(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Radius End Mills (Carbide)（work material：Copper）

65 items

: 30; 45; 60

Days to Ship	All Same day 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less

TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 10 Day(s) or more
Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN

MITSUBISHI HITACHI TOOL

Compatible with from rough processing to finishing processing of stainless steel, carbon steel, alloy steel, etc.

Days to Ship: 12 Day(s) or more
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

MISUMI

The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

Volume Discount

DLC

Aluminum

3 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
CNRS 4-flute radius for machining titanium and super heat-resistant alloys

UNION TOOL

[Features]
· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy
· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials
· Variable split, high torsion and positive rake angle design enables stable machining
· A blade design that reduces the cutting resistance in helical and inclined use, etc.

Days to Ship: 12 Day(s) or more
Epoch SUS Multi, Regular Radius, EPSM4□□□-R□.□-PN

MITSUBISHI HITACHI TOOL

[Features]·Vibration suppression effect due to unequal spacing shape, Smooth cutting chip discharge with 2-layer gash (bottom edge pocket), Double eccentric that secures the strength of the cutting edge and suppresses wear has achieved improved pitching resistance and abrasion resistance, Heat resistant PN coating with excellent adhesion to the base material is used. ·The double eccentric effect improves pitching resistance and abrasion resistance, achieving long-lifespan machining without chattering even at high efficiency. [Applications]·Multi-purpose product from roughing to finishing of stainless steel

Days to Ship: 12 Day(s) or more
TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

MISUMI

A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

MISUMI

3-flute 45° helix radius that's resistant to chattering is available at an affordable price

Volume Discount

XAL

General Steel

3 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

MISUMI

4-Flute Radius for High-Efficiency and High-Speed Machining

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide radius end mill, 2-flute / short model

MISUMI

Radius end mills are available at low prices

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide radius end mill, 4-flute / short model

MISUMI

The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 10 Day(s) or more
TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

MISUMI

[Features]
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill
·Long shank type ideal for deep cavity milling
·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: Same day or more
TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
·Multi-function end mill radius type.
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 4-flute, 45°, regular model

MISUMI

[Features]
·Radius type of multi-function end mill
·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 2-flute stub model

MISUMI

[Features]
·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC series carbide radius end mill, 2-flute / short model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 2-flute / regular model

MISUMI

[Features]
·General purpose 2-flute end mill with regular flute length type with cutting edge radius
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

MISUMI

[Features]
·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more
TSC Series Carbide Radius End Mill 4-Flute / Stub Type

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 4-flute / short model

MISUMI

[Features]
·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
TSC series carbide radius end mill, 4-flute / regular model

MISUMI

[Features]
·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
·Radius cutting edge is also effective in suppressing chipping
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

MISUMI

[Features]
·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes
Days to Ship: 10 Day(s) or more
TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type

MISUMI

The popular radius type for stainless steel processing is also effective in preventing chipping

Volume Discount

TS

SUS

3 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

MISUMI

In addition to the standard products, the radius can be selected extensively for manufactured products

Volume Discount

DLC

Aluminum

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

MISUMI

Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

Volume Discount

Non-Coated

Aluminum

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

MISUMI

Radius type that's also effective in preventing cutter marks

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

MISUMI

Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

Volume Discount

Non-Coated

Aluminum

3 Flutes
Days to Ship: 16 Day(s) or more
Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

MISUMI

The diamond coated radius shape that's ideal for shaping graphite

Volume Discount

DIA

Graphite

4 Flutes

Long
Days to Ship: 16 Day(s) or more
Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

MISUMI

Small radius type that prevents cutter marks on resin

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 10 Day(s) or more
(Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

MISUMI

Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

Volume Discount
Days to Ship: 16 Day(s) or more
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

MISUMI

Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

Volume Discount
Days to Ship: 16 Day(s) or more
VAC Series Carbide 2-Flute Radius End Mill

MISUMI

[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

MISUMI

[Features]
·Suppresses chattering with unequal lead and unequal flutes
·Stable machining is possible while maintaining finished surface accuracy
·Cutting edge radius also reinforced cutting edge rigid
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
DLC Mill, Radius 2DLCM-R

NACHI(FUJIKOSHI)

End mill for aluminum and copper alloys. Capable of rounding corners of grooves.

Days to Ship: 16 Day(s) or more
GS MILL Roughing Radius GSRE-R

NACHI(FUJIKOSHI)

Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.

Days to Ship: 16 Day(s) or more
GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

OSG

Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

Days to Ship: 12 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

OSG

End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

Days to Ship: 16 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

OSG

Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

Days to Ship: 2 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

OSG

Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

Days to Ship: 8 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)


Brand	MISUMI	MITSUBISHI HITACHI TOOL	MISUMI	UNION TOOL	MITSUBISHI HITACHI TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG
Product Series	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	Epoch SUS Multi Under Head 5Dc / Radius Type EPSM4□□□-□□□-R□.□-PN	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	CNRS 4-flute radius for machining titanium and super heat-resistant alloys	Epoch SUS Multi, Regular Radius, EPSM4□□□-R□.□-PN	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	(Economy series) XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 2-flute / short model	(Economy series) XAL series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 2-flute / regular model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC Series Carbide Radius End Mill 4-Flute / Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	(Economy series) XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	DLC Mill, Radius 2DLCM-R	GS MILL Roughing Radius GSRE-R	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius
Days to Ship	10 Day(s) or more	12 Day(s) or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	Same day or more	Same day or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	Same day or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	2 Day(s) or more	8 Day(s) or more
Specifications	TS General Steel 2 Flutes B (Stub)		DLC Aluminum 3 Flutes R (Regular)			TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes	TS SUS 3 Flutes S (Short)	DLC Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes	DIA Graphite 4 Flutes Long	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated General Steel
Blade diameter (D)(φ)	1 ～ 12	1 ～ 20	2 ～ 12	6 ～ 12	1 ～ 20	2 ～ 6	0 ～ 16	4 ～ 12	1 ～ 12	3 ～ 20	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	3 ～ 20	2 ～ 12	1 ～ 20	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	1 ～ 12	0.2 ～ 3	3 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	5 ～ 22	6 ～ 12	1 ～ 10	2 ～ 20	2 ～ 20	2 ～ 25	1 ～ 12	1.5 ～ 12	2 ～ 20	6 ～ 20	10 ～ 20	0.5 ～ 2.5	1 ～ 12	6 ～ 20
R Size(mm)	0.1 ～ 3	0.1 ～ 5	0.2 ～ 1	1 ～ 2	0.1 ～ 5	0.2 ～ 0.5	0.2 ～ 2	0.2 ～ 2	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.05 ～ 0.5	0.5 ～ 2	0.2 ～ 1	0.2 ～ 1	0.2 ～ 1	0.5 ～ 2	0.5 ～ 3	0.2	0.1 ～ 3	0.2 ～ 3	0.2 ～ 6.5	0.1 ～ 3	0.2 ～ 3	0.2 ～ 3	0.5 ～ 4	0.5 ～ 1	0.1	0.1 ～ 3	0.5 ～ 3
Blade length (ℓ)(mm)	1.5 ～ 18	1.5 ～ 30	5 ～ 36	16 ～ 26	2.5 ～ 50	3 ～ 9	16 ～ 48	18 ～ 38	3 ～ 30	8 ～ 38	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	5 ～ 56	3 ～ 18	2 ～ 40	3 ～ 60	3 ～ 18	1.5 ～ 18	2 ～ 24	3 ～ 36	0.16 ～ 6	7 ～ 18	5 ～ 36	5 ～ 36	5 ～ 36	9 ～ 33	30 ～ 60	3 ～ 30	4 ～ 60	4 ～ 45	4 ～ 50	2.5 ～ 30	4 ～ 30	6 ～ 38	13 ～ 38	10 ～ 20	0.7 ～ 3.7	2.5 ～ 26	20 ～ 56
Number of flutes(sheet)	2	4	3	4	4	4	3	4	2	4	3	4	3	3	3	4	4	4	4	2	2	2	4	4	4	4	2	3	2	2	3	3	4	2	2 ～ 4	4	4	2	4	2	4	2	2	2	2
Overall Length (L)(mm)	40 ～ 75	68 ～ 155	40 ～ 80	90 ～ 120	56 ～ 125	50	60 ～ 110	60 ～ 100	50 ～ 75	50 ～ 100	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 130	35 ～ 60	40 ～ 110	45 ～ 125	35 ～ 60	40 ～ 75	40 ～ 75	45 ～ 85	40 ～ 100	60 ～ 100	40 ～ 80	40 ～ 80	40 ～ 80	80 ～ 200	150 ～ 200	50 ～ 80	40 ～ 125	50 ～ 110	50 ～ 120	50 ～ 130	50 ～ 150	40 ～ 100	50 ～ 100	32 ～ 58	50	40 ～ 110	90 ～ 160
work material	Copper[○]	Copper[◎]	Copper[○]	Copper[○/◎]	Copper[◎]	Copper[○]	Copper[◎]	Copper[◎]	Copper[◎]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[◎]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]	Copper[○]
Shank diameter (d)(mm)	4 ～ 12	6 ～ 20	4 ～ 12	6 ～ 12	6 ～ 20	6	6 ～ 16	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 6	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	3 ～ 10	4 ～ 20	4 ～ 20	6 ～ 25	6 ～ 12	6 ～ 12	4 ～ 20	6 ～ 20	6 ～ 12	6	4 ～ 12	6 ～ 20
Underneck length (ℓ1)(mm)	14 ～ 45	5 ～ 100	23 ～ 50	-	-	-	-	-	-	-	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	26 ～ 92	-	17 ～ 45	23 ～ 55	-	14 ～ 45	17 ～ 45	23 ～ 55	1 ～ 60	-	23 ～ 50	23 ～ 50	23 ～ 50	-	60 ～ 85	-	-	-	-	-	-	-	-	-	1.5 ～ 5	-	-
Machining Application	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)
Coating	For High Hardness (Silicon Group)	-	DLC	For General Steels (AlCrN, etc.) / TiCN	-	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	Non-Coated	Non-Coated	Non-Coated	Dia Coat	Non-Coated	For High Hardness (Silicon Group) / Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	-	-	DLC	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Tapered neck radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	45°	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Other	-	-	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
R Precision(μm)	±0.01 ～ ±0.02	-	±0.02	-	-	±0.005	±0.02	±0.02 ～ 10	±0.02	±0.02	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.02	±0.02	±0.02	±0.02	±0.02	-	-	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	-

Configure

Specification/Dimensions

Blade diameter (D)(φ)
0

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

12

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.05

0.1

F0.12

F0.16

0.2

F0.2

F0.24

F0.28

0.3

F0.32

0.4

F0.4

0.5

0.5R

0.6

0.7

0.75

0.76

0.8

0.813

0.9

1

1R

R1

1.1

1.2

1.219

1.3

1.4

1.5

1.5R

R1.5

1.6

1.625

1.7

1.8

1.9

2

2R

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

2.5R

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.05

3.2

3.5

4

R4

5

R5

6

R6

6.35

6.5

8
[0.1-3/0.1mm Unit(s)]
Drawing

Clear

Blade length (ℓ)(mm)
0.16

0.24

0.25

0.28

0.3

0.32

0.4

0.5

0.6

0.64

0.7

0.75

0.8

0.9

1

1.2

1.5

1.6

1.8

2

2.1

2.25

2.3

2.4

2.5

2.7

3

3.2

3.5

3.7

4

4.5

5

5.25

5.5

5.6

6

6.75

7

7.5

8

8.25

8.4

9

10

10.5

11

12

12.5

13

13.5

14

15

16

16.5

17

17.5

18

19

19.5

20

21

22

22.5

24

25

25.5

26

27

27.5

28

30

32

33

34

35

36

37.5

38

40

41

42

45

48

50

54

55

56

60

75
[5-56/1mm Unit(s)]
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Overall Length (L)(mm)
11

13

16

20

25

32

34

35

39

40

45

49

50

51

52

55

56

57

58

60

62

63

65

68

70

72

74

75

80

83

85

86

88.90

90

92

93

94

95

99

100

104

105

108

110

115

117

120

121

125

126

130

135

140

150

155

160

170

180

185

200

220

230
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Underneck length (ℓ1)(mm)
1

1.5

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

12

12.5

13

14

15

16

18

19

20

21

22

24

25

27

28

29

30

32

34

35

36

38

40

42

44

45

48

50

54

55

56

60

65

66

70

72

75

80

82

84

85

90

95

100

105

108

120

-
[14-92/1mm Unit(s)]
Drawing

Clear

Machining Application
- Plane
- Side
- Curved surface
- Groove
- Plunging (Z feed)
- Inclined Cuts
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- Dia Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Type
- radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Other
- 45°
Clear

R Precision(μm)
-0.032～-0.059

-0.025～-0.047

-0.020～-0.038

-0.014～-0.028

-0.005 to 0.005

0～-20

0～-0.05

0～-0.030

0～-0.015

0～+0.04

±0.005

±0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05

10
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (36)
- Economy series (0)
- OSG (9)
- 7 LEADERS (4)
- DIJET (4)
- MITSUBISHI HITACHI TOOL (3)
- KYOWA SEIKO (2)
- NACHI(FUJIKOSHI) (2)
- UNION TOOL (2)
- GUHRING (1)
- OKAZAKI SEIKO (1)
- WATERMILLS (1)
- NS TOOL (0)
- KYOCERA (0)
- MAPAL (0)
- ATOM (0)
- SANDVIK (0)
- SANKO MFG (0)
- TAIYO-TOOL (0)
- THE CUT (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Radius End Mills (Carbide)

- Radius End Mills (Carbide)
- Long Neck Radius End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Radius End Mills (Carbide)（work material：Copper）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Radius End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Radius End Mills (Carbide)（work material：Copper）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

R Size(mm)

Blade length (ℓ)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Shank diameter (d)(mm)

Underneck length (ℓ1)(mm)

Machining Application

Coating

Type

Torsion Angle (θ)

R Precision(μm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Radius End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB