(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
This translation is a Google translation Terjemahan ini adalah terjemahan Google
Days to Ship |
|
---|
Days to Ship: | 8 Day(s) or more |
---|
Plane Milling Cutter, End Mill Model
MISUMI
[Features]
·Indexable end mill type holder
·High-precision cutter for face milling, with a cutting edge angle of 45°
·Outer diameter: ⌀32,⌀40,⌀50
·Pitch: 3-flute, 4-flute
·Compatible tip: SEET13T3, SEMT13T3M
Days to Ship: | 8 Day(s) or more |
---|
SEC-Wave Mill WEX2000E/EL Type
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: | 8 Day(s) or more |
---|
Days to Ship: | 8 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: | 8 Day(s) or more |
---|
Used for SEC-Wave Mill, WEX Model WEX-F
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: | 10 Day(s) or more |
---|
SANDVIK
A light-cutting face milling cuter suitable for high-speed finishing
[Features]
The tool is designed with a serrated-tip interface for increased stability and reduced run-out
Days to Ship: | 8 Day(s) or more |
---|
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-125 onto the arbor
Days to Ship: | 12 Day(s) or more |
---|
Days to Ship: | 8 Day(s) or more |
---|
CoroMill R216 Ball End Mill Threaded Coupling R216-T
SANDVIK
Ball end mill for semi-finishing profiling that achieves high productivity and high chip evacuation
Days to Ship: | 8 Day(s) or more |
---|
Shoulder Milling Cutter, End Mill Model
MISUMI
[Features]
·Indexable end mill type holder
·General purpose shoulder milling cutter using ISO insert
·Outer diameter: ⌀32,⌀40,⌀50
·Number of Flutes: 2 flutes
·Compatible tip: TP□N32 type, TP□N43 type
Days to Ship: | 8 Day(s) or more |
---|
PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type
OSG
The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.
Days to Ship: | 8 Day(s) or more |
---|
FUJIGEN
With multiple blades, high feed and high-speed cutting are possible.
[Features]
· The tip can be selected from three types of nose radius (R0.2, R0.4, R0.8) and has 4 usable corners to reduce cost.
Days to Ship: | 8 Day(s) or more |
---|
SEC-Wave Multifunctional, Standard Type WMM2000E
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Days to Ship: | 8 Day(s) or more |
---|
Used for SEC-Wave Mill, WEX Model WEX-E
SUMITOMO ELECTRIC HARDMETAL
Increased precision of cutting edge reinforced low-resistance tip and cutting blade, high-durability body, plentiful tip variations, and air holes in all models.
Days to Ship: | 8 Day(s) or more |
---|
Used for SEC-Wave Mill, WFX Model WFXF-R
SUMITOMO ELECTRIC HARDMETAL
Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.
Days to Ship: | 8 Day(s) or more |
---|
ASAHI TOOLS
Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arbor
Days to Ship: | 11 Day(s) or more |
---|
SANDVIK
Light cutting face mill suitable for high-speed finishing
[Features]
Tool is designed with a serrated tip interface for increased stability and reduced run-out
Days to Ship: | 8 Day(s) or more |
---|
Multi-Functional Cutter, End Mill Model
MISUMI
[Features]
·6 types of processing are possible with 1 tool: grooving, side milling, plunge milling, slant milling, pocket milling and helical milling
·Easy tool management because only 1 type of tip is used for 1 tool
·Machining of various work materials such as stainless steel, steel alloy and aluminum is possible
·Since tips and accessories are shared with MKEM/MKKT, tool management is easier when used with cutter
Days to Ship: | 8 Day(s) or more |
---|
Finishing Ball Cutter, End Mill Model
MISUMI
[Features]
·Tip exchange type ball cutter end mill type holder for finish
·Shank material can be selected from steel and carbide according to application
·Outer diameter: ⌀8 to ⌀32
·Number of Flutes: 2 flutes
·Compatible tip: NFBM-8 to 32
Days to Ship: | 8 Day(s) or more |
---|
Shoulder Milling Cutter, Arbor Mounting Model
MISUMI
[Features]
·Blade tip replaceable arbor mounting type holder
·General purpose shoulder milling cutter using ISO insert
·Outer diameter: ⌀80,⌀100,⌀125
·Pitch: 5, 6, 8 flutes
·Compatible tip: TP□N43 type
Days to Ship: | 8 Day(s) or more |
---|
OSG
An economical cutter that does not waste the corners of the F3000 series inserts that are not used.
Days to Ship: | 2 Day(s) |
---|
F3042B SL F3000 Series Positive Mill Neo Shell Type
OSG
A shell type that uses a sharp, 3D breaker tip. Used with a face mill arbor.
Days to Ship: | 8 Day(s) or more |
---|
FUJIGEN
[Features]
· It has undergone innovative evolution. 2 types, a 3-flute type and a 6-flute type, also support high speed cutting.
· Machining diameter can be changed by exchanging the base; machining type can be changed by exchanging the arm.
· Multi-structure supports 3 types: NS (negative S type), PS (positive S type), NT (negative T type)
Days to Ship: | 8 Day(s) or more |
---|
SEC-Wave Repeater, WRX2000R Type
SUMITOMO ELECTRIC HARDMETAL
Optimizes cutting edge placement to realize low resistance and low vibration machining. Smooth chip discharge and high body rigidity are made possible by the lead groove and special pocket shape.
Days to Ship: | 8 Day(s) or more |
---|
SUMITOMO ELECTRIC HARDMETAL
[Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.
Days to Ship: | 8 Day(s) or more |
---|
RF4000 Type High-Speed Cutter for Aluminum
SUMITOMO ELECTRIC HARDMETAL
High-performance, lightweight cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.
Days to Ship: | 8 Day(s) or more |
---|
Aluminum Small Diameter Cutter, SRF Type
SUMITOMO ELECTRIC HARDMETAL
A small, high-performance cutter ideal for machining aluminum components on small-scale apparatus. Simple design with direct insert mounting. The simple fine adjustment mechanism maintains blade runout accuracy.
Days to Ship: | 8 Day(s) or more |
---|
SEC-Wave Mill Head WEX2000M Type
SUMITOMO ELECTRIC HARDMETAL
Supports a diverse combination of carbide arbors and steel arbors. Screw-fastened type enables easy switching.
Days to Ship: | 8 Day(s) or more |
---|
SEC-Wave Radius Mill WRCX Type WRCX08000E
SUMITOMO ELECTRIC HARDMETAL
Special surface processing dramatically improves life and reliability with the highly durable body. Uses a vibration-proof blade type design that is resistant to chatter.
Days to Ship: | 8 Day(s) or more |
---|
Used for SEC-Wave Mill, WFX Model WFXF-E
SUMITOMO ELECTRIC HARDMETAL
Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.
Days to Ship: | 8 Day(s) or more |
---|
Used for SEC-Wave Mill, WEX Model WEX-R
SUMITOMO ELECTRIC HARDMETAL
Special surface processing improves corrosion resistance and scratch resistance. Clamping strength and durability are improved by the increase in screw size.
Days to Ship: | 8 Day(s) or more |
---|
Used for SEC-Wave Mill, WGC Model WGCF-R
SUMITOMO ELECTRIC HARDMETAL
Achieves world class performance and machining precision as a general purpose cutter that is usable in a wide range of applications.
Days to Ship: | 8 Day(s) or more |
---|
SEC-Wave Multifunctional, Long Type WMM2000EL
SUMITOMO ELECTRIC HARDMETAL
Enables shoulder cutting and groove cutting with a single unit, as well as plunging. Ideal for high efficiency slope milling, helical drilling, and pocket machining.
Days to Ship: | 8 Day(s) or more |
---|
End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18
SANDVIK
● When in doubt, use this tool. Wide range of compatible applications and high performance
Tool diameter: ø9.7 to 200 mm, Maximum cutting depth: Up to 71 mm
Cylindrical shank, arbor mounting, anti-vibration type, lightweight type with additive manufacturing
Supports all types of machining processes and work materials with 17 long edge grades and 24 breakers
● 20% lower power than conventional products
The energy saving cutter contributes to power saving
Easy to use even on compact machines
● Supports face milling machine, shoulder milling, helical machining, and plunge machining
A versatile cutter that can do everything with just one unit, for which tailor-made (semi-standard product) is also available with short delivery times
●GC4330, GC4340
The steel-machining CVD grade is ideal for the versatile CoroMill 390
The Inveio coating provides excellent abrasion resistance and long tool lifespan
Days to Ship: | 8 Day(s) or more |
---|
Roughing Ball Cutter, End Mill Model
MISUMI
[Features]
·Easy to manage due to the main and secondary cutting edges composed by 1 type of insert
·A wide variety of small diameters from ø10
Days to Ship: | 8 Day(s) or more |
---|
Surface Processing Cutter DoPent TEN09
TUNGALOY
Screw clamp surface processing cutter
[Features]
· Cutting edge angle: 70°
· Uses pentagonal double-sided inserts
Days to Ship: | 12 Day(s) or more |
---|
F3038C BT F3000 Series Porcupine Neo Front Piece Replacement Type
OSG
Porcupine Neo-Cutter with a replaceable tip. Allows the cost of tools to be reduced.
Days to Ship: | 15 Day(s) |
---|
PRC Phoenix Series Round Cutter Screw-in Type
OSG
A screw-in type cutter. For side cutting, grooving, engraving, shape cutting, etc.
Days to Ship: | 8 Day(s) or more |
---|
PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type
OSG
The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.
Days to Ship: | 8 Day(s) or more |
---|
F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank
OSG
High rake type end mill with little cutting resistance. Enables high performance machining with deep cuts and high feed rates.
Days to Ship: | 8 Day(s) or more |
---|
F3040 F3000 Series Positive End Mill For Aluminum
OSG
An end mill type cutter that uses a sharp, 3D breaker tip. For aluminum, it enables high efficiency machining and multi-functional machining (helical machining, ramping, pocket machining, side machining, groove machining).
Days to Ship: | 2 Day(s) |
---|
F3000 Series, Positive Mill, Neo Straight Shank /F3042ASS
OSG
An end mill type that uses a sharp, 3D breaker tip. Addition of a 20 mm shank with multi-flute specification with a small tip that is convenient for small machines.
Days to Ship: | 8 Day(s) or more |
---|
F3000 Series, Positive Mill, Neo Straight Shank /F3042BSS
OSG
An end mill type that uses a sharp, 3D breaker tip. Various applicable chips are available.
Days to Ship: | 8 Day(s) or more |
---|
PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type
OSG
Threaded type for shoulder milling cutter. Dedicated holders support various machining depths.
Days to Ship: | 12 Day(s) or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Machining Application |
blade diameter D(φ) |
work material |
Finish category |
Overall length (L)(mm) |
Number of flutes(sheet) |
Mounting Method |
Shank diameter (d)(mm) |
Underneck length (ℓ1)(mm) |
Maximum Cutting Depth (Ad)(mm) |
Compatible Tip Material |
Brand | SANDVIK | MISUMI | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | ASAHI TOOLS | SANDVIK | SANDVIK | MISUMI | OSG | FUJIGEN | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | ASAHI TOOLS | SANDVIK | MISUMI | MISUMI | MISUMI | OSG | OSG | FUJIGEN | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANDVIK | MISUMI | TUNGALOY | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type | End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18 | F3038C BT F3000 Series Porcupine Neo Front Piece Replacement Type | PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type | F2133 SS Small Diameter Cutter Series, Cyclone Cutter, Straight Shank | PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type | |||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 11 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 2 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 15 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 2 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more |
Machining Application | Plane / Side / Groove | Plane / Chamfer | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side | Plane / Side / Groove | Groove | Groove | Side / Groove | Plane / Side / Groove | Plane / Side | Plane / Side / Groove / Vertical | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | - | Side / Groove / Inclined Cuts | Inclined Cuts | Side / Groove | Plane | Side / Groove | Plane / Side | Plane / Side / Groove | Side / Groove | Plane | Plane / Side | Plane / Side / Groove | Plane / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Groove / Chamfer | Plane / Side / Groove / Vertical | Plane / Side / Groove | Inclined Cuts | Plane | Side | Side / Groove / Vertical | Plane / Side / Groove / Vertical | Plane / Chamfer | Side / Groove / Vertical | Side / Groove | Side / Groove | Plane / Side / Groove |
blade diameter D(φ) | 80mm ~ 160mm | 32 | 14 ~ 63 | 40mm ~ 250mm | 40 ~ 63 | 40 ~ 63 | 63mm ~ 160mm | 50 ~ 100 | 12mm ~ 50mm | 10 mm ~ 32 mm | 40 | 16 ~ 63 | 20 ~ 50 | 20 ~ 30 | 25 ~ 63 | 50 ~ 200 | 50 ~ 100 | 40 mm ~ 80 mm | 26 | 10 ~ 16 | 125 | 50 ~ 80 | 50 | 100 ~ 130 | 40 ~ 50 | 16 ~ 80 | 80 ~ 200 | 30 ~ 63 | 16 ~ 40 | 20 ~ 25 | 50 ~ 80 | 80 ~ 125 | 80 ~ 200 | 20 ~ 30 | 40 ~ 84 | 16 ~ 25 | 100 ~ 160 | 50 ~ 80 | 10 ~ 30 | 10 ~ 88 | 63 | 20 ~ 40 | 20 | 32 ~ 63 | 16 ~ 40 |
work material | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum |
Finish category | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing / Finishing | Rough and medium rough processing | Rough and medium rough processing | Finishing | - | Finishing | Finishing | Rough and medium rough processing | - | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | - | Finishing | Rough and medium rough processing | Finishing | Rough and medium rough processing | - | - | Finishing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | Rough and medium rough processing | - | - | - | - | - | - | - | - | - |
Overall length (L)(mm) | 50 ~ 63 | 125 | 80 ~ 180 | - | - | - | 40 ~ 63 | - | 91 ~ 257 | - | 160 | 90 ~ 190 | 100 ~ 105 | 130 ~ 150 | 120 ~ 220 | - | 60 ~ 110 | - | 220 | 123 ~ 132 | - | 120 ~ 135 | 40 | 123.5 | - | 100 ~ 160 | - | - | 42 ~ 63 | 130 ~ 180 | 120 | - | - | 185 ~ 230 | - | 200 ~ 250 | 50 ~ 63 | 245 ~ 290 | 33 ~ 40 | 40 ~ 250 | 120 | 130 ~ 200 | 100 | 150 ~ 200 | 27 ~ 40 |
Number of flutes(sheet) | 7 ~ 12 | 3 | 1 ~ 8 | 4 ~ 16 | - | 4 ~ 6 | 5 ~ 10 | 6 ~ 10 | 2 | 2 | 2 | 2 ~ 6 | 2 ~ 5 | 3 ~ 5 | 2 ~ 6 | 4 ~ 16 | 6 ~ 10 | 3 ~ 6 | 4 | 1 | 8 | 3 ~ 5 | 5 | 3 ~ 6 | 10 ~ 16 | 1 ~ 4 | 6 ~ 12 | 3 ~ 6 | 2 ~ 6 | 2 ~ 3 | 4 ~ 6 | 4 ~ 6 | 8 ~ 20 | 3 ~ 5 | 3 ~ 6 | 2 | 5 ~ 12 | 3 ~ 4 | 2 ~ 4 | 2 ~ 10 | 5 | 1 ~ 2 | 3 | 3 ~ 4 | 2 ~ 6 |
Mounting Method | Arbor | Centering Plug | With handle | Arbor | Arbor | Arbor | Arbor | Arbor | With handle | Centering Plug | With handle | With handle | With handle | With handle | With handle | Arbor | Arbor | Centering Plug | With handle | With handle | Arbor | With handle | Arbor | With handle | Arbor | With handle | Arbor | Arbor | Centering Plug | With handle | With handle | Arbor | Arbor | With handle | Centering Plug | With handle | Arbor | With handle | Centering Plug | With handle / Arbor | With handle | With handle | With handle | With handle | Centering Plug |
Shank diameter (d)(mm) | 25.4 ~ 50.8 | 32 | 16 ~ 32 | 16 ~ 60 | - | - | 22 ~ 40 | - | 20 ~ 50 | - | 32 | 16 ~ 32 | - | 20 ~ 25 | 20 ~ 42 | - | - | 22 ~ 44 | 25 | 12 ~ 16 | - | 32 ~ 42 | - | - | - | 16 ~ 32 | - | - | 8.5 ~ 17 | 20 ~ 25 | 32 | - | - | 20 ~ 25 | - | 20 ~ 32 | - | - | - | 20 ~ 42 | 32 | 20 ~ 32 | 20 | 32 | - |
Underneck length (ℓ1)(mm) | - | 40 | 25 ~ 60 | - | - | - | - | - | 20 ~ 145 | 18 ~ - | - | 25 ~ 90 | - | 35 ~ 50 | 25 ~ 80 | - | - | - | 40 | - | - | 40 ~ 50 | - | - | - | 25 ~ 45 | - | - | 25 ~ 40 | 50 ~ 100 | 30 | - | - | 35 ~ 75 | 38 ~ 100 | 27 ~ 40 | 50 ~ 63 | - | - | 50 ~ 120 | 45 | 40 ~ 80 | 30 | 45 | - |
Maximum Cutting Depth (Ad)(mm) | 15.4 ~ 15.7 | - | 10 | 5.5 ~ 10 | 10 | 14 | - | - | 10.8 ~ 44.6 | 8.6 ~ 28.6 | 19 | - | - | 17~35 | 14 | 10 | - | - | - | - | - | - | - | - | 18~36 | 8 ~ 16 | 3 (When using Sumidia Indexable Inserts), 10 (When using super hard tip) | 5 | 10 | 4 | 10 | 14 | 6 | 17 ~ 35 | 15.4 | 14.4 ~ 22.3 | 6.4 | - | - | - | - | 15 | - | - | - |
Compatible Tip Material | Carbide Coat | Carbide Coat | - | Carbide Coat | - | - | Carbide Coat | - | Carbide Coat | Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | - | - | - | - | Carbide Coat | Carbide Coat | Carbide Coat | - | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | - | - | - | - | - | - | - | - | - | - | Carbide Coat | Carbide Coat | Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat / Cermet | Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat | Carbide Coat / No Carbide Coat |
Loading...
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy