(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Grooving / Cutting Off Holders

185 items

: 30; 45; 60

Days to Ship	All 1 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less 17 Day(s) or Less

1
2
3
4
5
Next >>

SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type

SUMITOMO ELECTRIC HARDMETAL

Highly rigid design suppresses vibrations when cutting. Ideal for grooving, deep grooving, and cutting off.

Days to Ship: 10 Day(s) or more
Lathe Turning (Cutter) Bit GDM Model

KYOCERA

Conventional insert mounting to new holders is not recommended.

Days to Ship: 8 Day(s) or more
GY Modular Blade

MITSUBISHI MATERIALS

2.0/2.5/3.0 mm blade types for end face machining now added to the grooving tool "GY series"

Days to Ship: 12 Day(s) or more
Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

KYOCERA

[Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge

Days to Ship: 10 Day(s) or more
GY Modular Holder (Straight Holder of Outer Diameter of 00°)

MITSUBISHI MATERIALS

Holder for small lathes now added to the grooving tool "GY series"

Days to Ship: 8 Day(s) or more
Outer Diameter Shallow Groove Holder KGBA Type

KYOCERA

[Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.

STOCK
Days to Ship: 1 Day(s) or more
Chip for Grooving

KYOCERA

The edge width tolerance of GB32$050 is different. (0.50 + 0.05 0)

Days to Ship: 1 Day(s) or more
T-Max Q-Cut Plunging/Grooving Shank Bit

SANDVIK

A parting-off and grooving tool that improves part production capacity by realizing high productivity and long tool lifespan

Days to Ship: 12 Day(s) or more
SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type

SUMITOMO ELECTRIC HARDMETAL

High rigidity with double clamp (screw-on type for mini turning tools). The triangular type allows 3 corners to be used.

Days to Ship: 10 Day(s) or more
SEC-Grooved Bit (for inner diameter shallow groove) GWCI Type

SUMITOMO ELECTRIC HARDMETAL

[Features]
A GWCI-type SEC-grooving tool bit for inner diameter shallow grooving.
Inserts are shared with those for GWC.
[Cutting Direction]You can choose from 2 types, left-hand or right-hand.
[Applications]
Suitable for grooving, etc.

Days to Ship: 10 Day(s) or more
Sumiboron Grooved Bite BNGG Type

SUMITOMO ELECTRIC HARDMETAL

The improved rigidity provides a longer lifetime. Clamp strength improvement eliminates insert fracture and holder chatter.

Days to Ship: 16 Day(s) or more
Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type

KYOCERA

A clamp-on type outer diameter shallow grooving holder.
[Shank Material]Steel

Days to Ship: 16 Day(s) or more
Inner Diameter Groove SIGE Type Compatible Chip

KYOCERA

B dimension: Indicates machinable groove depth.

Days to Ship: 8 Day(s) or more
Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)

KYOCERA

Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

Days to Ship: 16 Day(s) or more
Lathe Turning/Cutting Holder KGD Model (Combination)

KYOCERA

If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

Days to Ship: 12 Day(s) or more
CoroCut 1/2 Plunging/Grooving Shank Bit

SANDVIK

Unique shape exhibits high performance

Days to Ship: 12 Day(s) or more
SMGH SMG Tool Bit for Outer Diameter Grooving / Threading

MITSUBISHI MATERIALS

3-corner type grooving and threading holder. Outer circumference grinding type with excellent sharpness and high precision machining.

Days to Ship: 12 Day(s)
SEC-Grooved Bit (for tip surface groove) GNDF Type

SUMITOMO ELECTRIC HARDMETAL

Its outstanding cutting chip handling performance and chattering resistance ensure machining.
For face grooving.

Days to Ship: 10 Day(s) or more
Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)

ISCAR

Diagonal screw clamp system achieves high rigidity and retention.

Days to Ship: 12 Day(s) or more
Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip

KYOCERA

[Features]Carbide materials and Cermet materials are used, and some are coated with CVD and PVD coatings.

Days to Ship: 8 Day(s) or more
Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve

KYOCERA

[Specifications]·no cutting direction; lubrication hole (oil hole): yes; compatible sleeve: It can be used in combination with a holder to change the tool runout.

Days to Ship: 16 Day(s) or more
Multi-Functional / End Face Grooving Holder KFMS Type

KYOCERA

Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

Days to Ship: 16 Day(s) or more
Slit Tip GDM Type

KYOCERA

When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

Days to Ship: 8 Day(s) or more
CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2

SANDVIK

Unique shape exhibits high performance

Days to Ship: 16 Day(s) or more
My-T G Series for Outer Diameter Grooving CGWS-W-L

TUNGALOY

For Outer Diameter Grooving Groove Width 3.0-5.0 mm, Integrated, No Offset

Days to Ship: 12 Day(s) or more
Tsukkirukun Jr STFS Type

SUMITOMO ELECTRIC HARDMETAL

Doubled tip clamp strength. There is little vibration during cutting. Intermittent machining is possible.

Days to Ship: 10 Day(s) or more
Self Grip (T Cut) Blade for Plunging

ISCAR

When using T cut, the F cut and DO GRIP are recommended.

Days to Ship: 12 Day(s) or more
Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

KYOCERA

Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

Days to Ship: 8 Day(s) or more
Multi-Functional / Grooving Holder KGM Type (For Automatic Board)

KYOCERA

4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

Days to Ship: 16 Day(s) or more
Multi-Functional / Grooving Holder KGM Type

KYOCERA

4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

Days to Ship: 16 Day(s) or more
Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type

KYOCERA

A holder for the multi-function tool "TAKINOL" series.
For outer diameter grooving and face grooving.

Days to Ship: 16 Day(s) or more
Small Bore Slotting System Bar, Model VNG

KYOCERA

Solid type system bar.

Days to Ship: 8 Day(s) or more
Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip

KYOCERA

Clamp-on type large inner diameter deep grooving holder.

Days to Ship: 8 Day(s) or more
Lathe Turning Bit Compatible Bit

KYOCERA

B dimension: Indicates machinable groove depth.

Days to Ship: 8 Day(s) or more
Slit Tip (For Small Diameters) TKF Type

KYOCERA

[Features]
· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

Days to Ship: 8 Day(s) or more
Slit Tip GDG Type

KYOCERA

When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

Days to Ship: 8 Day(s) or more
Blade for Grooved End Face Holder

KYOCERA

This product can be used for various groove diameters by changing blades.
For face grooving holders.

Days to Ship: 16 Day(s) or more
My-T CGD Series for Outer Diameter Grooving CGWS-CGD

TUNGALOY

For Outer Diameter Grooving Groove Width 2.0-8.0 mm Vertical Type S

Days to Ship: 12 Day(s) or more
My-T G Series for Outer Diameter Grooving CGWS-G

TUNGALOY

For Outer Diameter Grooving Groove Width 2.0-5.0 mm Vertical Type S

Days to Ship: 12 Day(s) or more
My-T G Series for Outer Diameter Grooving CGWS-W

TUNGALOY

For Outer Diameter Grooving Groove Width 3.0-5.0 mm, Integrated, No Offset

Days to Ship: 12 Day(s) or more
SGT Type Bite for Outer Diameter Grooving SGT

TUNGALOY

For Outer Diameter Grooving Groove Width 2.5-4.1 mm

Days to Ship: 12 Day(s)
Outer Diameter Cutting CAER/L

TUNGALOY

For Outer Diameter Cutting Grooving/Turning Groove Width 3.0 to 6.0 mm

Days to Ship: 12 Day(s) or more
Outer Diameter Cutting CAFR/L

TUNGALOY

For End Face Grooving/Turning Groove Width 3.0-6.0 mm

Days to Ship: 8 Day(s) or more
Outer Diameter Cutting CGP

TUNGALOY

For Cutting Off/Deep Grooving Groove Width 1.4 to 8.0 mm

[Features]
· Clamps by widening the upper jaw with a CRW wrench.
· Reduces the blade load and extends the working life

Days to Ship: 12 Day(s) or more
Outer Diameter Cutting CHSR/L

TUNGALOY

Outer Diameter Cutting, Blade Holder

Days to Ship: 8 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)


Brand	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	MITSUBISHI MATERIALS	KYOCERA	MITSUBISHI MATERIALS	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	MITSUBISHI MATERIALS	SUMITOMO ELECTRIC HARDMETAL	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	TUNGALOY	SUMITOMO ELECTRIC HARDMETAL	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY	TUNGALOY
Product Series	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	Lathe Turning (Cutter) Bit GDM Model	GY Modular Blade	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	GY Modular Holder (Straight Holder of Outer Diameter of 00°)	Outer Diameter Shallow Groove Holder KGBA Type	Chip for Grooving	T-Max Q-Cut Plunging/Grooving Shank Bit	SEC-Grooved Bit (for outer diameter shallow groove) GWCI Type	SEC-Grooved Bit (for inner diameter shallow groove) GWCI Type	Sumiboron Grooved Bite BNGG Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type	Inner Diameter Groove SIGE Type Compatible Chip	Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)	Lathe Turning/Cutting Holder KGD Model (Combination)	CoroCut 1/2 Plunging/Grooving Shank Bit	SMGH SMG Tool Bit for Outer Diameter Grooving / Threading	SEC-Grooved Bit (for tip surface groove) GNDF Type	Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip	Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve	Multi-Functional / End Face Grooving Holder KFMS Type	Slit Tip GDM Type	CORO-TURN SL, Edge Grooving Blade for CoroCut 1/2	My-T G Series for Outer Diameter Grooving CGWS-W-L	Tsukkirukun Jr STFS Type	Self Grip (T Cut) Blade for Plunging	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Multi-Functional / Grooving Holder KGM Type (For Automatic Board)	Multi-Functional / Grooving Holder KGM Type	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type	Small Bore Slotting System Bar, Model VNG	Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip	Lathe Turning Bit Compatible Bit	Slit Tip (For Small Diameters) TKF Type	Slit Tip GDG Type	Blade for Grooved End Face Holder	My-T CGD Series for Outer Diameter Grooving CGWS-CGD	My-T G Series for Outer Diameter Grooving CGWS-G	My-T G Series for Outer Diameter Grooving CGWS-W	SGT Type Bite for Outer Diameter Grooving SGT	Outer Diameter Cutting CAER/L	Outer Diameter Cutting CAFR/L	Outer Diameter Cutting CGP	Outer Diameter Cutting CHSR/L
Days to Ship	10 Day(s) or more	8 Day(s) or more	12 Day(s) or more	10 Day(s) or more	8 Day(s) or more	1 Day(s) or more	1 Day(s) or more	12 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s)	10 Day(s) or more	12 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	12 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s)	12 Day(s) or more	8 Day(s) or more	12 Day(s) or more	8 Day(s) or more
Specifications						STOCK
Application	Outer Diameter Grooving / Cutting off	-	Outer Diameter Grooving	-	Outer Diameter Grooving	-	-	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving	Inner Diameter Grooving	Outer Diameter Grooving / Inner Diameter Grooving	-	-	-	-	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving	Edge surface grooving	Outer Diameter Grooving / Cutting off	-	-	Edge surface grooving	-	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving	Cutting off	Outer Diameter Grooving / Cutting off	-	-	-	-	-	-	-	-	-	-	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving
Groove Width(mm)	2 ～ 6	-	-	-	-	-	-	2 ～ 6	0.33～2.8 ～ 2.5 to 4.8	0.5～2.80 ～ 1.25～4.80	2 ～ 10～3.0	-	-	-	-	1.5 ～ 15	0.3-1.3	3 ～ 6	1.0/2.0/2.2 ～ 1.0/3.0/3.1	-	-	3 ～ 5(6)	-	2.5 ～ 6	2 ～ 5	2 ～ 5	2.2/2.4 ～ 22/2.4	-	-	-	-	-	-	-	-	-	-	2 ～ 8	2 ～ 5	3 ～ 5	2.5～4.1	3 ～ 6	3 ～ 6	1.4 ～ 8	-
Maximum Groove Depth(mm)	20 ～ 25(23)	-	1.5 ～ 14	-	-	-	-	15 ～ 32	2 ～ 5	2 ～ 2.5	4 ～ 7	-	-	-	-	8 ～ 50	-	12 ～ 23	-	-	-	-	-	12 ～ 18	15 ～ 21.5	-	-	-	-	-	-	-	-	-	-	-	-	16 ～ 21.6	12	12 ～ 13	3	16 ～ 20	12 ～ 25	-	-
Selfishly	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	12 ～ 28	-	-	-	-	-	-	-	-	-	-	-	-	-	-	45 ～ 1000	35	-	-	30 ～ ∞	-	44 ～ 1000	-	28 ～ 70	40 ～ 250	-	-	-	-	-	-	-	-	-	-	35 ～ 50	-	-	-	-	55 ～ ∞	25 ～ 120	-
Number of corners for tip use	2 Corner	-	-	-	-	-	-	1 Corner	3 Corner	3 Corner	1 Corner	-	-	-	-	1 Corner / 2 Corner	3 Corner	2 Corner	1 Corner	-	-	-	-	2 Corner	2 Corner	1 Corner	1 Corner	-	-	-	-	-	-	-	-	-	-	2 Corner	1 Corner	2 Corner	3 Corner	1 Corner / 2 Corner	2 Corner	1 Corner / 2 Corner	1 Corner
Shank height(mm)	20 ～ 25	-	-	-	-	-	-	16 ～ 32	10 ～ 25	φ25 ～ φ32	25	-	-	-	-	10 ～ 40	16	20 ～ 25	16	-	-	20 ～ 25	-	-	16 ～ 25	10 ～ 25	19 ～ 52.6	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25	16 ～ 25	-	-	-	-	-

1
2
3
4
5
Next >>

Configure

Specification/Dimensions

Application
Clear

Groove Width(mm)
0.3-1.3

0.33～2.8

0.5-3.18

0.5–2.0

0.50～2.00

0.5～2.80

0.5 to 3.18

0.7-2.0

1～1.45

1.00～2.00

1.0/2.0/2.2

1.0/3.0/3.1

1.25～4.80

1.4

1.5

1.50～2.00

1.5～2.3

1.5～4.4

1.6

2

2.2/2.4

2.5

2.5～4.1

2.5 to 4.8

2.65

3

3.1

3.17

4

4.0–5.0

4.1

4.6～6.0

4.75

4.8/5.1

5

5(6)

5.1

6

6.35

6.4

7

8

9.5

9.6

10

10～3.0

11

12

15

22/2.4
Clear

Maximum Groove Depth(mm)
0.8

1.5

1.75

1.8

2

2.5

2.8

2.88

3

3.5

3.5~5.0

4

4.5

4.6

5

5.1

5.1(4.6)

5.1(5.1)

5.3

5.6

6

6.2

6.3

6.4

6.5

6.6

7

7.6

8

8.1

8.1(6.6)

8.1(8.1)

8.2

8.5

8.69

8.7

9

9.5

10

10.69

10.7

11

11.6

12

13

14

14.5

15

16

16.5

17

17.5

17.6

18

19

19.5

20

20(18)

21

21.5

21.6

22

23

25

25(23)

29

30

32

33

35

40

45

50

55

60

65

100

120
Clear

Selfishly
Drawing

Clear

Maximum Machining Diameter(mm)
1

4

5~16

12

25

26

28

30

32

35

36

38

40

44

45

46

50

50（∞）

52

55

56

57

60

65

70

70（∞）

72

75

76

80

85

90

95

98

100

100（∞）

110

115

120

130

140

145

150

150（∞）

160

180

200

220

230

235

250

250（∞）

300

400

500

800

980

1000

∞
Clear

Number of corners for tip use
Images

Clear

Shank height(mm)
φ8

10

φ10

12

φ12

14

φ14

16

φ16

19

20

φ20

23

25

φ25

25.9

26

30

31.9

32

φ32

36

37

40

45.0

47

50.8

52.6

101.6
Clear

Narrow search by specifying Manufacturer

Clear

CAD

- 2D
- 3D
Clear

Related Categories to Grooving / Cutting Off Holders

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Grooving / Cutting Off Holders

Configure

Specification/Dimensions

Application

Groove Width(mm)

Maximum Groove Depth(mm)

Selfishly

Maximum Machining Diameter(mm)

Number of corners for tip use

Shank height(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Grooving / Cutting Off Holders

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Grooving / Cutting Off Holders

Configure

Specification/Dimensions

Application

Groove Width(mm)

Maximum Groove Depth(mm)

Selfishly

Maximum Machining Diameter(mm)

Number of corners for tip use

Shank height(mm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Grooving / Cutting Off Holders

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB