(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Grooving / Cutting Off Holders（Selfishly：Right-hand）
| Days to Ship |
|
|---|
-
SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type
SUMITOMO ELECTRIC HARDMETAL
Highly rigid design suppresses vibrations when cutting. Ideal for grooving, deep grooving, and cutting off.
Days to Ship: 10 Day(s) or more -
SEC-Grooved Bit (for inner diameter shallow groove) GWCI Type
SUMITOMO ELECTRIC HARDMETAL
[Features]
A GWCI-type SEC-grooving tool bit for inner diameter shallow grooving.
Inserts are shared with those for GWC.
[Cutting Direction]You can choose from 2 types, left-hand or right-hand.
[Applications]
Suitable for grooving, etc.Days to Ship: 10 Day(s) or more -
GY Modular Holder (Straight Holder of Outer Diameter of 00°)
MITSUBISHI MATERIALS
Holder for small lathes now added to the grooving tool "GY series"
Days to Ship: 8 Day(s) or more -
MITSUBISHI MATERIALS
2.0/2.5/3.0 mm blade types for end face machining now added to the grooving tool "GY series"
Days to Ship: 12 Day(s) -
Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)
KYOCERA
[Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge
Days to Ship: 10 Day(s) or more -
Days to Ship: 1 Day(s) or more -
SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type
SUMITOMO ELECTRIC HARDMETAL
High rigidity with double clamp (screw-on type for mini turning tools). The triangular type allows 3 corners to be used.
Days to Ship: 10 Day(s) or more -
Sumiboron Grooved Bite BNGG Type
SUMITOMO ELECTRIC HARDMETAL
The improved rigidity provides a longer lifetime. Clamp strength improvement eliminates insert fracture and holder chatter.
Days to Ship: 16 Day(s) or more -
Outer Diameter Shallow Groove Holder KGBA Type
KYOCERA
[Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.
- STOCK
Days to Ship: 16 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS-8 Type
KYOCERA
[Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: clamp-on (C)
Days to Ship: 16 Day(s) or more -
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](//id.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type
KYOCERA
A clamp-on type outer diameter shallow grooving holder.
[Shank Material]SteelDays to Ship: 16 Day(s) or more -
Inner Diameter Groove SIGE Type Compatible Chip
KYOCERA
B dimension: Indicates machinable groove depth.
Days to Ship: 8 Day(s) or more -
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)
KYOCERA
Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.
Days to Ship: 16 Day(s) or more -
Lathe Turning/Cutting Holder KGD Model (Combination)
KYOCERA
If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.
Days to Ship: 12 Day(s) or more -
T-Max Q-Cut Plunging/Grooving Shank Bit
SANDVIK
A parting-off and grooving tool that improves part production capacity by realizing high productivity and long tool lifespan
Days to Ship: 16 Day(s) or more -
SMGH SMG Tool Bit for Outer Diameter Grooving / Threading
MITSUBISHI MATERIALS
3-corner type grooving and threading holder. Outer circumference grinding type with excellent sharpness and high precision machining.
Days to Ship: 12 Day(s) -
SEC-Grooved Bit (for tip surface groove) GNDF Type
SUMITOMO ELECTRIC HARDMETAL
Its outstanding cutting chip handling performance and chattering resistance ensure machining.
For face grooving.Days to Ship: 12 Day(s) or more -
Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)
ISCAR
Diagonal screw clamp system achieves high rigidity and retention.
Days to Ship: 12 Day(s) or more -
Multi-Functional / Grooving Holder KGM Type
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Days to Ship: 16 Day(s) or more -
Multi-Functional / End Face Grooving Holder KFMS Type
KYOCERA
Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.
Days to Ship: 16 Day(s) or more -
KYOCERA
When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.
Days to Ship: 8 Day(s) or more -
KYOCERA
P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.
Days to Ship: 16 Day(s) or more -
Days to Ship: 16 Day(s) or more -
My-T G Series for Outer Diameter Grooving CGWS-W-L
TUNGALOY
For Outer Diameter Grooving Groove Width 3.0-5.0 mm, Integrated, No Offset
Days to Ship: 12 Day(s) or more -
SUMITOMO ELECTRIC HARDMETAL
Doubled tip clamp strength. There is little vibration during cutting. Intermittent machining is possible.
Days to Ship: 10 Day(s) or more -
Days to Ship: Quote -
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)
KYOCERA
4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.
Days to Ship: 16 Day(s) or more -
Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)
KYOCERA
If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.
Days to Ship: 16 Day(s) or more -
Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type
KYOCERA
A holder for the multi-function tool "TAKINOL" series.
For outer diameter grooving and face grooving.Days to Ship: 16 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Slit Tip (For Small Diameters) TKF Type
KYOCERA
[Features]
· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.Days to Ship: 8 Day(s) or more -
Days to Ship: 16 Day(s) or more -
Blade for Grooved End Face Holder
KYOCERA
This product can be used for various groove diameters by changing blades.
For face grooving holders.Days to Ship: 16 Day(s) or more -
My-T CGD Series for Outer Diameter Grooving CGWS-CGD
TUNGALOY
For Outer Diameter Grooving Groove Width 2.0-8.0 mm Vertical Type S
Days to Ship: 12 Day(s) or more -
My-T G Series for Outer Diameter Grooving CGWS-G
TUNGALOY
For Outer Diameter Grooving Groove Width 2.0-5.0 mm Vertical Type S
Days to Ship: 12 Day(s) -
My-T G Series for Outer Diameter Grooving CGWS-W
TUNGALOY
For Outer Diameter Grooving Groove Width 3.0-5.0 mm, Integrated, No Offset
Days to Ship: 12 Day(s) -
SGT Type Bite for Outer Diameter Grooving SGT
TUNGALOY
For Outer Diameter Grooving Groove Width 2.5-4.1 mm
Days to Ship: 12 Day(s) -
TUNGALOY
For Outer Diameter Cutting Grooving/Turning Groove Width 3.0 to 6.0 mm
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) -
My-T G Series for Inner Diameter Grooving CGT
TUNGALOY
For Inner Diameter Grooving Groove Width 3.0 to 5.0 mm
Days to Ship: 12 Day(s) -
SEC-Grooved Bit (for outer diameter L type lateral groove) GNDLS Type
SUMITOMO ELECTRIC HARDMETAL
Its outstanding cutting chip handling performance and chattering resistance ensure machining.
For outer diameter deep grooving and parting-off.Days to Ship: 16 Day(s) or more -
SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type
SUMITOMO ELECTRIC HARDMETAL
Its outstanding cutting chip handling performance and chattering resistance ensure machining.
For outer diameter multi-function machining.Days to Ship: 16 Day(s) or more -
SEC-Grooved Bit (for outer diameter L type shallow groove) GWCSI Type
SUMITOMO ELECTRIC HARDMETAL
The insert can be used for both the outer diameter and the inner diameter.
A tool bit for outer diameter grooving.Days to Ship: 16 Day(s) or more
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://id.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Application |
| Groove Width(mm) |
| Maximum Groove Depth(mm) |
| Selfishly |
| Maximum Machining Diameter(mm) |
| Number of corners for tip use |
| Shank height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | MITSUBISHI MATERIALS | MITSUBISHI MATERIALS | KYOCERA | KYOCERA | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | MITSUBISHI MATERIALS | SUMITOMO ELECTRIC HARDMETAL | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | TUNGALOY | SUMITOMO ELECTRIC HARDMETAL | ISCAR | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | KYOCERA | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | TUNGALOY | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL |
| Product Series | SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type | SEC-Grooved Bit (for inner diameter shallow groove) GWCI Type | GY Modular Holder (Straight Holder of Outer Diameter of 00°) | Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole) | SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type | Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type | Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole) | Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp) | Multi-Functional / Grooving Holder KGM Type (For Automatic Board) | Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type) | Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type | SEC-Grooved Bit (for outer diameter L type lateral groove) GNDLS Type | SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type | SEC-Grooved Bit (for outer diameter L type shallow groove) GWCSI Type | |||||||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) or more | 10 Day(s) or more | 8 Day(s) or more | 12 Day(s) | 10 Day(s) or more | 1 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 10 Day(s) or more | Quote | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) | 12 Day(s) | 12 Day(s) | 12 Day(s) or more | 12 Day(s) or more | 12 Day(s) | 12 Day(s) | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Application | Outer Diameter Grooving / Cutting off | Inner Diameter Grooving | Outer Diameter Grooving | Outer Diameter Grooving | - | - | Outer Diameter Grooving | Outer Diameter Grooving / Inner Diameter Grooving | - | - | - | - | - | - | Outer Diameter Grooving / Cutting off / Profiling | Outer Diameter Grooving | Edge surface grooving | Outer Diameter Grooving / Cutting off | - | Edge surface grooving | - | - | Edge surface grooving / Horizontal feeding | Outer Diameter Grooving | Cutting off | Outer Diameter Grooving / Cutting off | - | - | - | - | - | - | Outer Diameter Grooving / Cutting off / Profiling | - | Outer Diameter Grooving | Outer Diameter Grooving | Outer Diameter Grooving | Outer Diameter Grooving | Outer Diameter Grooving | Outer Diameter Grooving | Outer Diameter Grooving | Inner Diameter Grooving | Outer Diameter Grooving / Horizontal feeding | Outer Diameter Grooving / Horizontal feeding / Profiling | Outer Diameter Grooving |
| Groove Width(mm) | 2 ～ 6 | 0.5～2.80 ～ 1.25～4.80 | - | - | - | - | 0.33～2.8 ～ 2.5 to 4.8 | 2 ～ 10～3.0 | - | - | - | - | - | - | 2.5 ～ 3 | 0.3-1.3 | 3 ～ 6 | 1.0/2.0/2.2 ～ 1.0/3.0/3.1 | - | 3 ～ 5(6) | - | - | 2.5 ～ 6 | 2 ～ 5 | 2 ～ 5 | 8 | - | - | - | - | - | - | 1.5 ～ 15 | - | 2 ～ 8 | 2 ～ 5 | 3 ～ 5 | 2.5～4.1 | 3 ～ 6 | 3 ～ 6 | - | 3 ～ 5 | 2 ～ 6 | 3 ～ 6 | 0.33～2.8 ～ 2.5 to 4.8 |
| Maximum Groove Depth(mm) | 20 ～ 25(23) | 2 ～ 2.5 | - | 1.5 ～ 3.5 | - | - | 2 ～ 5 | 4 ～ 7 | - | - | - | - | - | - | 20 | - | 12 ～ 23 | - | - | - | - | - | 12 ～ 18 | 15 ～ 21.5 | - | - | - | - | - | - | - | - | 8 ～ 50 | - | 16 ～ 21.6 | 12 | 12 ～ 13 | 3 | 16 ～ 20 | 12 ～ 25 | - | 3.5 ～ 6 | 16 ～ 23 | 10 ～ 14 | 2 ～ 5 |
| Selfishly | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand | Right-hand |
| Maximum Machining Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 ～ 1000 | 35 | - | 30 ～ ∞ | - | - | 44 ～ 1000 | - | 28 ～ 70 | 120 | - | - | - | - | - | - | - | - | 35 ～ 50 | - | - | - | - | 55 ～ ∞ | - | - | - | - | - |
| Number of corners for tip use | 2 Corner | 3 Corner | - | - | - | - | 3 Corner | 1 Corner | - | - | - | - | - | - | 1 Corner | 3 Corner | 2 Corner | 1 Corner | - | - | - | - | 2 Corner | 2 Corner | 1 Corner | 1 Corner | - | - | - | - | - | - | 1 Corner / 2 Corner | - | 2 Corner | 1 Corner | 2 Corner | 3 Corner | 1 Corner / 2 Corner | 2 Corner | 1 Corner | 1 Corner | 2 Corner | 2 Corner | 3 Corner |
| Shank height(mm) | 20 ～ 25 | φ25 ～ φ32 | - | - | - | - | 10 ～ 25 | 25 | - | - | - | - | - | - | 16 ～ 32 | 16 | 20 ～ 25 | 16 | - | 20 ～ 25 | - | - | - | 16 ～ 25 | 10 ～ 25 | 32 | - | - | - | - | - | - | 10 ～ 40 | - | - | 20 ～ 25 | 16 ～ 25 | - | - | - | - | - | 20 ～ 25 | 20 ～ 25 | 20 ～ 25 |
![Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type](http://id.misumi-ec.com/linked/material/fs/KYR1/PHOTO/223005303985.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Application
- Outer Diameter Grooving
- Inner Diameter Grooving
- Edge surface grooving
- Cutting off
- Horizontal feeding
- Profiling
-
Groove Width(mm)
- 0.3-1.3
- 0.33～2.8
- 0.5-3.18
- 0.5–2.0
- 0.50～2.00
- 0.5～2.80
- 0.5 to 3.18
- 0.7-2.0
- 1～1.45
- 1.00～2.00
- 1.0/2.0/2.2
- 1.0/3.0/3.1
- 1.25～4.80
- 1.4
- 1.5
- 1.50～2.00
- 1.5～2.3
- 1.5～4.4
- 1.6
- 2
- 2.2/2.4
- 2.5
- 2.5～4.1
- 2.5 to 4.8
- 2.65
- 3
- 3.1
- 3.17
- 4
- 4.0–5.0
- 4.1
- 4.6～6.0
- 4.75
- 4.8/5.1
- 5
- 5(6)
- 5.1
- 6
- 6.35
- 6.4
- 7
- 8
- 9.5
- 9.6
- 10
- 10～3.0
- 11
- 12
- 15
- 22/2.4
-
Maximum Groove Depth(mm)
- 0.8
- 1.5
- 1.75
- 1.8
- 2
- 2.5
- 2.8
- 2.88
- 3
- 3.5
- 3.5~5.0
- 4
- 4.5
- 4.6
- 5
- 5.1
- 5.1(4.6)
- 5.1(5.1)
- 5.3
- 5.6
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 7
- 7.6
- 8
- 8.1
- 8.1(6.6)
- 8.1(8.1)
- 8.2
- 8.5
- 8.69
- 8.7
- 9
- 9.5
- 10
- 10.69
- 10.7
- 11
- 11.6
- 12
- 13
- 14
- 14.5
- 15
- 16
- 16.5
- 17
- 17.5
- 17.6
- 18
- 19
- 19.5
- 20
- 20(18)
- 21
- 21.5
- 21.6
- 22
- 23
- 25
- 25(23)
- 29
- 30
- 32
- 33
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 100
- 120
-
Selfishly
-
Maximum Machining Diameter(mm)
-
Number of corners for tip use
-
Shank height(mm)
Narrow search by specifying Manufacturer
-
- KYOCERA (59)
- SANDVIK (40)
- SUMITOMO ELECTRIC HARDMETAL (14)
- TUNGALOY (12)
- ISCAR (6)
- MITSUBISHI MATERIALS (2)
- FUJI AIR TOOLS (1)
- NGK SPARK PLUG (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
Related Categories to Grooving / Cutting Off Holders
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy