(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Radius End Mills (Carbide)（work material：Quenched and tempered steel）

102 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less 17 Day(s) or Less 18 Day(s) or Less

TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
GS MILL radius GS4-R

NACHI(FUJIKOSHI)

Ideal for corner rounding and high-speed contour machining of molds and machine parts.

Days to Ship: 16 Day(s) or more
Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN

MITSUBISHI HITACHI TOOL

Compatible with from rough processing to finishing processing of stainless steel, carbon steel, alloy steel, etc.

Days to Ship: 12 Day(s) or more
One Cut Super Radius End Mill DV-OCSR

DIJET

Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45°, regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Epoch SUS Multi, Regular Radius, EPSM4□□□-R□.□-PN

MITSUBISHI HITACHI TOOL

[Features]·Vibration suppression effect due to unequal spacing shape, Smooth cutting chip discharge with 2-layer gash (bottom edge pocket), Double eccentric that secures the strength of the cutting edge and suppresses wear has achieved improved pitching resistance and abrasion resistance, Heat resistant PN coating with excellent adhesion to the base material is used. ·The double eccentric effect improves pitching resistance and abrasion resistance, achieving long-lifespan machining without chattering even at high efficiency. [Applications]·Multi-purpose product from roughing to finishing of stainless steel

Days to Ship: 12 Day(s) or more
TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

MISUMI

Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

Volume Discount

TS

High-Hardness Steel

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

Volume Discount

TS

High-Hardness Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

MISUMI

A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

MISUMI

3-flute 45° helix radius that's resistant to chattering is available at an affordable price

Volume Discount

XAL

General Steel

3 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

MISUMI

4-Flute Radius for High-Efficiency and High-Speed Machining

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide radius end mill, 2-flute / short model

MISUMI

Radius end mills are available at low prices

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide radius end mill, 4-flute / short model

MISUMI

The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

Volume Discount

TS

High-Hardness Steel

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

MISUMI

[Features]
·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners
·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners
·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

Volume Discount

TS

High-Hardness Steel

4 Flutes
Days to Ship: Same day or more
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

MISUMI

[Features]
·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

MISUMI

Long neck type with interference prevention can be selected from a number of effective lengths

Volume Discount

TS

High-Hardness Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

MISUMI

[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: Same day or more
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Multi-function end mill radius type.
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 2-flute stub model

MISUMI

[Features]
·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 2-flute / short model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 2-flute / regular model

MISUMI

[Features]
·General purpose 2-flute end mill with regular flute length type with cutting edge radius
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill 4-Flute / Stub Type

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute / short model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute / regular model

MISUMI

[Features]
·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

MISUMI

[Features]
·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

MISUMI

By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

Volume Discount

TS

High-Hardness Steel

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
·Taper neck is effective in suppressing chattering
·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

MISUMI

The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

Volume Discount

TS

High-Hardness Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

MISUMI

[Features]
·High helix angle end mill with radius for machining high hardness steel
·High tool rigidity minimizes tool tilt during side milling
·Machining of high hardness steel up to 65HRC is possible
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

Multi-Flutes （5 ~）

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type

MISUMI

The popular radius type for stainless steel processing is also effective in preventing chipping

Volume Discount

TS

SUS

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

MISUMI

[Features]
·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed
·Long neck type is ideal for deep cavity milling of deep pockets, etc.
·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

3 Flutes
Days to Ship: 16 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 16 Day(s) or more
(Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

MISUMI

Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

Volume Discount
Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)


Brand	MISUMI	NACHI(FUJIKOSHI)	MITSUBISHI HITACHI TOOL	DIJET	MISUMI	MITSUBISHI HITACHI TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	GS MILL radius GS4-R	Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN	One Cut Super Radius End Mill DV-OCSR	TSC series carbide radius end mill, 4-flute, 45°, regular model	Epoch SUS Multi, Regular Radius, EPSM4□□□-R□.□-PN	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 2-flute / short model	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 2-flute / regular model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC Series Carbide Radius End Mill 4-Flute / Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	(Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model
Days to Ship	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	Same day or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications	TS General Steel 2 Flutes B (Stub)				TS General Steel 4 Flutes R (Regular)		TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel Multi-Flutes （5 ~） B (Stub)	TS SUS 3 Flutes S (Short)	TS High-Hardness Steel 3 Flutes	Non-Coated General Steel
Blade diameter (D)(φ)	1 ～ 12	3 ～ 12	1 ～ 20	2 ～ 20	3 ～ 20	1 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	2 ～ 6	0 ～ 16	4 ～ 12	1 ～ 12	3 ～ 20	2 ～ 12	2 ～ 12	3 ～ 12	2 ～ 12	2 ～ 20	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	2 ～ 12	1 ～ 20	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	1 ～ 12	0.2 ～ 3	3 ～ 12	3 ～ 12	2 ～ 6	6 ～ 12	3 ～ 12	4 ～ 12	2 ～ 20	2 ～ 20
R Size(mm)	0.1 ～ 3	0.2 ～ 2	0.1 ～ 5	0.5 ～ 3	0.2 ～ 3	0.1 ～ 5	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.2 ～ 2	0.1 ～ 3	0.1 ～ 3	0.5 ～ 2	0.5 ～ 2	0.75 ～ 3	0.5 ～ 2	0.5 ～ 3	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.05 ～ 0.5	0.8 ～ 2	0.8 ～ 2	0.2 ～ 0.5	0.5 ～ 2	0.5 ～ 2	1 ～ 2	0.1 ～ 3	0.2 ～ 3
Blade length (ℓ)(mm)	1.5 ～ 18	7.5 ～ 26	1.5 ～ 30	4 ～ 40	5 ～ 56	2.5 ～ 50	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24	3 ～ 9	16 ～ 48	18 ～ 38	3 ～ 30	8 ～ 38	2 ～ 12	4 ～ 24	1.2 ～ 5	2 ～ 12	4 ～ 40	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	3 ～ 18	2 ～ 40	3 ～ 60	3 ～ 18	1.5 ～ 18	2 ～ 24	3 ～ 36	0.16 ～ 6	4.5 ～ 18	4.5 ～ 18	3 ～ 9	5 ～ 12	7 ～ 18	8 ～ 24	4 ～ 60	4 ～ 45
Number of flutes(sheet)	2	4	4	3	4	4	3	4	3	4	4	3	4	2	4	3	3	4	4	4	4	3	4	3	3	3	4	4	4	2	2	2	4	4	4	4	2	3	4	4	6	3	3	2 ～ 4	4
Overall Length (L)(mm)	40 ～ 75	45 ～ 75	68 ～ 155	70 ～ 185	60 ～ 130	56 ～ 125	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160	50	60 ～ 110	60 ～ 100	50 ～ 75	50 ～ 100	50 ～ 100	50 ～ 100	60 ～ 110	50 ～ 100	50 ～ 130	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	35 ～ 60	40 ～ 110	45 ～ 125	35 ～ 60	40 ～ 75	40 ～ 75	45 ～ 85	40 ～ 100	80 ～ 160	80 ～ 160	50	60 ～ 85	60 ～ 100	70 ～ 140	40 ～ 125	50 ～ 110
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○/◎]	Quenched and tempered steel[◎]
Shank diameter (d)(mm)	4 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6	6 ～ 16	6 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	4 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 6	6 ～ 16	6 ～ 16	6	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 20	4 ～ 20
Underneck length (ℓ1)(mm)	14 ～ 45	-	5 ～ 100	6 ～ 15	26 ～ 92	-	-	-	35 ～ 108	35 ～ 108	-	-	-	-	-	-	-	7.5 ～ 24	-	-	28 ～ 120	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	-	17 ～ 45	23 ～ 55	-	14 ～ 45	17 ～ 45	23 ～ 55	1 ～ 60	24 ～ 105	24 ～ 105	-	11 ～ 55	-	28 ～ 90	-	-
Machining Application	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Side / Curved surface	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts
Coating	For High Hardness (Silicon Group)	TiAlN	-	-	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / Non-Coated	For General Steels (AlCrN, etc.)
Type	radius	radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Tapered neck radius	Tapered neck radius	Tapered neck radius	High-Feed Radius	radius	radius	Long-Neck Radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)
R Precision(μm)	±0.01 ～ ±0.02	0～-0.030 ～ 0～-0.015	-	0.015～-0.015	±0.01	-	-	-	-	-	±0.005	±0.02	±0.02 ～ 10	±0.02	±0.02	±0.015	±0.015	±0.02	±0.015	±0.015	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.02	±0.02	±0.005	±0.02	±0.02	±0.015	±0.02	±0.02

Configure

Specification/Dimensions

Blade diameter (D)(φ)
0

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.05

0.1

F0.12

F0.16

0.2

F0.2

F0.24

F0.28

0.3

F0.32

0.4

F0.4

0.5

0.5R

0.6

0.7

0.75

0.76

0.8

0.813

0.9

1

1R

R1

1.1

1.2

1.219

1.3

1.4

1.5

1.5R

R1.5

1.6

1.625

1.7

1.8

1.9

2

2R

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

2.5R

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.05

3.2

3.5

4

R4

5

R5

6

R6

6.35

6.5

8
[0.1-3/0.1mm Unit(s)]
Drawing

Clear

Blade length (ℓ)(mm)
0.16

0.24

0.25

0.28

0.3

0.32

0.4

0.5

0.6

0.64

0.7

0.75

0.8

0.9

1

1.2

1.5

1.6

1.8

2

2.1

2.25

2.3

2.4

2.5

2.7

3

3.2

3.5

3.7

4

4.5

5

5.25

5.5

5.6

6

6.75

7

7.5

8

8.25

8.4

9

10

10.5

11

12

12.5

13

13.5

14

15

16

16.5

17

17.5

18

19

19.5

20

21

22

22.5

24

25

25.5

26

27

27.5

28

30

32

33

34

35

36

37.5

38

40

41

42

45

48

50

54

55

56

60

75
[5-56/1mm Unit(s)]
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Overall Length (L)(mm)
11

13

16

20

25

32

34

35

39

40

45

49

50

51

52

55

56

57

58

60

62

63

65

68

70

72

74

75

80

83

85

86

88.90

90

92

93

94

95

99

100

104

105

108

110

115

117

120

121

125

126

130

135

140

150

155

160

170

180

185

200

220

230
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Underneck length (ℓ1)(mm)
1

1.5

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

12

12.5

13

14

15

16

18

19

20

21

22

24

25

27

28

29

30

32

34

35

36

38

40

42

44

45

48

50

54

55

56

60

65

66

70

72

75

80

82

84

85

90

95

100

105

108

120

-
[11-92/1mm Unit(s)]
Drawing

Clear

Machining Application
- Plane
- Side
- Curved surface
- Groove
- Plunging (Z feed)
- Inclined Cuts
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- Dia Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
- 45°
Clear

R Precision(μm)
-0.032～-0.059

-0.025～-0.047

-0.020～-0.038

-0.014～-0.028

-0.005 to 0.005

0～-20

0～-0.05

0～-0.030

0～-0.015

0～+0.04

±0.005

±0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05

10
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (44)
- Economy series (0)
- OSG (17)
- NACHI(FUJIKOSHI) (7)
- KYOWA SEIKO (5)
- 7 LEADERS (4)
- DIJET (4)
- OKAZAKI SEIKO (4)
- SANKO MFG (4)
- MITSUBISHI HITACHI TOOL (3)
- GUHRING (2)
- SANDVIK (2)
- THE CUT (2)
- UNION TOOL (2)
- ATOM (1)
- NS TOOL (1)
- KYOCERA (0)
- MAPAL (0)
- WATERMILLS (0)
- TAIYO-TOOL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Radius End Mills (Carbide)

- Radius End Mills (Carbide)
- Long Neck Radius End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Radius End Mills (Carbide)（work material：Quenched and tempered steel）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Radius End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Radius End Mills (Carbide)（work material：Quenched and tempered steel）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Radius End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB