(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Holding Tools for O.D. Tuning(Page8)

Days to Ship
  • All
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
  • 20 Day(s) or Less
  • 28 Day(s) or Less
Brand
Product Series
Days to Ship
Applicable Tip Shape
Application
Clamp Shape
Selfishly
Applicable Chip Clearance Angle
Shank height(mm)
Shank width(mm)

    Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2

      Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2

        Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4

          Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4

            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4

              Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4

                Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4

                  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP

                    Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP

                      Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP

                        Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PCLNR/L-HP

                          Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PCRNR/L-HP

                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, High Pressure Coolant Specification, C-PSKNR/L-HP

                              Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDHNR/L

                                Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDJNR/L

                                  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDNNN

                                    Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L

                                      Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DRSNR/L

                                        Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSDNN

                                          Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSRNR/L

                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSSNR/L

                                              Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DVVNN

                                                Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DWLNR/L

                                                  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L

                                                    Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L

                                                      Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Wedge Clamp, MTJNR/L

                                                        Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Wedge Clamp, MWLNR/L

                                                          Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PCLNR/L

                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PCRNR/L

                                                              Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PDJNR/L

                                                                Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PRDCN

                                                                  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PSDNN

                                                                    Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PSSNR/L

                                                                      Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L

                                                                        Outer Diameter Turning - Tool Bit For Positive Inserts, Cutting Head, CoroTurn 107 Screw Clamp, SVHBR/L

                                                                          Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L

                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S

                                                                              Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SCLCR/L

                                                                                Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SDJCR/L

                                                                                  Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SDNCN

                                                                                    Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SVHBR/L

                                                                                      Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SVVBN

                                                                                        Outer Diameter Turning - Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S

                                                                                          Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CSSNR/L -4

                                                                                            Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CTGNR/L -4

                                                                                            Brand

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            SANDVIK

                                                                                            Product Series

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4

                                                                                            Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PSSNR/L-HP

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PCLNR/L-HP

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PCRNR/L-HP

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, High Pressure Coolant Specification, C-PSKNR/L-HP

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDHNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDJNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDNNN

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DRSNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSDNN

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSRNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DSSNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DVVNN

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DWLNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Wedge Clamp, MTJNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Wedge Clamp, MWLNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PCLNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PCRNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PDJNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PRDCN

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PSDNN

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, T-Max P Lever Clamp, PSSNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Cutting Head, CoroTurn 107 Screw Clamp, SVHBR/L

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn 107 Screw Clamp, SVJBR/L

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, CoroTurn TR Shank Tool Bit, TR-D13NCN-S

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SCLCR/L

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SDJCR/L

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SDNCN

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SVHBR/L

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Coromant Capto Cutting Head, CoroTurn 107 Screw Clamp, SVVBN

                                                                                            Outer Diameter Turning - Tool Bit For Positive Inserts, Shank Tool Bit, TR-V13JBR/L-S

                                                                                            Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CSSNR/L -4

                                                                                            Outer Diameter Turning, Coromant Capto, Cutting Head, CoroTurn RC Double Clamp For Ceramic Inserts, CTGNR/L -4

                                                                                            Days to Ship 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 15 Day(s) or more 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 9 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more 15 Day(s) or more
                                                                                            Applicable Tip ShapeS (Rectangular)S (Rectangular)S (Rectangular)S (Rectangular)S (Rectangular)S (Rectangular)S (Rectangular)D (55° Diamond-Shape)S (Rectangular)D (55° Diamond-Shape)C (80° Diamond-Shape)C (80° Diamond-Shape)S (Rectangular)D (55° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)R (Circular)S (Rectangular)S (Rectangular)S (Rectangular)V (35° Diamond-Shaped)W (Hexagonal Type)S (Rectangular)S (Rectangular)T (Triangle)W (Hexagonal Type)C (80° Diamond-Shape)C (80° Diamond-Shape)D (55° Diamond-Shape)R (Circular)S (Rectangular)S (Rectangular)C (80° Diamond-Shape)V (35° Diamond-Shaped)V (35° Diamond-Shaped)D (55° Diamond-Shape)C (80° Diamond-Shape)D (55° Diamond-Shape)D (55° Diamond-Shape)V (35° Diamond-Shaped)V (35° Diamond-Shaped)V (35° Diamond-Shaped)S (Rectangular)T (Triangle)
                                                                                            ApplicationOuter Diameter / Post-GrindingOuter Diameter / End Face / Profiling / ChamferOuter DiameterOuter DiameterOuter Diameter / End Face / Profiling / ChamferOuter DiameterOuter Diameter / End Face / Profiling / ChamferOuter DiameterOuter Diameter / End Face / Profiling / ChamferOuter Diameter / Profiling / ChamferOuter Diameter / End Face / ChamferOuter DiameterOuter Diameter / End Face / Post-GrindingOuter Diameter / ProfilingOuter Diameter / ProfilingOuter Diameter / Chamfer / Post-GrindingEnd FaceOuter Diameter / End Face / ProfilingOuter Diameter / Post-GrindingOuter DiameterOuter Diameter / End Face / Profiling / ChamferOuter Diameter / Profiling / Post-GrindingOuter Diameter / End FaceEnd FaceOuter DiameterOuter Diameter / Profiling / ChamferOuter Diameter / End FaceOuter Diameter / End Face / ChamferOuter DiameterOuter Diameter / Profiling / ChamferOuter Diameter / ProfilingOuter DiameterOuter Diameter / End Face / Profiling / ChamferOuter Diameter / End Face / ChamferOuter Diameter / Profiling / ChamferOuter Diameter / Profiling / ChamferOuter Diameter / Profiling / Post-GrindingOuter Diameter / End Face / ChamferOuter Diameter / End Face / ChamferOuter Diameter / Chamfer / Post-GrindingOuter Diameter / Profiling / ChamferOuter Diameter / Chamfer / Post-GrindingOuter Diameter / Profiling / Post-GrindingOuter Diameter / End Face / Profiling / ChamferOuter Diameter
                                                                                            Clamp ShapeCable clampCable clampClamp-onClamp-onClamp-onClamp-onClamp-onPin LockPin LockPin LockPin LockPin LockPin LockCable clampCable clampCable clampCable clampCable clampCable clampCable clampCable clampCable clampCable clampPin LockPin LockDouble ClampDouble ClampPin LockPin LockPin LockPin LockPin LockPin LockCable clampClamp-onClamp-onClamp-onClamp-onClamp-onClamp-onClamp-onClamp-onClamp-onClamp-on / Cable clampClamp-on
                                                                                            SelfishlyNo-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handNo-handNo-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handRight-hand / Left-handNo-handRight-hand / Left-handNo-handNo-handRight-hand / Left-handRight-hand / Left-hand
                                                                                            Applicable Chip Clearance Angle-------NegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativeNegativePozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidrivPozidriv--
                                                                                            Shank height(mm)---32-3232--------------------------40 ~ 50-----------
                                                                                            Shank width(mm)25252525252525--------------------------25 ~ 50-----------

                                                                                            Loading...

                                                                                            Related Categories to Holding Tools for O.D. Tuning