(!) Since support from Microsoft will end on January 14, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Penggunaan Window 7 tidak direkomendasikan pada website ini mulai tanggal 15 Desember 2019 dikarenakan support Windows 7 akan dihentikan Microsoft pada 14 Januari 2020.

  • Fitur "Auto Translate" pada halaman eKatalog sementara ini tidak tersedia. Mohon maaf atas ketidaknyamanannya.
    Auto translation feature on our e-Catalog page is temporarily not available. We apologize for any inconvenience.
  • Sehubungan dengan wabah virus Corona (2019-nCoV), kami mohon maaf dikarenakan beberapa supplier harus berhenti beroperasi dan tingginya permintaan akan beberapa produk, hal ini akan mempengaruhi lead time beberapa produk menjadi lebih lama dari waktu standar.
    Regarding the Coronavirus (2019-nCoV) Pandemic, Some of supplier have to stop working to follow additional precautionary measures the virus and due to effect of high demand some product, it may cause some of product take longer than standard lead time.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 14:00 25/10/2020 sampai dengan 2:00 pada tanggal 26/10/2020. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 14:00 25/10/2020 to 2:00 (WIB) 26/10/2020. We apologize for the inconvenience.

Thread Cutting Holders(Pitch:1.00~3.00)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 2 Day(s) or Less
  • 9 Day(s) or Less
  • 11 Day(s) or Less
  • 15 Day(s) or Less
  • 20 Day(s) or Less
  • 28 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Screw Type
Pitch(mm)
Minimum Machining Diameter(mm)
Selfishly
Shank size
With/Without Cutting Oil Hole
With/without flat cutting blade

    SEC-Threading Bit, Nejikiri-Kun, LTE Type

      SEC-Threading Bit, Nejikiri-Kun, STE Type

        Twisting-Kun, STI Type

        Brand

        SUMITOMO ELECTRIC HARDMETAL

        SUMITOMO ELECTRIC HARDMETAL

        SUMITOMO ELECTRIC HARDMETAL

        Product Series

        SEC-Threading Bit, Nejikiri-Kun, LTE Type

        SEC-Threading Bit, Nejikiri-Kun, STE Type

        Twisting-Kun, STI Type

        Days to Ship 9 Day(s) or more 9 Day(s) or more 9 Day(s) or more
        ApplicationOuter Diameter ScrewOuter Diameter ScrewInternal thread
        Screw Type60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M) / 55°C Whitworth (W)
        Pitch(mm)1.00~3.001.00~3.001.00~3.00
        Minimum Machining Diameter(mm)--20 ~ 25
        SelfishlyRight-handRight-handRight-hand
        Shank size20 Sq. / 25 Sq. / φ3212 Sq. / 16 Sq.φ16 / φ20
        With/Without Cutting Oil Hole---
        With/without flat cutting bladeBoth yes and noBoth yes and noBoth yes and no

        Loading...

        1. 1

        Related Categories to Thread Cutting Holders