4
  - 17.5
  - 17.6
  - 17.7
- 18～18.8
  - 18
  - 18.4
  - 18.8
- 19～19.6
  - 19
  - 19.2
  - 19.6
- 20～20.8
  - 20
  - 20.4
  - 20.5
  - 20.8
- 21～21.6
  - 21
  - 21.2
  - 21.6
- 22～22.8
  - 22
  - 22.4
  - 22.5
  - 22.8
- 23～23.6
  - 23
  - 23.2
  - 23.6
- 24
- 25
- 26
- 27～27.5
  - 27
  - 27.5
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 44
- 45
- 46
- 47
- 48
- 50
- 52
- 53
- 55
- 56
- 57
- 60
- 62
- 64
- 65
- 66
- 70
- 75
- 76
- 80
- 85
- 100
[5-75/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 9
- 11.25
- 13.5
- 15～15.75
  - 15
  - 15.75
- 16
- 18
- 19.6
- 20
- 24
- 25～25.5
  - 25
  - 25.5
- 26
- 28
- 30
- 32
- 35～35.3
  - 35
  - 35.3
- 36
- 41
- 42
- 45
- 50
- 51
- 52
- 64
- 65
- 70
- 80
- 85
- 100
- 108
- 120
- 140
[14-112/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

17

18

20

25

32
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6
Clear

Overall Length (L)(mm)
35

37

38

40

41

42

45

49

50

53

54

55

57

58

60

63

64

65

66

70

72

73

75

76

80

82

83

84

85

89

90

92

95

100

104

105

110

115

120

121

125

130

135

140

150

155

160

180

200

220

240

250

800
Drawing

Clear