(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Holding Tools for O.D. Tuning(Selfishly:Right-hand)

Days to Ship
  • All
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  • 14 Day(s) or Less
  • 16 Day(s) or Less
  • 35 Day(s) or Less
Brand
Product Series
Days to Ship
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

    AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)

      SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)

        SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)

          SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)

            PDJN Type (External Diameter, Profiling)

              SEC-Outer Diameter Bit, MTXN Type

                SEC-D Type Tool Bit DDJN Type (Cutting Direction: Right)

                  SEC-70 Type Tool Bit PDJN Type (Cutting Direction: Right)

                    SWC-SV Type Mini Tool Holder SVLC Type (Cutting Direction: Right)

                      PCLN Type (External Diameter/End-Face Machining)

                        PTGN Type (Outer Diameter Machining)

                          PVPN Type (External Diameter, Copying/Undercutting)

                            Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S

                              Tool Bit for SEC-Solid Sumi Boron FN11

                                SEC-Mini Bit, SD Type (7° positive)

                                  SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)

                                    DWLN Type (External Diameter/End-Face Machining)

                                      ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)

                                        T-Max Shank Bit for Ceramic Tips

                                          CoroTurn RC Double Clamp, DSSNR/L

                                            Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L

                                              Tool Bit for SEC-Solid Sumi Boron FCLN

                                                SEC-Mini Bit, SBT Type

                                                  SEC-Outer Diameter Bit, ETXN Type

                                                    SEC-Wide Bit, SGW Type

                                                      T-REX Tool Bit DTR55C

                                                        SEC-D Type Bit, DWLN Type

                                                          SEC-30 Type Tool Bit ETGN Type (Cutting Direction: Right)

                                                            SEC-70 Type Tool Bit, PSBN Type

                                                              SEC-70 Type Tool Bit PTGN Type (Cutting Direction: Right)

                                                                SEC-D Type Tool Bit DVJN Type (Cutting Direction: Right)

                                                                  SUMIBORON, Round Insert Tool Bit, PRGN Type

                                                                    PDHN Type (External Diameter, End Face, Profiling)

                                                                      PSBN Type (Outer Diameter Machining)

                                                                        PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

                                                                          WWLN Type (outer diameter, end surface machining)

                                                                            SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder

                                                                              SDLC-FF Type (without Offset) (External Diameter / Profiling)

                                                                                SVLP-FF Type (not offset) (outer diameter, profile machining)

                                                                                  Tool Bit for Turning Processing

                                                                                    Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L

                                                                                      Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L

                                                                                        Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L

                                                                                          Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L

                                                                                            Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R/L170.5

                                                                                            Brand

                                                                                            KYOCERA

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            KYOCERA

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            SANDVIK

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            KYOCERA

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            Product Series

                                                                                            AVJB-FF Type (without Offset) (Outer Diameter Machining / Profiling)

                                                                                            SEC-M Type Tool Bit MTJN Type (Cutting Direction: Right)

                                                                                            SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)

                                                                                            SEC-SC Type Tool Bit SCLC Type (Cutting Direction: Right)

                                                                                            PDJN Type (External Diameter, Profiling)

                                                                                            SEC-Outer Diameter Bit, MTXN Type

                                                                                            SEC-D Type Tool Bit DDJN Type (Cutting Direction: Right)

                                                                                            SEC-70 Type Tool Bit PDJN Type (Cutting Direction: Right)

                                                                                            SWC-SV Type Mini Tool Holder SVLC Type (Cutting Direction: Right)

                                                                                            PCLN Type (External Diameter/End-Face Machining)

                                                                                            PTGN Type (Outer Diameter Machining)

                                                                                            PVPN Type (External Diameter, Copying/Undercutting)

                                                                                            Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SCLCR/L-S

                                                                                            Tool Bit for SEC-Solid Sumi Boron FN11

                                                                                            SEC-Mini Bit, SD Type (7° positive)

                                                                                            SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)

                                                                                            DWLN Type (External Diameter/End-Face Machining)

                                                                                            ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)

                                                                                            T-Max Shank Bit for Ceramic Tips

                                                                                            CoroTurn RC Double Clamp, DSSNR/L

                                                                                            Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR/L

                                                                                            Tool Bit for SEC-Solid Sumi Boron FCLN

                                                                                            SEC-Mini Bit, SBT Type

                                                                                            SEC-Outer Diameter Bit, ETXN Type

                                                                                            SEC-Wide Bit, SGW Type

                                                                                            T-REX Tool Bit DTR55C

                                                                                            SEC-D Type Bit, DWLN Type

                                                                                            SEC-30 Type Tool Bit ETGN Type (Cutting Direction: Right)

                                                                                            SEC-70 Type Tool Bit, PSBN Type

                                                                                            SEC-70 Type Tool Bit PTGN Type (Cutting Direction: Right)

                                                                                            SEC-D Type Tool Bit DVJN Type (Cutting Direction: Right)

                                                                                            SUMIBORON, Round Insert Tool Bit, PRGN Type

                                                                                            PDHN Type (External Diameter, End Face, Profiling)

                                                                                            PSBN Type (Outer Diameter Machining)

                                                                                            PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

                                                                                            WWLN Type (outer diameter, end surface machining)

                                                                                            SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder

                                                                                            SDLC-FF Type (without Offset) (External Diameter / Profiling)

                                                                                            SVLP-FF Type (not offset) (outer diameter, profile machining)

                                                                                            Tool Bit for Turning Processing

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L

                                                                                            Sandvik, T-Max P, Cutting Unit, Turning, MTJNR/L

                                                                                            Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L

                                                                                            Outer Diameter Turning - Tools For Compact Lathe, Shank Tool Bit, Short Tool Bit For QS Holding System, QS- SVABR/L

                                                                                            Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R/L170.5

                                                                                            Days to Ship 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more Quote 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                                            Applicable Tip ShapeV (35° Diamond-Shaped)T (Triangle)C (80° Diamond-Shape)C (80° Diamond-Shape)D (55° Diamond-Shape)T (Triangle)D (55° Diamond-Shape)D (55° Diamond-Shape)V (35° Diamond-Shaped)C (80° Diamond-Shape)T (Triangle)V (35° Diamond-Shaped)C (80° Diamond-Shape)S (Rectangular)D (55° Diamond-Shape)D (55° Diamond-Shape)W (Hexagonal Type)D (55° Diamond-Shape)R (Circular)S (Rectangular)W (Hexagonal Type)C (80° Diamond-Shape)OtherT (Triangle)OtherOtherW (Hexagonal Type)T (Triangle)S (Rectangular)T (Triangle)V (35° Diamond-Shaped)R (Circular)D (55° Diamond-Shape)S (Rectangular)R (Circular)W (Hexagonal Type)D (55° Diamond-Shape)D (55° Diamond-Shape)V (35° Diamond-Shaped)S (Rectangular)S (Rectangular)T (Triangle)S (Rectangular)V (35° Diamond-Shaped)-
                                                                                            Applicable Chip Clearance AnglePozidrivNegativeNegativePozidrivNegativeNegativeNegativeNegativePozidrivNegativeNegativeNegativePozidriv-PozidrivPozidrivNegativePozidriv-NegativeNegative--Negative--NegativeNegativeNegativeNegativeNegative-NegativeNegativeNegative / PozidrivNegativePozidrivPozidrivPozidriv-NegativeNegativeNegative-Negative
                                                                                            SelfishlyRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-handRight-hand
                                                                                            ApplicationOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / End FaceOuter Diameter / End FaceOuter Diameter / ProfilingOuter Diameter / End FaceOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / End FaceOuter DiameterOuter Diameter / End Face / ProfilingOuter Diameter / End Face / ChamferOuter DiameterOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / End FaceOuter Diameter / ProfilingOuter Diameter / Profiling / Post-GrindingOuter Diameter / End Face / ChamferOuter Diameter / End FaceOuter Diameter / End FacePost-GrindingOuter Diameter / End FaceOuter DiameterOuter Diameter / ProfilingOuter Diameter / End FaceOuter DiameterOuter DiameterOuter DiameterOuter Diameter / ProfilingOuter DiameterOuter Diameter / End Face / ProfilingOuter DiameterOuter Diameter / End Face / ProfilingOuter Diameter / End FaceOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / End Face / Profiling / ChamferEnd FaceOuter Diameter / Profiling / ChamferOuter DiameterOuter Diameter / ProfilingOuter Diameter / Profiling / Chamfer
                                                                                            Clamp ShapeBack Surface ClampDouble ClampCable clampScrew-onLever lockDouble ClampCable clampLever lockScrew-onLever lockLever lockPin LockClamp-onClamp-on-Screw-onCable clampBack Surface ClampClamp-onCable clampCable clampClamp-on-Pin Lock-Cable clampCable clampPin LockLever lockLever lockCable clampLever lockLever lockLever lockLever lockWedge LockScrew-onScrew-onScrew-onLever lockPin LockDouble ClampCable clampClamp-on-
                                                                                            Shank height(mm)-20 ~ 3220 ~ 258 ~ 2516 ~ 2520 ~ 2520 ~ 2520 ~ 3210 ~ 2516 ~ 3212 ~ 2520 ~ 25-258 ~ 208 ~ 2520 ~ 25-3232 ~ 4025 ~ 322510 ~ 2012 ~ 2512 ~ 1620 ~ 2520 ~ 2512 ~ 2516 ~ 3216 ~ 2520 ~ 2532---25------25 ~ 321240
                                                                                            Shank width(mm)-20 ~ 2520 ~ 258 ~ 2516 ~ 3220 ~ 2520 ~ 2520 ~ 3210 ~ 2516 ~ 3212 ~ 2520 ~ 25-258 ~ 208 ~ 2520 ~ 25-3625 ~ 4025 ~ 322510 ~ 2012 ~ 2512 ~ 1620 ~ 2520 ~ 2512 ~ 2516 ~ 3216 ~ 2520 ~ 2525---25------25 ~ 321225

                                                                                            Loading...

                                                                                            Related Categories to Holding Tools for O.D. Tuning