3 Million Products, 1,500 Brands, Free Shipping,
24,000 Stock items for Same Day Shipping
24,000 Stock items for Same Day Shipping
3 Juta Produk, 1,500 Merek, Gratis Pengiriman,
24,000 Item Stok untuk Pengiriman di Hari yang Sama
24,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
Search by Brand Pencarian dengan Merek
Order/Quote
- Due to the typhoon(Hagibis) in Japan, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding
Cutting Bits
| Days to Ship |
|
|---|
-
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
HSS Bit JIS11 Model S502 Model Round Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 11 Day(s) or more -
Days to Ship: Quote -
HSS Bit JIS32 Model S513 Model Spring-Necked Cutting
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 10 Day(s) or more -
HSS Bit JIS31 Model S510 Model Parting
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 11 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: Quote -
HSS Bit JIS53 Model S512 Model Spring-Necked Threading
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
HSS Bit JIS40 Model S514 Model Round Hole Rough Cutting
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 2 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Days to Ship: 2 Day(s) or more -
Days to Ship: 2 Day(s) or more -
JIS Standard Flat Bit 20 Type (Old JIS Type)
HICUT
JIS Standard Flat Turning Tool Type 20 (Old JIS Type)
Days to Ship: 11 Day(s) or more -
Days to Ship: 9 Day(s) or more -
Assab 17, Complete Bit, Flat Bit (millimeter size)
ASSAB
High quality complete turning tool with outstanding hardness and cutting properties, originating in Sweden.
Days to Ship: 9 Day(s) or more -
Days to Ship: Quote -
Blade Bit with High Frequency (62 Type R/L Single Edge Bit/MV10 for Planing)
KOSHUHA
· Unique brazing and heat treatment are applied to high-grade high speed steel, boasting excellent performance, consistent quality, and a sharp cutting edge.
· Blade steel is ideal for the cutting conditions, achieving outstanding cutting performance.Days to Ship: 14 Day(s) or more -
Days to Ship: 9 Day(s) or more -
KOSHUHA
[Features]
· Blade steel is for turning (NK4 steel), ideal for the respective cutting conditions.
· JIS standard product.
· Blade steel is for turning (NK-4 steel), ideal for the respective cutting conditions.
· Items with non-standard shapes/dimensions can be manufactured as required.Days to Ship: 2 Day(s) or more -
HSS Bit JIS51 Model S509 Model Threading
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
HSS Bit JIS22 Model S511 Model Spring-Necked Finish
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 11 Day(s) or more -
HSS Bit JIS15L Model S504 Model Horizontal Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
HSS Bit JIS14L Model S508 Model Left Rough Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
HSS Bit JIS13L Model S506 Model Left Single Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 10 Day(s) or more -
HSS Bit JIS52 Model S516 Model Hole Threading
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
Days to Ship: Quote -
HSS Bit JIS42 Model S515 Model Hole Finish
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 11 Day(s) or more -
HSS Bit JIS15R Model S503 Model Horizontal Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 10 Day(s) or more -
HSS Bit JIS14R Model S507 Model Right Rough Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
HSS Bit JIS13R Model S505 Model Right Single Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more -
HSS Bit JIS10 Model S501 Model Straight Blade
SANWA SEISAKUSYO
[Features]
· The material used possesses both high temperature hardness and abrasion resistance superior compared to conventional high-speed steel.Days to Ship: 9 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| JIS Standard |
| Product Type |
| Width(mm) |
| Material |
| Overall Length(mm) |
| Height(mm) |
| Compatible Bit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANWA SEISAKUSYO | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANWA SEISAKUSYO | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | HICUT | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SUMITOMO ELECTRIC HARDMETAL | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | HICUT | SUMITOMO ELECTRIC HARDMETAL | ASSAB | SANWA SEISAKUSYO | KOSHUHA | SANWA SEISAKUSYO | KOSHUHA | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO | SANWA SEISAKUSYO |
| Product Series | Blade Bit with High Frequency (62 Type R/L Single Edge Bit/MV10 for Planing) | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | Quote | 10 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 12 Day(s) or more | Quote | 9 Day(s) or more | 2 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 12 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | Quote | 14 Day(s) or more | 9 Day(s) or more | 2 Day(s) or more | 9 Day(s) or more | 11 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | Quote | 11 Day(s) or more | 10 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more | 9 Day(s) or more |
| JIS Standard | 21 Type Projecting Bit (Right) | 32 Type (Left Handed) | 43 Type | Type 49 (Right-hand) | Type 11 Straight Turning Tool with Rounded Corner | 33 Type (Right-Handed) | 34 Type (Left Handed) | Type 47 (Right-hand) | - | 32 Type Hale Projecting Bit | 31 Type Projecting Bit | 31 Type (Right-Handed) | Type 45 (Right-hand) | - | Type 53 Hale threading tool | Type 40 Round tip hole tool | 38 Type Corner Bit (Left) | Type 41 twin tool (Right) ～ Type 42 twin tool (Left) | 37 Type (Right-Handed) | 38 Type (Left Handed) | 40 type (Left-hand) | Type 40 Round tip tool (Left) | Type 42 twin tool (Left) | 32 Type Asymmetric Cutting Edge Bit (Left) | 34 Type Single Cutting Edge Bit (Left) | 35 Type Straight Cutting Edge Bit | 20 Type Flat Bit | 35 Type | - | - | - | - | - | Type 51 outer threading tool | 22 Type Hale Finishing Tool | 15L Type Left Horizontal Finishing Tool Bit | 14L Type Left Rough Blade Bit | 13L Type Left Single-edged Bit | Type 52 threading tool | Type 41 hole tool | Type 42 hole finish tool | 15R Type Right Horizontal Finishing Tool Bit | 14R Type Right Rough Blade Bit | 13R Type Right Single-edged Bit | Shape 10 point nose straight tool |
| Product Type | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Cutting Bit with High-Speed Blade | Carbide bit | Carbide bit | Carbide bit | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Carbide bit | Carbide bit | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Carbide bit | Finished Cutting Bit | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Carbide bit | Carbide bit | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade | Cutting Bit with High-Speed Blade |
| Width(mm) | 13 ～ 19 | 13 ～ 25 | 10 ～ 19 | 13 ～ 25 | 10 ～ 38 | 10 ～ 25 | 10 ～ 25 | 13 ～ 25 | 10 ～ 38 | 10 ～ 32 | 10 ～ 38 | 13 ～ 25 | 16 ～ 25 | 13 ～ 19 | 10 ～ 38 | 10 ～ 32 | 13 ～ 25 | 10 ～ 25 | 13 ～ 25 | 13 ～ 25 | 10 ～ 25 | 10 ～ 25 | 13 ～ 25 | 13 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 3 ～ 12 | 10 ～ 25 | 13 ～ 32 | - | - | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 32 | 13 ～ 32 | 10 ～ 32 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 |
| Material | Carbide | Carbide | Carbide | Carbide | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | Carbide | HT103 ～ UT140 | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | HT103 ～ UT140 | Carbide | Cobalt HSS | High-speed steel | - | - | - | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Overall Length(mm) | 120 ～ 160 | 100 ～ 160 | 100 ～ 160 | 100 ～ 160 | 100 ～ 300 | 80 ～ 160 | 80 ～ 160 | 140 ～ 230 | 125 ～ 380 | 100 ～ 250 | 100 ～ 300 | 100 ～ 160 | 160 ～ 230 | 140 ～ 180 | 100 ～ 300 | 120 ～ 320 | 100 ～ 160 | 80 ～ 160 | 100 ～ 160 | 100 ～ 160 | 80 ～ 160 | 80 ～ 160 | 100 ～ 160 | 100 ～ 160 | 80 ～ 160 | 80 ～ 160 | 80 ～ 160 | 80 ～ 160 | 70 ～ 200 | 100 ～ 200 | 170 ～ 340 | - | - | 100 ～ 300 | 100 ～ 300 | 100 ～ 300 | 100 ～ 300 | 100 ～ 300 | 120 ～ 320 | 150 ～ 320 | 120 ～ 320 | 100 ～ 300 | 100 ～ 300 | 100 ～ 300 | 100 ～ 300 |
| Height(mm) | 13 ～ 19 | 13 ～ 25 | 16 ～ 25 | 13 ～ 25 | 10 ～ 38 | 10 ～ 25 | 10 ～ 25 | 13 ～ 25 | 10 ～ 38 | 10 ～ 32 | 10 ～ 38 | 13 ～ 25 | 16 ～ 25 | 13 ～ 19 | 10 ～ 38 | 10 ～ 32 | 13 ～ 25 | 10 ～ 25 | 13 ～ 25 | 13 ～ 25 | 10 ～ 25 | 10 ～ 25 | 13 ～ 25 | 13 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 8 ～ 30 | 10 ～ 25 | 13 ～ 32 | - | - | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 32 | 13 ～ 32 | 10 ～ 32 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 | 10 ～ 38 |
| Compatible Bit | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 02-4 ～ 02-0 | - | - | - | - | - | - | - | - | 02-4 ～ 02-1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
JIS Standard
- 5 type
- 5 type J
- Shape 10 point nose straight tool
- Type 11 Boring Tool (Right)
- Type 11 Similar product
- Type 11 Straight Turning Tool with Rounded Corner
- 13L Type Left Single-edged Bit
- 13R Type Right Single-edged Bit
- Type 13 Outer Thread Cutting Bit (Right)
- 14L Type Left Rough Blade Bit
- 14R Type Right Rough Blade Bit
- 15L Type Left Horizontal Finishing Tool Bit
- 15R Type Right Horizontal Finishing Tool Bit
- Type 15 Inner Thread Cutting Bit (Right)
- 20 Type Flat Bit
- 21 Type Projecting Bit (Right)
- 22 Type Hale Finishing Tool
- 31 Type (Right-Handed)
- 31 Type Asymmetric Cutting Edge Bit (Right)
- 31 Type Projecting Bit
- 32 Type (Left Handed)
- 32 Type Asymmetric Cutting Edge Bit (Left)
- 32 Type Hale Projecting Bit
- 33 Type (Right-Handed)
- 33 Type Single Cutting Edge Bit (Right)
- 34 Type (Left Handed)
- 34 Type Single Cutting Edge Bit (Left)
- 35 Type
- 35 Type Straight Cutting Edge Bit
- 36 Type
- 36 Type Round Tip Cutting Edge Bit
- 37 Type (Right-Handed)
- 37 Type Corner Bit (Right)
- 38 Type (Left Handed)
- 38 Type Corner Bit (Left)
- 39 Type (Right-Handed)
- 39 Type Round Tip Corner Bit (Right)
- 40 type (Left-hand)
- Type 40 Round tip hole tool
- Type 40 Round tip tool (Left)
- Type 41 (Right-hand)
- Type 41 hole tool
- Type 41 twin tool (Right)
- 42 type (Left-hand)
- Type 42 hole finish tool
- Type 42 twin tool (Left)
- 43 Type
- Type 43 punching tool (Right)
- Type 45 (Right-hand)
- Type 47 (Right-hand)
- Type 49 (Right-hand)
- Type 51 (Right-hand)
- Type 51 outer threading tool
- Type 52 threading tool
- Type 53 Hale threading tool
- 60 Type Real Byte
- 64 Type Square Nose Straight Tool
- 95 Type
- Box Tool Bits for Turret
- Flat Bit for Bench Lathe
- Precise Automatic Lathe Tool - Conventional Type
- Precise Automatic Lathe Tool - External Cutting Type
- Precise Automatic Lathe Tool - Flat Type
- Precise Automatic Lathe Tool - L Type
- Precise Automatic Lathe Tool - Plunging Type
- Square bit (inch)
- Square bit (millimeter)
- Sticking Tool
-
Product Type
-
Width(mm)
-
Material
-
Overall Length(mm)
-
Height(mm)
-
Compatible Bit
- Ru -4
- To -4
- Ru -3
- To -3
- Ru -2
- To -2
- Ru -1
- To -1
- 01-4
- 01-3
- 01-2
- 01-1
- 01-0
- Square Completed Cutting Bit 1x1x8
- Square Material Cutter Bit (Plain Cutter Bit) 1x1x300
- Square Completed Cutting Bit 1/2x1/2x4
- Square Completed Cutting Bit 1/2x1/2x6
- Square Completed Cutting Bit 1/2x1/2x8
- Square Material Cutter Bit (Plain Cutter Bit) 1/2x1/2x300
- Parting tool with trapezoidal section NO. 1 (3.2 x 1/2 x 90)
- Square Completed Cutting Bit 1/4x1/4x4
- Square Completed Cutting Bit 1/4x1/4x6
- Square Completed Cutting Bit 1/4x1/4x21/2
- Square Material Cutter Bit (Plain Cutter Bit) 1/4x1/4x300
- Square Completed Cutting Bit 1/8x1/8x21/2
- Round Completed Cutting Bit 1x50
- Round Completed Cutting Bit 1x100
- Round Completed Cutting Bit 1.5x65
- Round Completed Cutting Bit 1.5x100
- 02-4
- 02-3
- 02-2
- 02-1
- 02-0
- Parting tool with trapezoidal section NO. 2 (3.2 x 16 x 115)
- Parting tool with trapezoidal section NO. 2 (4 x 16 x 115)
- Parting tool with trapezoidal section NO. 2 (4 x 16 x 200)
- Flat finishing bit 2x6x65
- Flat finishing bit 2x6x200
- Flat finishing bit 2x8x200
- Flat finishing bit 2x10x200
- Flat finishing bit 2x12x115
- Flat finishing bit 2x12x200
- Flat finishing bit 2x13x200
- Flat finishing bit 2x16x200
- Flat finishing bit 2x19x150
- Flat finishing bit 2x19x200
- Round Completed Cutting Bit 2x65
- Round Completed Cutting Bit 2.5x65
- Round Completed Cutting Bit 2.5x100
- 03-4
- 03-3
- 03-2
- 03-1
- 03-0
- Square Completed Cutting Bit 3x3x65
- Square Completed Cutting Bit 3/4x3/4x6
- Square Completed Cutting Bit 3/4x3/4x8
- Square Material Cutter Bit (Plain Cutter Bit) 3/4x3/4x300
- Parting tool with trapezoidal section NO. 3 (4.8 x 19 x 140)
- Flat finishing bit 3x5x65
- Flat finishing bit 3x6x65
- Flat finishing bit 3x6x100
- Flat finishing bit 3x6x150
- Flat finishing bit 3x6x200
- Square Completed Cutting Bit 3/8x3/8x3
- Square Completed Cutting Bit 3/8x3/8x4
- Square Completed Cutting Bit 3/8x3/8x6
- Square Material Cutter Bit (Plain Cutter Bit) 3/8x3/8x300
- Flat finishing bit 3x8x75
- Flat finishing bit 3x8x100
- Flat finishing bit 3x8x150
- Flat finishing bit 3x8x200
- Flat finishing bit 3x10x100
- Flat finishing bit 3x10x150
- Flat finishing bit 3x10x200
- Flat finishing bit 3x13x150
- Flat finishing bit 3x13x200
- Flat plain bit (plain bit) 3x13x300
- Square Completed Cutting Bit 3/16x3/16x2-1/2
- Square Completed Cutting Bit 3/16x3/16x4
- Square Completed Cutting Bit 3/16x3/16x6
- Flat finishing bit 3x16x150
- Flat finishing bit 3x16x200
- Flat plain bit (plain bit) 3x16x300
- Flat finishing bit 3x18x200
- Flat finishing bit 3x19x150
- Flat finishing bit 3x19x200
- Flat plain bit (plain bit) 3x19x300
- Flat finishing bit 3x25x200
- Flat finishing bit 3x32x200
- Flat plain bit (plain bit) 3x32x300
- Round Completed Cutting Bit 3x65
- Round Completed Cutting Bit 3x100
- Round Completed Cutting Bit 3.5x65
- Round Completed Cutting Bit 3.5x100
- 04-4
- 04-3
- 04-2
- 04-1
- 04-0
- Square Completed Cutting Bit 4x4x65
- Square Completed Cutting Bit 4x4x100
- Parting tool with trapezoidal section NO. 4 (6 x 25 x 165)
- Flat finishing bit 4x8x100
- Flat finishing bit 4x8x150
- Flat finishing bit 4x10x150
- Flat finishing bit 4x10x200
- Flat finishing bit 4x13x150
- Flat finishing bit 4x13x200
- Flat finishing bit 4x16x150
- Flat finishing bit 4x16x200
- Flat finishing bit 4x19x150
- Flat finishing bit 4x19x200
- Flat finishing bit 4x25x200
- Flat finishing bit 4x32x200
- Round Completed Cutting Bit 4x65
- Round Completed Cutting Bit 4x100
- Round Completed Cutting Bit 4.5x65
- Round Completed Cutting Bit 4.5x100
- 05-4
- 05-3
- 05-2
- 05-1
- Square Completed Cutting Bit 5x5x65
- Square Completed Cutting Bit 5x5x100
- Square Completed Cutting Bit 5x5x150
- Square Completed Cutting Bit 5/8x5/8x5
- Square Completed Cutting Bit 5/8x5/8x6
- Square Completed Cutting Bit 5/8x5/8x8
- Square Material Cutter Bit (Plain Cutter Bit) 5/8x5/8x300
- Flat finishing bit 5x8x150
- Flat finishing bit 5x10x150
- Flat finishing bit 5x10x200
- Flat finishing bit 5x13x150
- Flat finishing bit 5x13x200
- Flat plain bit (plain bit) 5x13x300
- Square Completed Cutting Bit 5/16x5/16x2-1/2
- Square Completed Cutting Bit 5/16x5/16x4
- Square Completed Cutting Bit 5/16x5/16x6
- Square Material Cutter Bit (Plain Cutter Bit) 5/16x5/16x300
- Flat finishing bit 5x16x150
- Flat finishing bit 5x16x200
- Flat plain bit (plain bit) 5x16x300
- Flat finishing bit 5x19x150
- Flat finishing bit 5x19x200
- Flat finishing bit 5x25x200
- Flat plain bit (plain bit) 5x25x300
- Flat finishing bit 5x32x200
- Flat plain bit (plain bit) 5x32x300
- Round Completed Cutting Bit 5x65
- Round Completed Cutting Bit 5x100
- Round Completed Cutting Bit 5.5x65
- Round Completed Cutting Bit 5.5x100
- 06-4
- 06-3
- 06-2
- 06-1
- 06-0
- Square Completed Cutting Bit 6x6x65
- Square Completed Cutting Bit 6x6x100
- Square Completed Cutting Bit 6x6x150
- Flat finishing bit 6x8x150
- Flat finishing bit 6x8x200
- Flat finishing bit 6x10x150
- Flat finishing bit 6x10x200
- Flat finishing bit 6x12x150
- Flat finishing bit 6x12x200
- Flat finishing bit 6x13x150
- Flat finishing bit 6x13x200
- Flat plain bit (plain bit) 6x13x300
- Flat finishing bit 6x16x150
- Flat finishing bit 6x16x200
- Flat plain bit (plain bit) 6x16x300
- Flat finishing bit 6x19x150
- Flat finishing bit 6x19x200
- Flat plain bit (plain bit) 6x19x300
- Flat finishing bit 6x25x200
- Flat plain bit (plain bit) 6x25x300
- Flat finishing bit 6x32x200
- Flat plain bit (plain bit) 6x32x300
- Round Completed Cutting Bit 6x65
- Round Completed Cutting Bit 6x100
- Automatic Lathe Bit Finishing 6x150-H1
- Automatic Lathe Bit Left Plunging 6x150-H1
- Automatic Lathe Bit Left Single Flute 6x150-H1
- Automatic Lathe Bit Right Plunging 6x150-H1
- Automatic Lathe Bit Right Single Flute 6x150-H1
- Automatic Lathe Bit Finishing 6x150-H2
- Automatic Lathe Bit Finishing 6x150-MF2
- Automatic Lathe Bit Left Plunging 6x150-H2
- Automatic Lathe Bit Left Plunging 6x150-MF2
- Automatic Lathe Bit Left Single Flute 6x150-H2
- Automatic Lathe Bit Left Single Flute 6x150-MF2
- Automatic Lathe Bit Right Plunging 6x150-H2
- Automatic Lathe Bit Right Plunging 6x150-MF2
- Automatic Lathe Bit Right Single Flute 6x150-H2
- Automatic Lathe Bit Right Single Flute 6x150-MF2
- Automatic Lathe Bit Finishing 6x150-STi20
- Automatic Lathe Bit Finishing 6x150-UTi20
- Automatic Lathe Bit Left Plunging 6x150-STi20
- Automatic Lathe Bit Left Plunging 6x150-UTi20
- Automatic Lathe Bit Left Single Flute 6x150-STi20
- Automatic Lathe Bit Left Single Flute 6x150-UTi20
- Automatic Lathe Bit Right Plunging 6x150-STi20
- Automatic Lathe Bit Right Plunging 6x150-UTi20
- Automatic Lathe Bit Right Single Flute 6x150-STi20
- Automatic Lathe Bit Right Single Flute 6x150-UTi20
- Round Completed Cutting Bit 6x200
- Round Material Cutter Bit (Plain Cutter Bit) 6x300
- Round Completed Cutting Bit 6.5x65
- Round Completed Cutting Bit 6.5x100
- 07-4
- 07-3
- 07-2
- 07-1
- 07-0
- Square Completed Cutting Bit 7x7x65
- Square Completed Cutting Bit 7x7x100
- Square Completed Cutting Bit 7x7x150
- Square Completed Cutting Bit 7/8x7/8x8
- Square Completed Cutting Bit 7/16x7/16x4
- Round Completed Cutting Bit 7x100
- Automatic Lathe Bit Finishing 7x150-H1
- Automatic Lathe Bit Left Plunging 7x150-H1
- Automatic Lathe Bit Left Single Flute 7x150-H1
- Automatic Lathe Bit Right Plunging 7x150-H1
- Automatic Lathe Bit Right Single Flute 7x150-H1
- Automatic Lathe Bit Finishing 7x150-H2
- Automatic Lathe Bit Finishing 7x150-MF2
- Automatic Lathe Bit Left Plunging 7x150-H2
- Automatic Lathe Bit Left Plunging 7x150-MF2
- Automatic Lathe Bit Left Single Flute 7x150-H2
- Automatic Lathe Bit Left Single Flute 7x150-MF2
- Automatic Lathe Bit Right Plunging 7x150-H2
- Automatic Lathe Bit Right Plunging 7x150-MF2
- Automatic Lathe Bit Right Single Flute 7x150-H2
- Automatic Lathe Bit Right Single Flute 7x150-MF2
- Automatic Lathe Bit Finishing 7x150-STi20
- Automatic Lathe Bit Finishing 7x150-UTi20
- Automatic Lathe Bit Left Plunging 7x150-STi20
- Automatic Lathe Bit Left Plunging 7x150-UTi20
- Automatic Lathe Bit Left Single Flute 7x150-STi20
- Automatic Lathe Bit Left Single Flute 7x150-UTi20
- Automatic Lathe Bit Right Plunging 7x150-STi20
- Automatic Lathe Bit Right Plunging 7x150-UTi20
- Automatic Lathe Bit Right Single Flute 7x150-STi20
- Automatic Lathe Bit Right Single Flute 7x150-UTi20
- Round Completed Cutting Bit 7x200
- Round Completed Cutting Bit 7.5x100
- 08-4
- 08-3
- 08-1
- Square Completed Cutting Bit 8x8x65
- Square Completed Cutting Bit 8x8x75
- Square Completed Cutting Bit 8x8x100
- Square Completed Cutting Bit 8x8x150
- Square Material Cutter Bit (Plain Cutter Bit) 8x8x300
- Flat finishing bit 8x10x150
- Flat finishing bit 8x10x200
- Flat finishing bit 8x12x150
- Flat finishing bit 8x12x200
- Flat finishing bit 8x13x150
- Flat finishing bit 8x13x200
- Flat plain bit (plain bit) 8x13x300
- Automatic Lathe Bit Right Plunging 8x15-H1
- Flat finishing bit 8x16x150
- Flat finishing bit 8x16x200
- Flat finishing bit 8x19x150
- Flat finishing bit 8x19x200
- Flat plain bit (plain bit) 8x19x300
- Flat finishing bit 8x25x200
- Flat plain bit (plain bit) 8x25x300
- Flat finishing bit 8x32x200
- Flat plain bit (plain bit) 8x32x300
- Square Completed Cutting Bit 8x65
- Round Completed Cutting Bit 8x80
- Round Completed Cutting Bit 8x100
- Automatic Lathe Bit Finishing 8x150-H1
- Automatic Lathe Bit Left Plunging 8x150-H1
- Automatic Lathe Bit Left Single Flute 8x150-H1
- Automatic Lathe Bit Right Single Flute 8x150-H1
- Automatic Lathe Bit Finishing 8x150-H2
- Automatic Lathe Bit Finishing 8x150-MF2
- Automatic Lathe Bit Left Plunging 8x150-H2
- Automatic Lathe Bit Left Plunging 8x150-MF2
- Automatic Lathe Bit Left Single Flute 8x150-H2
- Automatic Lathe Bit Left Single Flute 8x150-MF2
- Automatic Lathe Bit Right Plunging 8x150-H2
- Automatic Lathe Bit Right Plunging 8x150-MF2
- Automatic Lathe Bit Right Single Flute 8x150-H2
- Automatic Lathe Bit Right Single Flute 8x150-MF2
- Automatic Lathe Bit Finishing 8x150-STi20
- Automatic Lathe Bit Finishing 8x150-UTi20
- Automatic Lathe Bit Left Plunging 8x150-STi20
- Automatic Lathe Bit Left Plunging 8x150-UTi20
- Automatic Lathe Bit Left Single Flute 8x150-STi20
- Automatic Lathe Bit Left Single Flute 8x150-UTi20
- Automatic Lathe Bit Right Plunging 8x150-STi20
- Automatic Lathe Bit Right Plunging 8x150-UTi20
- Automatic Lathe Bit Right Single Flute 8x150-STi20
- Automatic Lathe Bit Right Single Flute 8x150-UTi20
- Round Completed Cutting Bit 8x200
- Round Material Cutter Bit (Plain Cutter Bit) 8x300
- Round Completed Cutting Bit 8.5x100
- Round Completed Cutting Bit 9x150
- Round Completed Cutting Bit 9.5x100
- Square Completed Cutting Bit 10x10x75
- Square Completed Cutting Bit 10x10x100
- Square Completed Cutting Bit 10x10x150
- Square Completed Cutting Bit 10x10x200
- Square Material Cutter Bit (Plain Cutter Bit) 10x10x300
- Flat finishing bit 10x13x150
- Flat finishing bit 10x13x200
- Flat plain bit (plain bit) 10x13x300
- Automatic Lathe Bit Right Plunging 10x15-MF2
- Flat finishing bit 10x16x150
- Flat finishing bit 10x16x200
- Flat plain bit (plain bit) 10x16x300
- Flat finishing bit 10x19x150
- Flat finishing bit 10x19x200
- Flat plain bit (plain bit) 10x19x300
- Flat finishing bit 10x25x200
- Flat plain bit (plain bit) 10x25x300
- Flat finishing bit 10x32x200
- Flat plain bit (plain bit) 10x32x300
- Round Completed Cutting Bit 10x80
- Round Completed Cutting Bit 10x100
- Round Completed Cutting Bit 10x150
- Automatic Lathe Bit Finishing 10x150-H1
- Automatic Lathe Bit Left Plunging 10x150-H1
- Automatic Lathe Bit Left Single Flute 10x150-H1
- Automatic Lathe Bit Right Plunging 10x150-H1
- Automatic Lathe Bit Right Single Flute 10x150-H1
- Automatic Lathe Bit Finishing 10x150-H2
- Automatic Lathe Bit Finishing 10x150-MF2
- Automatic Lathe Bit Left Plunging 10x150-H2
- Automatic Lathe Bit Left Plunging 10x150-MF2
- Automatic Lathe Bit Left Single Flute 10x150-H2
- Automatic Lathe Bit Left Single Flute 10x150-MF2
- Automatic Lathe Bit Right Plunging 10x150-H2
- Automatic Lathe Bit Right Single Flute 10x150-H2
- Automatic Lathe Bit Right Single Flute 10x150-MF2
- Automatic Lathe Bit Finishing 10x150-STi20
- Automatic Lathe Bit Finishing 10x150-UTi20
- Automatic Lathe Bit Left Plunging 10x150-STi20
- Automatic Lathe Bit Left Plunging 10x150-UTi20
- Automatic Lathe Bit Left Single Flute 10x150- UTi20
- Automatic Lathe Bit Left Single Flute 10x150-STi20
- Automatic Lathe Bit Right Plunging 10x150-STi20
- Automatic Lathe Bit Right Plunging 10x150-UTi20
- Automatic Lathe Bit Right Single Flute 10x150-STi20
- Automatic Lathe Bit Right Single Flute 10x150-UTi20
- Round Completed Cutting Bit 10x200
- Round Material Cutter Bit (Plain Cutter Bit) 10x300
- Round Completed Cutting Bit 10.5x100
- Square Completed Cutting Bit 12x12x100
- Square Completed Cutting Bit 12x12x150
- Square Completed Cutting Bit 12x12x200
- Round Completed Cutting Bit 12x100
- Round Completed Cutting Bit 12x150
- Automatic Lathe Bit Finishing 12x150-H1
- Automatic Lathe Bit Left Plunging 12x150-H1
- Automatic Lathe Bit Left Single Flute 12x150-H1
- Automatic Lathe Bit Right Plunging 12x150-H1
- Automatic Lathe Bit Right Single Flute 12x150-H1
- Automatic Lathe Bit Finishing 12x150-H2
- Automatic Lathe Bit Finishing 12x150-MF2
- Automatic Lathe Bit Left Plunging 12x150-H2
- Automatic Lathe Bit Left Plunging 12x150-MF2
- Automatic Lathe Bit Left Single Flute 12x150-H2
- Automatic Lathe Bit Left Single Flute 12x150-MF2
- Automatic Lathe Bit Right Plunging 12x150-H2
- Automatic Lathe Bit Right Plunging 12x150-MF2
- Automatic Lathe Bit Right Single Flute 12x150-H2
- Automatic Lathe Bit Right Single Flute 12x150-MF2
- Automatic Lathe Bit Finishing 12x150-STi20
- Automatic Lathe Bit Finishing 12x150-UTi20
- Automatic Lathe Bit Left Plunging 12x150-STi20
- Automatic Lathe Bit Left Plunging 12x150-UTi20
- Automatic Lathe Bit Left Single Flute 12x150-STi20
- Automatic Lathe Bit Left Single Flute 12x150-UTi20
- Automatic Lathe Bit Right Plunging 12x150-STi20
- Automatic Lathe Bit Right Plunging 12x150-UTi20
- Automatic Lathe Bit Right Single Flute 12x150-STi20
- Automatic Lathe Bit Right Single Flute 12x150-UTi20
- Round Completed Cutting Bit 12x200
- Square Completed Cutting Bit 13x13x150
- Square Material Cutter Bit (Plain Cutter Bit) 13x13x300
- Flat finishing bit 13x16x150
- Flat finishing bit 13x16x200
- Flat plain bit (plain bit) 13x16x300
- Flat finishing bit 13x19x150
- Flat finishing bit 13x19x200
- Flat plain bit (plain bit) 13x19x300
- Flat finishing bit 13x25x200
- Flat plain bit (plain bit) 13x25x300
- Flat finishing bit 13x32x200
- Flat plain bit (plain bit) 13x32x300
- Round Completed Cutting Bit 13x200
- Round Material Cutter Bit (Plain Cutter Bit) 13x300
- Square Completed Cutting Bit 14x14x150
- Round Completed Cutting Bit 14x100
- Round Completed Cutting Bit 14x200
- Square Completed Cutting Bit 15x15x150
- Round Completed Cutting Bit 15x200
- Square Completed Cutting Bit 16x16x125
- Square Completed Cutting Bit 16x16x150
- Square Material Cutter Bit (Plain Cutter Bit) 16x16x300
- Flat finishing bit 16x19x200
- Flat finishing bit 16x25x200
- Flat plain bit (plain bit) 16x25x300
- Flat finishing bit 16x32x200
- Round Completed Cutting Bit 16x150
- Round Completed Cutting Bit 16x200
- Automatic Lathe Bit Finishing 16x200-H1
- Automatic Lathe Bit Left Plunging 16x200-H1
- Automatic Lathe Bit Left Single Flute 16x200-H1
- Automatic Lathe Bit Right Plunging 16x200-H1
- Automatic Lathe Bit Right Single Flute 16x200-H1
- Automatic Lathe Bit Finishing 16x200-H2
- Automatic Lathe Bit Finishing 16x200-MF2
- Automatic Lathe Bit Left Plunging 16x200-H2
- Automatic Lathe Bit Left Plunging 16x200-MF2
- Automatic Lathe Bit Left Single Flute 16x200-H2
- Automatic Lathe Bit Left Single Flute 16x200-MF2
- Automatic Lathe Bit Right Plunging 16x200-H2
- Automatic Lathe Bit Right Plunging 16x200-MF2
- Automatic Lathe Bit Right Single Flute 16x200-H2
- Automatic Lathe Bit Right Single Flute 16x200-MF2
- Automatic Lathe Bit Finishing 16x200-STi20
- Automatic Lathe Bit Finishing 16x200-UTi20
- Automatic Lathe Bit Left Plunging 16x200-STi20
- Automatic Lathe Bit Left Plunging 16x200-UTi20
- Automatic Lathe Bit Left Single Flute 16x200-STi20
- Automatic Lathe Bit Left Single Flute 16x200-UTi20
- Automatic Lathe Bit Right Plunging 16x200-STi20
- Automatic Lathe Bit Right Plunging 16x200-UTi20
- Automatic Lathe Bit Right Single Flute 16x200-STi20
- Automatic Lathe Bit Right Single Flute 16x200-UTi20
- Round Material Cutter Bit (Plain Cutter Bit) 16x300
- Square Completed Cutting Bit 18x18x150
- Round Completed Cutting Bit 18x200
- Square Completed Cutting Bit 19x19x150
- Square Completed Cutting Bit 19x19x200
- Square Material Cutter Bit (Plain Cutter Bit) 19x19x300
- Flat finishing bit 19x25x200
- Flat finishing bit 19x32x200
- Round Material Cutter Bit (Plain Cutter Bit) 19x300
- Square Completed Cutting Bit 20x20x150
- Round Completed Cutting Bit 20x150
- Square Completed Cutting Bit 22x22x200
- Round Completed Cutting Bit 22x150
- Square Completed Cutting Bit 25x25x200
- Square Material Cutter Bit (Plain Cutter Bit) 25x25x300
- Flat finishing bit 25x32x200
- Round Completed Cutting Bit 25x150
- Round Completed Cutting Bit 25x200
- Round Material Cutter Bit (Plain Cutter Bit) 25x300
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
- Credit CardKartu Kredit
- Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
MISUMISales area
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy