(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Turning Inserts（Breaker Use：Medium grinding）
[What is turning?]
A shape is created by rotating the work material and cutting the surface while pressing the cutting edge. Processing methods can be divided into outer diameter processing, threading, inner diameter processing, and cut-off processing. The model numbers written on the insert and holder are codes unique to each tool manufacturer. Understanding how to read the model number provides basic information such as shape, type, and size. In many cases, cutting conditions are written on the label of the insert case, so check it before use.
| Days to Ship |
|
|---|
-
Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 4
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
SANDVIK
[Features]
· Carbide insert with precision-class coating for machining mixed work outer diameters and general inner diameters
· Diamond-shaped 80° insert
· Negative insertDays to Ship: 8 Day(s) or more -
M-Class Insert 55°, DN With Hole, ○○-Type DNMG-GK
MITSUBISHI MATERIALS
[Features]
· For medium cutting.Days to Ship: Quote -
Days to Ship: 8 Day(s) or more -
M Class Insert (with MA Breaker) CNMG○○○-MA
MITSUBISHI MATERIALS
Achieves thread machining with increased precision.
Days to Ship: 12 Day(s) or more -
Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· Wear-resistant, general-purpose breaker with low resistance.Days to Ship: 8 Day(s) or more -
MITSUBISHI MATERIALS
[Specifications]
・Breaker symbol: none
・Shape: T (triangle)
・Groove
・Hole: N (no hole)
・Relief angle: positive 11° (P)
・Use (breaker): rough cutting[Grade features]
・HTi05T is a general cutting hard alloy grade in cast iron.
· HTi10 is
for general cutting of cast iron, non-ferrous metals, heat-resistant alloys and titanium alloys. (Guidelines for cutting conditions)
・MC5005/MC5015 are insert grades that are especially suitable for trending high-speed machining as the first recommended grade for turning cast iron that is widely used mainly in automobiles and construction machinery.
· NX2525 is
a cermet grade for turning steel and cast iron.
· UC5105 is
a CVD coated grade for high-speed cutting of normal cast iron and ductile cast iron.
· UC5115 is a
CVD coated grade for normal cast iron and ductile cast iron cutting.
・UE6020 is for unstable cutting of steel. (Guidelines for cutting conditions)
・UE6110 is a CVD-coated grade for turning various types of steel such as mild steel, carbon steel, bearing steel, and leadless steel.
· UP20M is a grade for processing steel and stainless steel.
· UTi20T is
a general-purpose cemented carbide grade that can be used with both steel and cast iron.
· VP15TF is a heat-resistant alloy that is difficult to cut and is a high-strength ultra-fine grain cemented carbide grade for turning in unstable cutting areas that require fracture resistance.Days to Ship: Quote -
M Class Insert (with MP Breaker) WNMG○○○-MP
MITSUBISHI MATERIALS
Achieves reliable control even with latter-half materials that have easily elongated chips
Days to Ship: Quote -
M Class Insert (with MW Breaker) WNMG○○○-MW
MITSUBISHI MATERIALS
Achieves reliable control even with latter-half materials that have easily elongated chips
Days to Ship: Quote -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 4
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
Square 90°, Negative, with Hole SNMG1204○○-PQ "Finishing to Semi-Finishing"
KYOCERA
[Specifications]
· Shape: S (Quadrilateral)
· Number of Available Corners: 8
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
60° Triangle Negative with Hole TNMG16○○HQ "Finishing to Medium"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 6
· Rake Angle: Negative
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
Kyocera Turning Insert TN620 Cermet
KYOCERA
[Features]
· TN620: Special reinforcing technology (hybrid technology) achieves both superior fracture resistance and wear resistance.
· Achieves stable machining of steel and an excellent finished surface.
[Applications]
· For lathe turning
· TN620: The foremost recommended cermet for steel machiningDays to Ship: 12 Day(s) -
M-Class Insert 80°, CN With Hole, ○○-Type CNMG-MK
MITSUBISHI MATERIALS
[Features]
· For medium cutting.Days to Ship: Quote -
C Type Rhombus 80° / Negative with Hole / CNMG120408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Days to Ship: 16 Day(s) or more -
80° Diamond-Shape With Hole, Negative, CNMG-EG, For Medium Cutting
SUMITOMO ELECTRIC HARDMETAL
[Features]
· General-purpose breaker featuring both high chip control as well as damage resistance.Days to Ship: 8 Day(s) or more -
M Class Insert (with MA Breaker) DNMG○○○○○○-MA
MITSUBISHI MATERIALS
Achieves thread machining with increased precision.
Days to Ship: Quote -
M Class Insert (with MP Breaker) CNMG-MP
MITSUBISHI MATERIALS
Achieves reliable control even with latter-half materials that have easily elongated chips
Days to Ship: Quote -
KYOCERA
[Work materials]
· Carbon steel and alloy steel
· Gray Cast Iron and Ductile Cast Iron
[Insert Grade]
· CVD coating (CA515, CA525, CA5505, CA5515, CA5525, CA5535)Days to Ship: 8 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: C (80° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
KYOCERA
[Specifications]
· Shape: D (55° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
60° Triangle Positive without Hole TPMR "Medium Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Available Corners: 3
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: Medium CuttingDays to Ship: 8 Day(s) or more -
Diamond Shape 35° / Positive With Hole VBGT
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingDays to Ship: 8 Day(s) or more -
Diamond Shape 35° / Positive With Hole VCMT
KYOCERA
[Specifications]
· Shape: V (35° Rhombus)
· Number of Available Corners: 2
· Rake Angle: Positive
· Handedness: No handedness
[Applications]
· Machining Applications: For Outer Diameter / Inner Diameter
· Breaker Application: FinishingDays to Ship: 8 Day(s) or more -
Kyocera Insert for Turning, Cermet TN60
KYOCERA
[Features]
· TN60: Cermet standard with superior fracture resistance and wear resistance.
· Wide coverage from finishing to rough machining of steel.
[Applications]
· For lathe turning
· TN60: Wide coverage from finishing to rough machining of steelDays to Ship: Quote -
Kyocera Turning Insert PV720 PVD Cermet
KYOCERA
[Features]
· PV720: MEGACOAT NANO coating uses special reinforcing technology (hybrid technology) on cermet substrate to achieve both superior fracture resistance and wear resistance.
· Realizes both high-efficiency machining and a high-grade finished surface.
[Applications]
· For lathe turning
· PV720: The foremost recommended PVD cermet for steel machiningDays to Ship: 12 Day(s) -
W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Days to Ship: 16 Day(s) or more -
S Type Square 90°, Negative with Hole SNMG120408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Days to Ship: 16 Day(s) or more -
T Type Triangle 60° / Negative with Hole / TNMG160408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Days to Ship: 16 Day(s) or more -
D Type Rhombus 55° / Negative with Hole / DNMG150408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Days to Ship: 16 Day(s) or more -
V Type Rhombus 35° / Negative with Hole / VNMG160408-MTM20 "Intermediate Cutting"
MISUMI
[Features]
· Supports a wide range of work materials such as general steel, stainless steel and cast iron
· Provides extraordinary chipping resistance and long service life in general steel, intermediate cutting and intermittent machining
[Applications]
· Primarily recommended for general steel, intermediate cutting and intermittent machining.
· It exhibits chipping resistance in intermittent machining and versatility in cutting materials other than steel as well.
· It can be used in a wide range of fields.- Volume Discount
Days to Ship: 16 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Blade Tip Replacement Tip C (80°Diamond) CNMA
SUMITOMO ELECTRIC HARDMETAL
[Specifications]
·Chip Breaker Symbol: None
·Shape: C (80° rhombus)
· Groove
·Holes: A (With holes)
· Relief angle: Negative 0° (N)
· Applications (chip breaker): Medium cutting [Grade Features]
·AC410K is a general-purpose grade with an excellent balance of wear resistance and abrasion resistance.
·AC700G is a grade focusing on abrasion resistance that can be used for high to medium-speed cutting.
·BN250 is a general-purpose grade that has optimized CBN sintered compact composition and improved a balance of abrasion resistance and wear resistance.
·BN700 is one of grades that have the highest hardness and toughness in the SUMIBORON series, and has balanced abrasion resistance and wear resistance when cutting sintered alloys and cast iron, etc.Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| work material |
| Application |
| Available corners |
| Breaker Use |
| Rake angle |
| Nose R |
| Selfishly |
| Groove Width (For Grooving / Plunging) |
| Pitch (for Threading) |
| O.D./ I.D. (For Threading) |
| Screw Types (for threading) |
| Number of threads (for threading) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | SANDVIK | MITSUBISHI MATERIALS | SUMITOMO ELECTRIC HARDMETAL | MITSUBISHI MATERIALS | SUMITOMO ELECTRIC HARDMETAL | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | MITSUBISHI MATERIALS | MISUMI | SUMITOMO ELECTRIC HARDMETAL | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing" | Square-Shape With Hole, Negative, SNMG-GU, For Medium Cutting | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○HQ "for Finishing to Intermediate Cutting" | Square 90°, Negative, with Hole SNMG1204○○-PQ "Finishing to Semi-Finishing" | 60° Triangle Negative with Hole TNMG16○○HQ "Finishing to Medium" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | C Type Rhombus 80° / Negative with Hole / CNMG120408-MTM20 "Intermediate Cutting" | 80° Diamond-Shape With Hole, Negative, CNMG-EG, For Medium Cutting | Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | W Type Hexagon 80° / Negative with Hole / WNMG080408-MTM20 "Intermediate Cutting" | S Type Square 90°, Negative with Hole SNMG120408-MTM20 "Intermediate Cutting" | T Type Triangle 60° / Negative with Hole / TNMG160408-MTM20 "Intermediate Cutting" | D Type Rhombus 55° / Negative with Hole / DNMG150408-MTM20 "Intermediate Cutting" | V Type Rhombus 35° / Negative with Hole / VNMG160408-MTM20 "Intermediate Cutting" | |||||||||||||||||||||||||||||
| Days to Ship | 8 Day(s) or more | 8 Day(s) or more | Quote | 8 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | Quote | Quote | Quote | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) | Quote | 16 Day(s) or more | 8 Day(s) or more | Quote | Quote | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | Quote | 12 Day(s) | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more |
| Shape | S (Rectangular) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | C (80° Diamond-Shape) | S (Rectangular) | T (Triangle) | W (Hexagonal Type) | W (Hexagonal Type) | D (55° Diamond-Shape) | S (Rectangular) | T (Triangle) | C (80° Diamond-Shape) | - | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | - | - | W (Hexagonal Type) | S (Rectangular) | T (Triangle) | D (55° Diamond-Shape) | V (35° Diamond-Shaped) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | C (80° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | D (55° Diamond-Shape) | R (Circular) | S (Rectangular) | S (Rectangular) | S (Rectangular) |
| work material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron | Steel | Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | - | Cast Iron | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Cast Iron | Steel | Steel | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy | - | - | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron / High Hardness Material | Cast Iron / Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy / High Hardness Material | Cast Iron | Cast Iron | Heat-resistant alloy, titanium alloy | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy | Cast Iron / Non-ferrous metal | Steel / Stainless Steel / Cast Iron / Non-ferrous metal / Heat-resistant alloy, titanium alloy |
| Application | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | - | - | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter | Outer Diameter/Inner Diameter |
| Available corners | 4 | 4 | - | - | - | - | - | - | - | 4 | 8 | 6 | 2 | - | - | 4 | - | - | - | 4 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 2 | - | - | 6 | 8 | 6 | 4 | 4 | - | - | - | - | - | - | - | - | - | - |
| Breaker Use | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding | Medium grinding |
| Rake angle | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Negative | Negative | Negative | Negative | Pozidriv | - | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | Pozidriv | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Pozidriv | Negative | Pozidriv | Pozidriv |
| Nose R | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.8 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.2 ～ 0.8 | - | 0.4 ～ 1.6 | 0.8 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.8 ～ 1.2 | 0.8 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ Other | 0.2 ～ 0.4 | - | - | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.4 ～ 1.2 | 0.8 ～ 1.6 | 0.4 ～ 1.6 | 0.4 ～ 0.8 | 0.8 ～ 1.2 | 0.4 ～ 1.2 | - | 0.4 ～ Other | 0.4 | 0.4 ～ 1.2 |
| Selfishly | No-hand | No-hand | - | - | - | No-hand | - | - | - | No-hand | No-hand | No-hand | No-hand | - | - | No-hand | No-hand | - | - | No-hand | No-hand | Right-hand / Left-hand | No-hand | No-hand | Right-hand / Left-hand / No-hand | No-hand | Right-hand / Left-hand | No-hand | - | - | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | No-hand | - | - | - | - | - | - | - |
| Groove Width (For Grooving / Plunging) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (for Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D./ I.D. (For Threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Screw Types (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of threads (for threading) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond-Shape)
- D (55° Diamond-Shape)
- R (Circular)
- S (Rectangular)
- T (Triangle)
- V (35° Diamond-Shaped)
- W (Hexagonal Type)
- Other
-
work material
- Steel
- Stainless Steel
- Cast Iron
- Non-ferrous metal
- Heat-resistant alloy, titanium alloy
- High Hardness Material
-
Application
- Outer Diameter/Inner Diameter
- Grooving / Parting
- Threading
- Other
-
Available corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Breaker Use
- Finish
- Medium grinding
- Medium to deep grinding
- Heavy cutting
- Light Cutting
- Rough cutting
- Medium to coarse grinding
-
Rake angle
- Negative
- Pozidriv
-
Nose R
-
Selfishly
-
Groove Width (For Grooving / Plunging)
-
Pitch (for Threading)
-
O.D./ I.D. (For Threading)
-
Screw Types (for threading)
-
Number of threads (for threading)
Narrow search by specifying Manufacturer
-
- KYOCERA (172)
- SUMITOMO ELECTRIC HARDMETAL (59)
- MITSUBISHI MATERIALS (41)
- SANDVIK (10)
- TUNGALOY (0)
- ISCAR (0)
- MITSUBISHI HITACHI TOOL (0)
- SANWA SEISAKUSYO (0)
- WIDIA (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
- BIG DAISHOWA SEIKI (0)
- NGK SPARK PLUG (0)
- OSG (0)
CAD
-
- 2D
- 3D
Related Categories to Turning Inserts
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy