(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Radius End Mills

An online store for carbide radius end mills. In MISUMI's e-catalog, by setting conditions for specifications/standards such as blade diameter, radius size, compatible work materials, blade length, machining applications such as flat surface / side surface /groove, and coating presence, you can easily find the desired tool. A varied lineup including multi-blades for high hardness steel machining, products for aluminum machining with DLC coating, blade length difference, etc. is available.
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

    (Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

      MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels

        Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN

          Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

            TSC series carbide radius end mill, 4-flute, 45° spiral / short model

              DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

                HLRS2000 HM Coated 2-Flute Long Neck Radius

                  (Economy series) XAL series carbide radius end mill, 2-flute / short model

                    TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

                      TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

                        GS MILL Hard Radius GSH-R

                          GS MILL radius GS4-R

                            Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

                              ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

                                HRRS, HM Coated 4-Flute Short Shank Radius

                                  Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]

                                    MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                                      Power Radius End Mill MSXH440R

                                        CBN End Mills 2 Flutes Radius

                                          Epoch SUS Multi, Regular Radius, EPSM4□□□-R□.□-PN

                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

                                              Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

                                                Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                                  Uneven Lead End Mill (5 Flutes) For Machining FX Coated Titanium Alloy

                                                    UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL

                                                      4-Flute Long Neck Radius End Mill for Hardened Steel

                                                        TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

                                                          TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                                                            TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

                                                              TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                                                                TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

                                                                  (Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                                                                    (Economy series) XAL series carbide radius end mill, 4-flute / short model

                                                                      TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                                                                        TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                                                                          TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                                                                              TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                                                                                TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                                                                                  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                                                                                    TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                                                                                      TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

                                                                                        TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

                                                                                          TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                                                                                            Brand

                                                                                            MISUMI

                                                                                            NS TOOL

                                                                                            MITSUBISHI HITACHI TOOL

                                                                                            7 LEADERS

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            UNION TOOL

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            OSG

                                                                                            OSG

                                                                                            UNION TOOL

                                                                                            MITSUBISHI HITACHI TOOL

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            OSG

                                                                                            MITSUBISHI HITACHI TOOL

                                                                                            DIJET

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            OSG

                                                                                            OSG

                                                                                            NS TOOL

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            Product Series

                                                                                            (Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

                                                                                            MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels

                                                                                            Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN

                                                                                            Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / short model

                                                                                            DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

                                                                                            HLRS2000 HM Coated 2-Flute Long Neck Radius

                                                                                            (Economy series) XAL series carbide radius end mill, 2-flute / short model

                                                                                            TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

                                                                                            TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

                                                                                            GS MILL Hard Radius GSH-R

                                                                                            GS MILL radius GS4-R

                                                                                            Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

                                                                                            ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

                                                                                            HRRS, HM Coated 4-Flute Short Shank Radius

                                                                                            Epoch TH, Hard Regular Flute Length with Corner R CEPR6□□□-□□-TH [Alteration Supported Product]

                                                                                            MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                                                                                            Power Radius End Mill MSXH440R

                                                                                            CBN End Mills 2 Flutes Radius

                                                                                            Epoch SUS Multi, Regular Radius, EPSM4□□□-R□.□-PN

                                                                                            Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

                                                                                            Diamond Coated End Mill, 2-Flute Corner Radius, Type-N 6722

                                                                                            Square End Mill Regular 4-Flute Corner Radius for High Hardness Steel GF300T 3361

                                                                                            Uneven Lead End Mill (5 Flutes) For Machining FX Coated Titanium Alloy

                                                                                            UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL

                                                                                            4-Flute Long Neck Radius End Mill for Hardened Steel

                                                                                            TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

                                                                                            TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

                                                                                            TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

                                                                                            TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

                                                                                            (Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

                                                                                            (Economy series) XAL series carbide radius end mill, 4-flute / short model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

                                                                                            TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

                                                                                            TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

                                                                                            Days to Ship Same day or more 8 Day(s) or more 12 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) 12 Day(s) or more 27 Day(s) or more 8 Day(s) or more 12 Day(s) 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more
                                                                                            Specifications
                                                                                            • XAL
                                                                                            • General Steel
                                                                                            • 4 Flutes
                                                                                                  • TS
                                                                                                  • General Steel
                                                                                                  • 4 Flutes
                                                                                                  • S (Short)
                                                                                                  • DLC
                                                                                                  • Aluminum
                                                                                                  • 2 Flutes
                                                                                                  • R (Regular)
                                                                                                    • XAL
                                                                                                    • General Steel
                                                                                                    • 2 Flutes
                                                                                                    • TS
                                                                                                    • General Steel
                                                                                                    • 2 Flutes
                                                                                                    • B (Stub)
                                                                                                    • TS
                                                                                                    • General Steel
                                                                                                    • 2 Flutes
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • B (Stub)
                                                                                                                                    • XAL
                                                                                                                                    • General Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • XAL
                                                                                                                                    • General Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • B (Stub)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • B (Stub)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • High-Hardness Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • B (Stub)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • B (Stub)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • B (Stub)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 3 Flutes
                                                                                                                                    • R (Regular)
                                                                                                                                    • TS
                                                                                                                                    • General Steel
                                                                                                                                    • 4 Flutes
                                                                                                                                    • S (Short)
                                                                                                                                    Blade diameter (D)(φ)3 ~ 201 ~ 61 ~ 203 ~ 203 ~ 202 ~ 120.4 ~ 61 ~ 121 ~ 120.2 ~ 36 ~ 203 ~ 123 ~ 256 ~ 122 ~ 126 ~ 206 ~ 123 ~ 120.5 ~ 31 ~ 203 ~ 206 ~ 123 ~ 1612 ~ 2512 ~ 251 ~ 64 ~ 124 ~ 204 ~ 124 ~ 122 ~ 60 ~ 163 ~ 202 ~ 122 ~ 123 ~ 122 ~ 122 ~ 204 ~ 163 ~ 123 ~ 123 ~ 123 ~ 123 ~ 203 ~ 22
                                                                                                                                    R Size(mm)0.2 ~ 30.05 ~ 10.1 ~ 50.1 ~ 40.2 ~ 30.2 ~ 10.05 ~ 10.1 ~ 30.1 ~ 30.05 ~ 0.50.2 ~ 20.2 ~ 20.2 ~ 50.5 ~ 10.3 ~ 40.3 ~ 30.1 ~ 30.3 ~ 30.05 ~ 0.50.1 ~ 50.2 ~ 3-0.5 ~ 2R0 ~ R61 ~ 50.05 ~ 10.813 ~ 2.4380.813 ~ 2.6070.813 ~ 2.4380.813 ~ 2.4380.2 ~ 0.50.2 ~ 20.1 ~ 30.5 ~ 20.5 ~ 20.75 ~ 30.5 ~ 20.5 ~ 31 ~ 30.3 ~ 10.3 ~ 10.5 ~ 10.3 ~ 20.2 ~ 20.2 ~ 2
                                                                                                                                    Blade length (ℓ)(mm)16 ~ 560.8 ~ 51.5 ~ 3010 ~ 555 ~ 385 ~ 360.4 ~ 63 ~ 301.5 ~ 180.16 ~ 613 ~ 387.5 ~ 266 ~ 509 ~ 182 ~ 1215 ~ 4512 ~ 248 ~ 260.3 ~ 1.82.5 ~ 508 ~ 3810 ~ 22-24 ~ 5024 ~ 50-8 ~ 248 ~ 408 ~ 248 ~ 243 ~ 916 ~ 488 ~ 382 ~ 124 ~ 241.2 ~ 52 ~ 124 ~ 406 ~ 244.5 ~ 184.5 ~ 184.5 ~ 185 ~ 265 ~ 564.5 ~ 30
                                                                                                                                    Number of flutes(sheet)44424222 ~ 4226 ~ 844446442442455-3434434334444343334
                                                                                                                                    Overall Length (L)(mm)60 ~ 13050 ~ 11068 ~ 15550 ~ 16060 ~ 11040 ~ 8050 ~ 12040 ~ 7540 ~ 7540 ~ 10050 ~ 10045 ~ 7550 ~ 12050 ~ 8045 ~ 7560 ~ 12580 ~ 11060 ~ 8045 ~ 5056 ~ 12560 ~ 12557 ~ 8357 ~ 9290 ~ 14090 ~ 140-50 ~ 10050 ~ 15080 ~ 16080 ~ 1605060 ~ 11050 ~ 10050 ~ 10050 ~ 10060 ~ 11050 ~ 10050 ~ 13070 ~ 18040 ~ 6540 ~ 6560 ~ 10060 ~ 10060 ~ 13080 ~ 200
                                                                                                                                    work materialgeneral steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]-Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎]-Stainless Steel[○] / Titanium[◎]-general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
                                                                                                                                    Shank diameter (d)(mm)6 ~ 164 ~ 66 ~ 203 ~ 206 ~ 204 ~ 124 ~ 64 ~ 124 ~ 124 ~ 66 ~ 206 ~ 126 ~ 256 ~ 123 ~ 126 ~ 206 ~ 126 ~ 124 ~ 66 ~ 206 ~ 206 ~ 126 ~ 1612 ~ 2512 ~ 25-6 ~ 126 ~ 206 ~ 126 ~ 1266 ~ 164 ~ 204 ~ 124 ~ 126 ~ 124 ~ 124 ~ 204 ~ 166 ~ 126 ~ 126 ~ 126 ~ 126 ~ 206 ~ 20
                                                                                                                                    Underneck length (ℓ1)(mm)-2 ~ 485 ~ 100-18 ~ 7323 ~ 501 ~ 60-14 ~ 451 ~ 60----6 ~ 36---1.5 ~ 6--21 ~ 3821 ~ 4436 ~ 7536 ~ 75---35 ~ 10835 ~ 108-----7.5 ~ 24--28 ~ 120--14 ~ 6818 ~ 7026 ~ 9210 ~ 18
                                                                                                                                    Machining ApplicationPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / GroovePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfaceSide / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed)Side / Groove-----Plane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Inclined Cuts
                                                                                                                                    CoatingFor General Steels (AlCrN, etc.)For High Hardness (Silicon Group)--For High Hardness (Silicon Group)DLCFor High Hardness (Silicon Group)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)For High Hardness (Silicon Group)TiAlNTiAlNTiAlNTiAlN-For High Hardness (Silicon Group)TiAlNFor High Hardness (Silicon Group)--TiAlNDia CoatOther-TiAlN-For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)
                                                                                                                                    TyperadiusLong-Neck RadiusradiusradiusradiusradiusLong-Neck RadiusradiusradiusTapered neck radiusradiusradiusradiusradiusLong-Neck Radiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradius-High-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusradiusradiusradiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusHigh-Feed RadiusLong-Neck Radiusradiusradiusradiusradiusradiusradius
                                                                                                                                    Torsion Angle (θ)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)-Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)-Other-Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)No torsionPowerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)
                                                                                                                                    R Precision(μm)±0.02 ~ 100.005 to -0.005 ~ 0.01~-0.01-0~-20±0.01±0.01 ~ ±0.02-±0.02±0.01 ~ ±0.02±0.005 ~ ±0.01-0~-0.030 ~ 0~-0.015----0.01~-0.01-------------±0.005±0.02±0.02±0.015±0.015±0.02±0.015±0.015±0.015±0.01±0.01±0.01±0.01±0.01±0.01

                                                                                                                                    Loading...

                                                                                                                                    Related Categories to Carbide Radius End Mills