(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Radius End Mills(Torsion Angle (θ):Standard torsion (30-40°))

An online store for carbide radius end mills. In MISUMI's e-catalog, by setting conditions for specifications/standards such as blade diameter, radius size, compatible work materials, blade length, machining applications such as flat surface / side surface /groove, and coating presence, you can easily find the desired tool. A varied lineup including multi-blades for high hardness steel machining, products for aluminum machining with DLC coating, blade length difference, etc. is available.
[What is a carbide radius end mill?]
An end mill made of cemented carbide that mainly cuts with a round cutting edge on the bottom flute rim. It is mostly used for flat/curved surface cutting and also for applications similar to ball end mills, but the applicable curved surface shape is limited. In addition, since the cutting edge is rounded, the cutting edge tip does not get damaged, and can be used for rough cutting to perform high efficiency machining.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

    TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

      Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN

        Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

          Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

            (Economy series) XAL series carbide radius end mill, 2-flute / short model

              GS MILL radius GS4-R

                MSRS230 MUGEN-COATING 2-Flute Radius End Mill

                  MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                    Power Radius End Mill MSXH440R

                      MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels

                        Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723

                          TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

                            (Economy series) XAL series carbide radius end mill, 4-flute / short model

                              TSC series carbide radius end mill, 2-flute stub model

                                TSC series carbide radius end mill, 2-flute / short model

                                  TSC series carbide radius end mill, 2-flute / regular model

                                    TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

                                      TSC Series Carbide Radius End Mill 4-Flute / Stub Type

                                        TSC series carbide radius end mill, 4-flute / short model

                                          TSC series carbide radius end mill, 4-flute / regular model

                                            TSC series carbide long neck radius end mill, 2-flute, long neck model

                                              TSC series carbide long neck radius end mill, 4-flute / long neck model

                                                TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

                                                  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

                                                    Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

                                                      Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                                                        DLC Mill, Radius 2DLCM-R

                                                          GS MILL Roughing Radius GSRE-R

                                                            X's Mill Geo Radius 4GEOLS-R

                                                              X's Mill Geo Radius 4XSGEO-R

                                                                ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

                                                                  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

                                                                    ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

                                                                      3 Flutes Short for Copper & Aluminum Alloys

                                                                        Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

                                                                          Diamond Coated 2Flutes Long Shank

                                                                            Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

                                                                              Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

                                                                                Micro Grain Carbide End Mills DG Coated 2/4 Flutes Long Neck/Pencil Neck Corner Radius

                                                                                  Micro Grain Carbide End Mills WX Super Coated High-precision

                                                                                    HLRS4000 HM Coated 4-Flute Long Neck Radius

                                                                                      HLRS2000 HM Coated 2-Flute Long Neck Radius

                                                                                        HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius

                                                                                          NSR-2 radius end mill

                                                                                            MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill

                                                                                            Brand

                                                                                            MISUMI

                                                                                            MITSUBISHI HITACHI TOOL

                                                                                            7 LEADERS

                                                                                            OSG

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            GUHRING

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            UNION TOOL

                                                                                            UNION TOOL

                                                                                            UNION TOOL

                                                                                            NS TOOL

                                                                                            NS TOOL

                                                                                            Product Series

                                                                                            TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

                                                                                            Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN

                                                                                            Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

                                                                                            Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

                                                                                            (Economy series) XAL series carbide radius end mill, 2-flute / short model

                                                                                            GS MILL radius GS4-R

                                                                                            MSRS230 MUGEN-COATING 2-Flute Radius End Mill

                                                                                            MSRS430 MUGEN-COATING 4-Flute Radius End Mill

                                                                                            Power Radius End Mill MSXH440R

                                                                                            MHRH430R MUGEN COATING Premium 4-Flute Long Neck Radius End Mill For Hardened Steels

                                                                                            Diamond Coated End Mill, 4-Flute Corner Radius, Type-N 6723

                                                                                            TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

                                                                                            (Economy series) XAL series carbide radius end mill, 4-flute / short model

                                                                                            TSC series carbide radius end mill, 2-flute stub model

                                                                                            TSC series carbide radius end mill, 2-flute / short model

                                                                                            TSC series carbide radius end mill, 2-flute / regular model

                                                                                            TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

                                                                                            TSC Series Carbide Radius End Mill 4-Flute / Stub Type

                                                                                            TSC series carbide radius end mill, 4-flute / short model

                                                                                            TSC series carbide radius end mill, 4-flute / regular model

                                                                                            TSC series carbide long neck radius end mill, 2-flute, long neck model

                                                                                            TSC series carbide long neck radius end mill, 4-flute / long neck model

                                                                                            TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

                                                                                            Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

                                                                                            Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

                                                                                            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                                                                                            DLC Mill, Radius 2DLCM-R

                                                                                            GS MILL Roughing Radius GSRE-R

                                                                                            X's Mill Geo Radius 4GEOLS-R

                                                                                            X's Mill Geo Radius 4XSGEO-R

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

                                                                                            ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

                                                                                            3 Flutes Short for Copper & Aluminum Alloys

                                                                                            Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

                                                                                            Diamond Coated 2Flutes Long Shank

                                                                                            Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

                                                                                            Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

                                                                                            Micro Grain Carbide End Mills DG Coated 2/4 Flutes Long Neck/Pencil Neck Corner Radius

                                                                                            Micro Grain Carbide End Mills WX Super Coated High-precision

                                                                                            HLRS4000 HM Coated 4-Flute Long Neck Radius

                                                                                            HLRS2000 HM Coated 2-Flute Long Neck Radius

                                                                                            HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius

                                                                                            NSR-2 radius end mill

                                                                                            MSTNR230 MUGEN-COATING Long Tapered Neck Radius End Mill

                                                                                            Days to Ship 8 Day(s) or more 12 Day(s) or more 10 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                                            Specifications
                                                                                            • TS
                                                                                            • General Steel
                                                                                            • 2 Flutes
                                                                                            • B (Stub)
                                                                                                  • XAL
                                                                                                  • General Steel
                                                                                                  • 2 Flutes
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • B (Stub)
                                                                                                              • XAL
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 2 Flutes
                                                                                                              • B (Stub)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 2 Flutes
                                                                                                              • S (Short)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 2 Flutes
                                                                                                              • R (Regular)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • B (Stub)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • B (Stub)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • S (Short)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • R (Regular)
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 2 Flutes
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 4 Flutes
                                                                                                              • TS
                                                                                                              • General Steel
                                                                                                              • 2 Flutes
                                                                                                              • DIA
                                                                                                              • Graphite
                                                                                                              • 4 Flutes
                                                                                                              • Long
                                                                                                              • Non-Coated
                                                                                                              • Resin
                                                                                                              • 2 Flutes
                                                                                                              • R (Regular)
                                                                                                              • Non-Coated
                                                                                                              • General Steel
                                                                                                                                                    Blade diameter (D)(φ)1 ~ 121 ~ 203 ~ 203 ~ 251 ~ 123 ~ 121 ~ 56 ~ 123 ~ 121 ~ 66 ~ 122 ~ 63 ~ 202 ~ 121 ~ 201 ~ 202 ~ 121 ~ 121 ~ 121 ~ 120.2 ~ 61 ~ 60.2 ~ 36 ~ 121 ~ 102 ~ 202 ~ 206 ~ 203 ~ 203 ~ 200.5 ~ 2.51 ~ 126 ~ 203 ~ 203 ~ 205 ~ 113 ~ 206 ~ 250.5 ~ 120.2 ~ 40.8 ~ 60.4 ~ 60.2 ~ 61 ~ 60.2 ~ 3
                                                                                                                                                    R Size(mm)0.1 ~ 30.1 ~ 50.1 ~ 40.2 ~ 50.1 ~ 30.2 ~ 20.1 ~ 1.50.1 ~ 30.3 ~ 30.05 ~ 1-0.2 ~ 0.50.1 ~ 30.2 ~ 30.1 ~ 30.1 ~ 30.3 ~ 10.1 ~ 30.1 ~ 30.1 ~ 30.05 ~ 10.05 ~ 10.05 ~ 0.50.5 ~ 30.20.1 ~ 30.2 ~ 30.5 ~ 40.2 ~ 20.2 ~ 30.10.1 ~ 30.5 ~ 30.2 ~ 30.5 ~ 30.3 ~ 10.5 ~ 30.3 ~ 50.1 ~ 10.05 ~ 10.05 ~ 10.05 ~ 10.05 ~ 10.2 ~ 20.05 ~ 0.5
                                                                                                                                                    Blade length (ℓ)(mm)1.5 ~ 181.5 ~ 3010 ~ 556 ~ 503 ~ 307.5 ~ 262 ~ 1012 ~ 248 ~ 260.8 ~ 513 ~ 263 ~ 98 ~ 383 ~ 182 ~ 403 ~ 603 ~ 181.5 ~ 182 ~ 243 ~ 360.16 ~ 121.5 ~ 120.16 ~ 630 ~ 603 ~ 304 ~ 606 ~ 3813 ~ 384.5 ~ 308 ~ 380.7 ~ 3.72.5 ~ 2620 ~ 568 ~ 384.5 ~ 3010 ~ 224.5 ~ 3012 ~ 500.9 ~ 120.15 ~ 40.48 ~ 4.80.4 ~ 60.2 ~ 63 ~ 180.15 ~ 2.5
                                                                                                                                                    Number of flutes(sheet)24242424444442224444242422 ~ 42444222332362 ~ 42 ~ 442222
                                                                                                                                                    Overall Length (L)(mm)40 ~ 7568 ~ 15550 ~ 16050 ~ 12050 ~ 7545 ~ 7560 ~ 7080 ~ 11060 ~ 8050 ~ 11057 ~ 835050 ~ 10035 ~ 6040 ~ 11045 ~ 12535 ~ 6040 ~ 7540 ~ 7545 ~ 8540 ~ 10040 ~ 10040 ~ 100150 ~ 20050 ~ 8040 ~ 12540 ~ 10050 ~ 10060 ~ 20050 ~ 1255040 ~ 11090 ~ 16050 ~ 10550 ~ 125100 ~ 18050 ~ 12550 ~ 12050 ~ 15050 ~ 11050 ~ 12050 ~ 12050 ~ 10045 ~ 6050 ~ 110
                                                                                                                                                    work materialgeneral steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎]general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]-general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Aluminum[◎] / Copper[◎] / Resin[○]Aluminum[◎] / Copper[◎] / Resin[○]Graphite[◎]Aluminum[◎] / Copper[○] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]Graphite[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]
                                                                                                                                                    Shank diameter (d)(mm)4 ~ 126 ~ 203 ~ 206 ~ 254 ~ 126 ~ 124 ~ 66 ~ 126 ~ 124 ~ 66 ~ 1264 ~ 204 ~ 124 ~ 204 ~ 204 ~ 124 ~ 124 ~ 124 ~ 124 ~ 64 ~ 64 ~ 66 ~ 123 ~ 104 ~ 204 ~ 206 ~ 206 ~ 206 ~ 2064 ~ 126 ~ 206 ~ 206 ~ 204 ~ 106 ~ 206 ~ 254 ~ 124 ~ 64 ~ 64 ~ 64 ~ 64 ~ 64 ~ 6
                                                                                                                                                    Underneck length (ℓ1)(mm)14 ~ 455 ~ 100-------2 ~ 4821 ~ 38---17 ~ 4523 ~ 55-14 ~ 4517 ~ 4523 ~ 551 ~ 403 ~ 401 ~ 6060 ~ 85----12 ~ --1.5 ~ 5-------4 ~ 600.5 ~ 602 ~ 481 ~ 600.5 ~ 30-1 ~ 60
                                                                                                                                                    Machining ApplicationPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Groove-Plane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)
                                                                                                                                                    CoatingFor High Hardness (Silicon Group)--TiAlNFor General Steels (AlCrN, etc.)TiAlNTiAlNTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)Dia CoatFor High Hardness (Silicon Group)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)Dia CoatNon-CoatedFor High Hardness (Silicon Group) / Non-CoatedDLCTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNNon-CoatedNon-CoatedDia CoatDLCTiAlNNon-CoatedFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)Non-CoatedTiAlN
                                                                                                                                                    TyperadiusradiusradiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusLong-Neck RadiusTapered neck radiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusLong-Neck RadiusLong-Neck RadiusLong-Neck RadiusradiusTapered neck radius
                                                                                                                                                    Torsion Angle (θ)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)
                                                                                                                                                    R Precision(μm)±0.01 ~ ±0.02-0~-20-±0.020~-0.030 ~ 0~-0.0150.005~-0.005 ~ 0.01~-0.010.01~-0.01-0.005 to -0.005 ~ 0.01~-0.01-±0.005±0.02±0.01±0.01 ~ ±0.02±0.01 ~ ±0.02±0.02±0.01 ~ ±0.02±0.01 ~ ±0.02±0.01 ~ ±0.02±0.005 ~ ±0.01±0.005 ~ ±0.01±0.005 ~ ±0.01±0.02±0.02±0.02-0.032~-0.059 ~ -0.014~-0.028--0.032~-0.059 ~ -0.014~-0.028-0.032~-0.059 ~ -0.014~-0.028-------------0.02~-0.020.005~-0.005

                                                                                                                                                    Loading...

                                                                                                                                                    Related Categories to Carbide Radius End Mills