(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Roughing End Mills (Carbide)（work material：general steel）

31 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 12 Day(s) or Less 16 Day(s) or Less 18 Day(s) or Less 19 Day(s) or Less 20 Day(s) or Less 21 Day(s) or Less

XAC series carbide roughing end mill, fine pitch / regular model

MISUMI

Strongly supports the cost reduction of roughing with the limited special price for standard sizes

Volume Discount

TiAlN

General Steel

R (Regular)
Days to Ship: Same day or more
GSX MILL Roughing 2.5D GSXRE-2.5D

NACHI(FUJIKOSHI)

Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.

Days to Ship: 16 Day(s) or more
WX Coated Roughing_WX-RESF

OSG

As the corrugated blade shape reduces cutting power, large cutting depth is possible. Also resilient to chatter, it is possible to improve the efficiency of roughing.

Days to Ship: 12 Day(s) or more
TSC series carbide roughing end mill, fine pitch / short model

MISUMI

[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide roughing end mill, fine pitch / regular model

MISUMI

[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide roughing end mill, fine pitch / long model

MISUMI

[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

L (Long)
Days to Ship: 10 Day(s) or more
TSC series carbide roughing end mill, fine pitch / long regular model

MISUMI

[Features]
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·Long shank type ideal for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

MISUMI

[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

MISUMI

[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

MISUMI

[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

L (Long)
Days to Ship: 10 Day(s) or more
TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

MISUMI

[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·Long shank type ideal for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

R (Regular)
Days to Ship: 10 Day(s) or more
VAC Series Carbide Roughing End Mill

MISUMI

[Features]
・High-speed rotation is possible by adopting a 45° helix.
・Using a fine pitch nick, the surface roughness after processing is also excellent.
・The conductivity is minimal.
《Additional machining》
・Additional neck relief machining can be specified using MISUMI standard tools.
・No need to create drawings. You can order by simply specifying the dimensions using the model number.
・Available starting from 1 piece, ``just the quantity you need when you need it.''
・Delivered on the 3rd day.

Volume Discount
Days to Ship: 16 Day(s) or more
GS MILL Heavy GSHV

NACHI(FUJIKOSHI)

Ideal for rough and medium finishing of materials from steel to stainless steel. High performance machining with BT30 machines is possible with little cutting resistance.

Days to Ship: 16 Day(s) or more
GS MILL Roughing GSRE

NACHI(FUJIKOSHI)

Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel.

Days to Ship: 16 Day(s) or more
Epoch SUS Wave Regular Length EPSW□□□□-PN [Alteration Supported Product]

MITSUBISHI HITACHI TOOL

[Notice] Alteration can be specified. Please select from the "standard / alteration category" of the refinement condition.

[Features]
· Ideal for fine processing of molds.
· A variety of dimensions are available for all types of processing.

Days to Ship: 12 Day(s) or more
FAGCNα, FA Coated Carbide Nα Nick

SANKO MFG

[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· New shape and new surface processing provide excellent chipping resistance and chip discharge.
· A new standard considering usability of the blade length is adopted.

Days to Ship: 16 Day(s) or more
SAGCVα SA Coated Carbide Victory α Nick

SANKO MFG

[Features]
· Machining is possible with a wide range of materials, from raw materials to hardened steel.
· Newly developed nick/cross-section shape provide excellent chipping resistance and chip discharge.

Days to Ship: 16 Day(s) or more
SAGCα SA Coated Carbide α Nick

SANKO MFG

[Features]
· With a unique roughing blade shape, heavy machining and high speed machining are possible

Days to Ship: 16 Day(s) or more
SCT S Cut End Mill MX30

ASAHI TOOLS

JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

Days to Ship: 16 Day(s) or more
SCT Long S-Cut End Mill MX30

ASAHI TOOLS

JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

Days to Ship: 16 Day(s) or more
STN Tornado End Mill MA

ASAHI TOOLS

Ideal for side and groove machining of castings, carbon steel, stainless steel, and hard-to-cut material (up to HRC 65). Capable of radial cutting depth of 1/8 D in semi-finishing and finishing of high-hardness steel.

Days to Ship: 16 Day(s) or more
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat

OKAZAKI SEIKO

Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.

Days to Ship: 10 Day(s) or more
One Cut Rough DZ-OCRS

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 16 Day(s) or more
High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)

KYOCERA

·Roughing corrugated cutting edge
·For coarse machining, the repertoire includes 3, 4, and 5 flutes.
The sine curve cutting edge reduces cutting force.

Days to Ship: 16 Day(s) or more
CoroMill Plura, Carbide Solid End Mill Roughing

SANDVIK

Unique shape exhibits high performance

Days to Ship: 16 Day(s) or more
Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF

OSG

[Features]
· Non-uniform split shape of the base blade and unequal lead shape of the outer peripheral blade achieve "quiet but heavy cutting".
· Work material: General steel, tempered steel, stainless steel, cast iron, copper, aluminum, titanium

Days to Ship: 16 Day(s) or more
SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated

OKAZAKI SEIKO

A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.

Days to Ship: 10 Day(s) or more
SPEED/T 3/4 Flute 40°Roughing

Poulten&Graf

[Features]
· Fine pitch 40° torsion angle is ideal for roughing HRC 45 or below mild steels at a low cost.
· Low cutting depth and long operating life.

Days to Ship: 12 Day(s) or more
GSX MILL VL Roughing 2.5D GSXVLRE4-2.5D

NACHI(FUJIKOSHI)

[Features]
· Unequal division and unequal lead increase fracture resistance in high-speed and high-efficiency processing.

Days to Ship: 16 Day(s) or more
Go-riki Roughing End Mill 4-Flute / OK Coat Premium SRE4GA

OKAZAKI SEIKO

[Features]
· Reduced cutting resistance and enhanced durability thanks to the synergistic effect of its unique vibration damping structure and OK coat

Days to Ship: 12 Day(s) or more
Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4RFE

THE CUT

[Features]
· Outstanding cost performance.
· Capable of machining a wide range of workpieces from raw materials up to alloy steel.
· TiAlN coated for a longer tool life.
· A 4-flute specification with stable machining performance.

Days to Ship: 16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	NACHI(FUJIKOSHI)	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MITSUBISHI HITACHI TOOL	SANKO MFG	SANKO MFG	SANKO MFG	ASAHI TOOLS	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	DIJET	KYOCERA	SANDVIK	OSG	OKAZAKI SEIKO	Poulten&Graf	NACHI(FUJIKOSHI)	OKAZAKI SEIKO	THE CUT
Product Series	XAC series carbide roughing end mill, fine pitch / regular model	GSX MILL Roughing 2.5D GSXRE-2.5D	WX Coated Roughing_WX-RESF	TSC series carbide roughing end mill, fine pitch / short model	TSC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / long model	TSC series carbide roughing end mill, fine pitch / long regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model	TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model	VAC Series Carbide Roughing End Mill	GS MILL Heavy GSHV	GS MILL Roughing GSRE	Epoch SUS Wave Regular Length EPSW□□□□-PN [Alteration Supported Product]	FAGCNα, FA Coated Carbide Nα Nick	SAGCVα SA Coated Carbide Victory α Nick	SAGCα SA Coated Carbide α Nick	SCT S Cut End Mill MX30	SCT Long S-Cut End Mill MX30	STN Tornado End Mill MA	SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat	One Cut Rough DZ-OCRS	High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)	CoroMill Plura, Carbide Solid End Mill Roughing	Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF	SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated	SPEED/T 3/4 Flute 40°Roughing	GSX MILL VL Roughing 2.5D GSXVLRE4-2.5D	Go-riki Roughing End Mill 4-Flute / OK Coat Premium SRE4GA	Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4RFE
Days to Ship	Same day or more	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more
Specifications	TiAlN General Steel R (Regular)			TS General Steel 4 Flutes S (Short)	TS General Steel R (Regular)	TS General Steel 4 Flutes L (Long)	TS General Steel R (Regular)	TS General Steel S (Short)	TS General Steel R (Regular)	TS General Steel L (Long)	TS General Steel R (Regular)
Blade diameter (D)(φ)	6 ～ 20	4 ～ 20	14 ～ 25	5 ～ 20	3 ～ 20	6 ～ 20	5 ～ 20	5 ～ 20	3 ～ 20	6 ～ 20	6 ～ 20	3 ～ 12	6 ～ 20	6 ～ 20	4 ～ 20	3 ～ 25	5 ～ 20	5 ～ 25	20 ～ 40	20 ～ 40	3 ～ 20	5 ～ 25	4 ～ 25	5 ～ 8	6 ～ 20	6 ～ 12H	5 ～ 20	5 ～ 20	4 ～ 20	-	6 ～ 20
Blade length (ℓ)(mm)	16 ～ 38	10 ～ 50	26 ～ 45	10 ～ 38	15 ～ 45	25 ～ 65	15 ～ 45	10 ～ 38	15 ～ 45	25 ～ 65	15 ～ 45	8 ～ 25	13 ～ 38	13 ～ 38	10 ～ 50	10 ～ 62	13 ～ 38	15 ～ 60	40 ～ 80	60 ～ 120	3 ～ 80	12 ～ 45	8 ～ 50	13 ～ 16	9 ～ 38	13 ～ 26	12 ～ 40	13 ～ 45	10 ～ 50	-	15 ～ 50
Underneck length (ℓ1)(mm)	-	-	-	17 ～ 66	20 ～ 92	30 ～ 112	20 ～ 95	17 ～ 72	20 ～ 92	30 ～ 112	20 ～ 95	-	-	-	-	22 ～ 57	18	22 ～ 55	-	-	-	-	-	-	-	-	15 ～ 36	-	-	-	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	12 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	3 ～ 25	6 ～ 20	6 ～ 25	20 ～ 42	20 ～ 42	6 ～ 20	4 ～ 25	6 ～ 25	6 ～ 8	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	-	6 ～ 20
Number of flutes(sheet)	3 ～ 4	4	4 ～ 6	4	3 ～ 4	4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	4	4	3 ～ 4	3 ～ 4	4	4	4	4	4 ～ 8	4	3 ～ 4	3	3 ～ 4	4	3	3 ～ 4	4	4	4
Overall Length (L)(mm)	57 ～ 104	45 ～ 100	85 ～ 120	57 ～ 104	60 ～ 130	100 ～ 150	100 ～ 150	60 ～ 110	60 ～ 130	100 ～ 150	100 ～ 150	50 ～ 75	50 ～ 100	50 ～ 100	56 ～ 125	50 ～ 140	50 ～ 110	60 ～ 140	130 ～ 180	150 ～ 220	45 ～ 140	50 ～ 120	55 ～ 130	57 ～ 63	57 ～ 104	60 ～ 80	50 ～ 105	50 ～ 100	45 ～ 100	-	60 ～ 110
work material	general steel[○]	general steel[◎]	general steel[○/◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[◎]	general steel[◎]	general steel[○]	general steel[○/◎]	general steel[○]	general steel[○]	general steel[○]	general steel[◎]	general steel[○]
Torsion Angle (θ)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	Variable lead	Powerful Torsion (45°-60°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Side / Groove	Plane / Side / Groove	Side / Groove	Plane / Side / Groove	Groove	Plane / Side / Inclined Cuts	Side / Groove	Side / Groove / Plunging (Z feed) / Inclined Cuts	Side / Groove	Plane / Side	Side / Groove
Coating	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	TiN	TiAlN	TiAlN	TiAlN	TiCN	-	TiAlN	-	For General Steels (AlCrN, etc.)	TiAlN	TiAlN
Blade tip shape	C plane	With Lead	C plane	Micro R	Micro R	Micro R	Micro R	C plane	C plane	C plane	C plane	-	With Lead	With Lead	With Lead	C plane	C plane	C plane	C plane	C plane	With Lead	C plane	-	-	-	C plane	-	-	C plane	-	-
Type	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.7
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6H
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8H
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.5
  - 10
  - 10H
  - 10.5
- 11～11.5
  - 11
  - 11.5
- 12～12H
  - 12
  - 12H
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 35
- 40
Drawing

Clear

Blade length (ℓ)(mm)
- 0.1～0.9
  - 0.1
  - 0.15
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.7
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.8
  - 3.9
- 4～4.8
  - 4
  - 4.2
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.9
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.8
  - 7
  - 7.2
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.6
  - 9.8
  - 9.9
- 10～10.8
  - 10
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.9
  - 12
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.4
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.6
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.8
- 17～17.7
  - 17
  - 17.1
  - 17.2
  - 17.4
  - 17.5
  - 17.6
  - 17.7
- 18～18.8
  - 18
  - 18.4
  - 18.8
- 19～19.6
  - 19
  - 19.2
  - 19.6
- 20～20.8
  - 20
  - 20.4
  - 20.5
  - 20.8
- 21～21.6
  - 21
  - 21.2
  - 21.6
- 22～22.8
  - 22
  - 22.4
  - 22.5
  - 22.8
- 23～23.6
  - 23
  - 23.2
  - 23.6
- 24
- 25～25.4
  - 25
  - 25.4
- 26
- 27～27.5
  - 27
  - 27.5
- 28～28.58
  - 28
  - 28.58
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 40
- 42
- 44
- 45
- 46
- 47
- 48
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 60
- 62
- 64
- 65
- 67
- 70
- 72
- 75
- 78
- 80
- 82
- 85
- 100
- 120
Drawing

Clear

Underneck length (ℓ1)(mm)
- 15
- 18
- 22
- 24
- 27
- 29
- 30
- 32
- 34
- 35
- 36
- 45
- 47
- 50
- 55
- 57
- 63
- 70
- 75
[17-112/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

17

18

20

22

24

25

32

42
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

Outer Diameter 6/Bottom Blade 3

8

Outer Diameter 8/Bottom Blade 4

10

Outer Diameter 10/Bottom Blade 5

12

14

Outer Diameter 14/Bottom Blade 7

16

Outer Diameter 16/Bottom Blade 8

Bur End
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

38

40

45

50

55

56

57

58

60

62

63

63.5

65

66

68

69

70

72

73

74

75

76

80

82

83

85

86

88

89

90

92

94

95

97

98

100

104

105

110

112

115

120

121

125

130

135

140

150

160

170

180

200

220

240

250
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear