(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Thread Cutting Holders(With/without flat cutting blade:Both yes and no)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 1 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  • 14 Day(s) or Less
  • 16 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Application
Screw Type
Pitch(mm)
Minimum Machining Diameter(mm)
Selfishly
Shank size
With/Without Cutting Oil Hole
With/without flat cutting blade

    SEC-Threading Bit for Outer Diameter, THE Type

      SEC-Threading Bit, Nejikiri-Kun, LTE Type

        Twisting-Kun, STI Type

          SEC-Threading Bit (mini bit), THE Type

            SEC-Threading Bit, THI Type

              SEC-Threading Bit, Nejikiri-Kun, STE Type

              Brand

              SUMITOMO ELECTRIC HARDMETAL

              SUMITOMO ELECTRIC HARDMETAL

              SUMITOMO ELECTRIC HARDMETAL

              SUMITOMO ELECTRIC HARDMETAL

              SUMITOMO ELECTRIC HARDMETAL

              SUMITOMO ELECTRIC HARDMETAL

              Product Series

              SEC-Threading Bit for Outer Diameter, THE Type

              SEC-Threading Bit, Nejikiri-Kun, LTE Type

              Twisting-Kun, STI Type

              SEC-Threading Bit (mini bit), THE Type

              SEC-Threading Bit, THI Type

              SEC-Threading Bit, Nejikiri-Kun, STE Type

              Days to Ship 10 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
              ApplicationOuter Diameter ScrewOuter Diameter ScrewInternal threadOuter Diameter ScrewInternal threadOuter Diameter Screw
              Screw Type60° Meter (M) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M) / 55°C Whitworth (W)60° Meter (M) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes60° Meter (M)60° Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55°C Whitworth (W) / Taper Rc (PT) (BSPT) for 55°C tubes
              Pitch(mm)0.80~3.001.00~3.001.00~3.000.80~3.000.40~1.001.00~3.00
              Minimum Machining Diameter(mm)--20 ~ 25-18 ~ 27-
              SelfishlyRight-handRight-handRight-handRight-handRight-handRight-hand
              Shank size20 Sq. / 25 Sq.20 Sq. / 25 Sq. / Ø32Ø16 / Ø2010 Sq. / 12 Sq.Ø16 / Ø20 / Ø2512 Sq. / 16 Sq.
              With/Without Cutting Oil Hole------
              With/without flat cutting bladeBoth yes and noBoth yes and noBoth yes and noBoth yes and noBoth yes and noBoth yes and no

              Loading...

              1. 1

              Related Categories to Thread Cutting Holders