(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Carbide Drills（Shank Type：End Mill Shank）

An online store for carbide drills. In MISUMI's e-catalog, by entering the specifications/dimensions of tool size such as drill diameter, groove length and total length, processing work materials and coating, oil hole presence, etc., you can find the desired tool. In Misumi, shapes such as step drill, center drill, burnishing drill, and varied lineups are available according to the application for high-speed high-feed use.
[What is a carbide drill?]
It is a type of milling tool that pierces cylindrical holes in objects by rotating motion. With a spiral groove on the round rod for discharging chips, it is a tool with a cutting edge at the conically sharpened tip. While the end mill uses the peripheral blade to cut the walls, the drill makes holes by machining perpendicular to the workpiece in the Z axis direction. Some have a hole (oil hole) inside that penetrates to the tip so that cutting oil can reach the tip.

Search by specifying the lower class category

162 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

1
2
3
4
Next >>

CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill

SANDVIK

[Features]
General Purpose High Performance Carbide Solid Drill
· Coolant Through

Days to Ship: 16 Day(s) or more
TA-EZ Drill TEZD-MS Type

DIJET

It is a tool with excellent abrasion resistance.

Days to Ship: 16 Day(s) or more
Aqua Drill 3-Flute AQD3F

NACHI(FUJIKOSHI)

3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

Days to Ship: 11 Day(s) or more
Aqua Drill EX Flat AQDEXZ

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 10 Day(s) or more
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit

UNION TOOL

[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: Carbide

Days to Ship: 12 Day(s) or more
Carbide Drill 4D Type_AD-4D

OSG

[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 12 Day(s) or more
Aqua Drill EX Stub AQDEXS

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Carbide Burnishing Drill, Stepped Model

MISUMI

[Features]
·No complicated estimates required. It is possible to order part number of stepped drill bit without drawings

Days to Ship: 10 Day(s) or more
Aqua Drill EX Regular AQDEXR

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Toglon Hard Drill Bit Regular ALT Coating

IWATA TOOL

· 3-flute blade design gives a finish with outstanding hole diameter accuracy and hole surface roughness.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Flat Long Shank AQDEXZLS

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 11 Day(s) or more
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

MISUMI

[Features]
·Ideal for high-precision small-diameter hole drilling
·The shank diameter is unified to 3 mm, enabling high-precision chucking
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining

Volume Discount
Days to Ship: 10 Day(s) or more
Aqua Drill EX Oil Hole 8D AQDEXOH8D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 9 Day(s) or more
Solid Carbide Drills (Diamond Coated)_D-GDN

OSG

Demonstrates power in machining not only aluminum alloys, but also high silicone aluminum alloys where carbide drills have extremely short lives

Days to Ship: 16 Day(s) or more
PHP Carbide Drill, Phoenix Drill

OSG

An indexable drill that achieves high machining capacity and has excellent chip discharge properties. 4-corner type inserts with excellent cost performance.

Days to Ship: 16 Day(s) or more
WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL

OSG

Ideal for processing from 55 to 70 HRC. A drill for ultra-high-hardness steel in which stable processing by highly reliable cutting edge shape and coating for high-hardness steel are combined.

Days to Ship: 16 Day(s) or more
Super Multi-Drill External Refueling, GS-Model 4D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Micro Drill, for Stainless Steel

ATOM

Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.

Days to Ship: 12 Day(s) or more
Micro Drill Standard Tip Length

ATOM

A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.

Days to Ship: 16 Day(s) or more
Beam Drill (Micro type) VN-DRD Type

DIJET

It is a tool with excellent abrasion resistance.

Days to Ship: 16 Day(s) or more
Carbide Flat Drill 2D Type_ADF-2D

OSG

[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.

Days to Ship: 2 Day(s) or more
Flat Multi-Drill MDF Type External Lubrication 2D Type

SUMITOMO ELECTRIC HARDMETAL

[Features]
· As well as higher efficiency counterbore machining, this carbide solid drill can be used for various applications such as drilling inclined surfaces or curved surfaces.

Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

MISUMI

3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Double Margin Drill, Regular

MISUMI

[Features]
·By providing 4 margins on the outer periphery of the drill, the guide performance during chamfer and penetration is improved, enabling highly straight and stable drilling
·Supports a wide range of work materials from general steel to stainless steel
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular

MISUMI

[Features]
·Weak helix angle and high core diameter improve tool rigidity
·Achieves outstanding strength by adopting straight cutting edge
·Ideal for machining high hardness steel of HRC40 to 60
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

MISUMI

A small radius type of the high-hardness steel series

Volume Discount
Days to Ship: 16 Day(s) or more
DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model

MISUMI

[Features]
·Designed with helix angle of 38° near the tip and 20° near the shank
·The 20° section has large core diameter for improved tool durability
·120° tip angle and combined helix angle improve durability in aluminum processing

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Micro Drill AQMD

NACHI(FUJIKOSHI)

A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

Days to Ship: 9 Day(s) or more
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL

OSG

Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.

Days to Ship: 16 Day(s) or more
UTDSX UT, Micro Coating Unimax Short Flute Drill Bit

UNION TOOL

[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing

STOCK
Days to Ship: 1 Day(s) or more
NSMD-S Micro Drill, Short

NS TOOL

A short type with groove length 6 times the blade diameter, capable of stable machining

Days to Ship: 16 Day(s) or more
WXS Coated Carbide Drill for Hardened Steel with Internal Coolant Supply (5D Type)_WHO55-5D

OSG

Ideal for steel materials and Ni-based alloys up to 55 HRC. Longer machining life is achieved thanks to the oil hole

Days to Ship: 16 Day(s) or more
Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 5D Type

SUMITOMO ELECTRIC HARDMETAL

Adopts an Aurora coating (DLC coating) and low resistance WL (wide L) thinning for greatly reduced cutting resistance. Aurora coating and blade shape achieve a stable long life.

Days to Ship: 16 Day(s) or more
Micro Drill "NEO PRO" Long Blades

ATOM

A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).

Days to Ship: 16 Day(s) or more
Micro Drill "NEO PRO" Standard Blade Length

ATOM

A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).

Days to Ship: 16 Day(s) or more
Micro Drill Short Tip

ATOM

A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.

Days to Ship: 12 Day(s) or more
End Mill Shank Type 5xD RT100U 5515

GUHRING

[Features]
· Supports a wide range of machining and enables high-efficiency, high-speed machining.

Days to Ship: 10 Day(s) or more
End Mill Shank Drill Straight Groove Type 10 × D with Oil Hole, RT150 GG, Double Margin 5513

GUHRING

Straight groove and double margin provide excellent rectilinearity ideal for machining castings, angled drilling, etc. up to 10 x D.

Days to Ship: 10 Day(s) or more
PCD Drill DRD-2

KYOWA SEIKO

The solid PCD cutting edge is spiral shaped. Machining is possible for non-ferrous metals through hard-to-cut materials such as ceramics.

Days to Ship: 16 Day(s) or more
Carbide Solid Pivot Type Drill KDR-2

KYOWA SEIKO

[Specifications]
· Shape: Straight Shank / End Mill Shank Drill (carbide)
· Material: Micro Grain Alloy
· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / aluminum [○]

Days to Ship: 12 Day(s) or more
Carbide Solid Pivot Type Flat Drill KDR-F

KYOWA SEIKO

[Specifications]
· Shape: Straight Shank / End Mill Shank Drill (carbide)
· Material: Micro Grain Alloy
· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎] / aluminum [○] / copper [○] / resin [○]

Days to Ship: 12 Day(s) or more
AQDEXZOH5D Aqua Drill EX Flat Oil Hole 5D

NACHI(FUJIKOSHI)

A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 5D.
· A centering hole or guide hole is required.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 9 Day(s) or more
Carbide Drill 2D Type_AD-2D

OSG

[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 2 Day(s) or more
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D

OSG

[Features]
· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
Carbide Drill with Internal Coolant Supply (15D Type)_ADO-15D

OSG

[Features]
· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes

Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	1 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type


Brand	SANDVIK	DIJET	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	UNION TOOL	OSG	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	IWATA TOOL	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	ATOM	ATOM	DIJET	OSG	SUMITOMO ELECTRIC HARDMETAL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	UNION TOOL	NS TOOL	OSG	SUMITOMO ELECTRIC HARDMETAL	ATOM	ATOM	ATOM	GUHRING	GUHRING	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	NACHI(FUJIKOSHI)	OSG	OSG	OSG
Product Series	CORO-DRILL 460-XM Tap Pilot Hole Chamfering Drill	TA-EZ Drill TEZD-MS Type	Aqua Drill 3-Flute AQD3F	Aqua Drill EX Flat AQDEXZ	C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit	Carbide Drill 4D Type_AD-4D	Aqua Drill EX Stub AQDEXS	Carbide Burnishing Drill, Stepped Model	Aqua Drill EX Regular AQDEXR	Toglon Hard Drill Bit Regular ALT Coating	Aqua Drill EX Flat Long Shank AQDEXZLS	TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model	Aqua Drill EX Oil Hole 8D AQDEXOH8D	Solid Carbide Drills (Diamond Coated)_D-GDN	PHP Carbide Drill, Phoenix Drill	WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL	Super Multi-Drill External Refueling, GS-Model 4D-Type	Micro Drill, for Stainless Steel	Micro Drill Standard Tip Length	Beam Drill (Micro type) VN-DRD Type	Carbide Flat Drill 2D Type_ADF-2D	Flat Multi-Drill MDF Type External Lubrication 2D Type	TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular	TiAlN Coated Carbide Double Margin Drill, Regular	TS Coated Carbide Drill for High-Hardness Steel Machining, Stub Model, Regular	TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular	DLC Coated Carbide Drill for Aluminum Machining, Composite Spiral / Regular Model	Aqua Micro Drill AQMD	Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL	UTDSX UT, Micro Coating Unimax Short Flute Drill Bit	NSMD-S Micro Drill, Short	WXS Coated Carbide Drill for Hardened Steel with Internal Coolant Supply (5D Type)_WHO55-5D	Super-Multi Drill Bit, Internal Lubrication Type, NHGS Series 5D Type	Micro Drill "NEO PRO" Long Blades	Micro Drill "NEO PRO" Standard Blade Length	Micro Drill Short Tip	End Mill Shank Type 5xD RT100U 5515	End Mill Shank Drill Straight Groove Type 10 × D with Oil Hole, RT150 GG, Double Margin 5513	PCD Drill DRD-2	Carbide Solid Pivot Type Drill KDR-2	Carbide Solid Pivot Type Flat Drill KDR-F	AQDEXZOH5D Aqua Drill EX Flat Oil Hole 5D	Carbide Drill 2D Type_AD-2D	Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D	Carbide Drill with Internal Coolant Supply (15D Type)_ADO-15D
Days to Ship	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	10 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	10 Day(s) or more	9 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	9 Day(s) or more	16 Day(s) or more	1 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	9 Day(s) or more	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications																														STOCK
Hole diameter (drill diameter) D(mm)	3.35 ～ 6.9	14 ～ 30	3.1 ～ 15	0.5 ～ 19.5	0.11 ～ 3	2 ～ 20	2 ～ 15.9	-	2 ～ 15.9	1 ～ 5.5	3 ～ 20	0.38 ～ 2.7	3.1 ～ 15.9	2 ～ 11.5	14 ～ 39	2 ～ 11.9	1 ～ 8.6	0.1 ～ 3	0.02 ～ 3	0.4 ～ 2.9	2 ～ 19.5	-	2 ～ 13	1 ～ 12	3 ～ 13	0.8 ～ 3	4.2 ～ 6.5	0.2 ～ 1.99	0.44 ～ 2.9	0.3 ～ 2	0.01 ～ 0.05	3.3 ～ 12	5.1 ～ 6.8	0.03 ～ 3	0.03 ～ 3	0.1 ～ 3	3 ～ 20	3 ～ 16	0.3 ～ 3	0.03 ～ 3	0.5 ～ 3	3.1 ～ 15.5	2 ～ 12	2 ～ 20	3 ～ 12
Overall Length L(mm)	142	113 ～ 289.7	50 ～ 136	47 ～ 145	38	66 ～ 153	45 ～ 112	40 ～ 60	49 ～ 160	50 ～ 120	100 ～ 250	38	92 ～ 242	54 ～ 121	116 ～ 224	42 ～ 120	49 ～ 98	38 ～ 45	38 ～ 50	40 ～ 50	50 ～ 140	-	46 ～ 124	45 ～ 118	62 ～ 124	47 ～ 67	80 ～ 110	38 ～ 47	38 ～ 66	38	40	78 ～ 156	100 ～ 109	38 ～ 65	38 ～ 50	38	66 ～ 153	91 ～ 260	38	38 ～ 50	38 ～ 50	80 ～ 178	62 ～ 102	70 ～ 225	105 ～ 280
Groove Length L(mm)	-	51 ～ 107	18 ～ 76	1.65 ～ 88	1.2 ～ 12	20 ～ 101	8 ～ 55	-	15 ～ 96	6 ～ 33	14 ～ 90	6 ～ 12	38 ～ 176	18 ～ 71	42 ～ 117	12 ～ 76	12 ～ 55	1 ～ 15	0.2 ～ 25	6 ～ 25	10 ～ 88	16 ～ 43.2	12 ～ 77	12 ～ 71	20 ～ 77	6 ～ 27	36 ～ 53	2.5 ～ 15	6 ～ 34.8	1.5 ～ 10	0.06 ～ 0.3	32 ～ 96	44 ～ 56	0.6 ～ 40	0.3 ～ 25	0.6 ～ 12	28 ～ 101	42 ～ 207	4 ～ 10	0.3 ～ 25	5 ～ 24	22 ～ 102	14 ～ 55	18 ～ 160	55 ～ 215
work material	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	Cast Iron[○] / Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	Quenched and tempered steel[◎] / high hardness steel[○/◎] / Machinable Ceramics[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	high hardness steel[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	Quenched and tempered steel[○] / high hardness steel[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Stainless Steel[◎]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	Quenched and tempered steel[◎] / high hardness steel[◎]	Cast Iron[○] / Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎]	-	Aluminum[◎] / Copper[◎] / Graphite[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]
Shank Type	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	PCD	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
With/without Oil Hole	Available	Available	NA	NA	NA	NA	-	NA	NA	NA	Available / NA	NA	Available	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	NA	NA	NA	NA	Available	NA	NA	NA	Available	NA	Available	Available
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	NA	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	Available	Available	Available	NA	Available	NA	NA	NA	NA	Available	Available	Available	Available
Coating Type	Other	-	Other	Other	Other	Other	Other	-	Other	TiAlN	Other	TiAlN	Other	Dia Coat	Non-Coated	Other	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	Other	-	TiAlN	TiAlN	-	-	DLC	Other	Other	TiCN	-	Other	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	Other	-	-	-	-	Other	Other	Other	Other

1
2
3
4
Next >>

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.13
  - 0.135
  - 0.14
  - 0.145
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.984
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.383
  - 2.39
  - 2.4
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.439
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.489
  - 2.49
  - 2.5
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.578
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.642
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.705
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.779
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.947
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.048
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.455
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.571
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.658
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.734
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.039
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.176
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.217
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.366
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.623
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.763
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.837
  - 4.84
  - 4.85
  - 4.852
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.106
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.159
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.49999999999999
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.558
  - 5.56
  - 5.565
  - 5.57
  - 5.58
  - 5.59
  - 5.59999999999999
  - 5.6
  - 5.61
  - 5.616
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.69999999999999
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.79999999999999
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.89999999999999
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.954
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.95
  - 6
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.09999999999999
  - 6.1
  - 6.13
  - 6.15
  - 6.19999999999999
  - 6.2
  - 6.23
  - 6.25
  - 6.29999999999999
  - 6.3
  - 6.33
  - 6.35
  - 6.35 (¼")
  - 6.365
  - 6.375
  - 6.39999999999999
  - 6.4
  - 6.43
  - 6.45
  - 6.49999999999999
  - 6.5
  - 6.528
  - 6.53
  - 6.55
  - 6.59999999999999
  - 6.6
  - 6.63
  - 6.65
  - 6.69999999999999
  - 6.7
  - 6.73
  - 6.746
  - 6.75
  - 6.8
  - 6.83
  - 6.85
  - 6.89999999999999
  - 6.9
  - 6.93
  - 6.95
- 7～7.98
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.09999999999999
  - 7.1
  - 7.13
  - 7.14
  - 7.145
  - 7.19999999999999
  - 7.2
  - 7.23
  - 7.25
  - 7.29999999999999
  - 7.3
  - 7.33
  - 7.35
  - 7.36
  - 7.38
  - 7.39999999999999
  - 7.4
  - 7.43
  - 7.45
  - 7.49999999999999
  - 7.5
  - 7.52
  - 7.53
  - 7.54
  - 7.541
  - 7.55
  - 7.59999999999999
  - 7.6
  - 7.63
  - 7.69999999999999
  - 7.7
  - 7.73
  - 7.75
  - 7.79999999999999
  - 7.8
  - 7.83
  - 7.85
  - 7.89999999999999
  - 7.9
  - 7.93
  - 7.938
  - 7.94
  - 7.95
  - 7.953
  - 7.98
- 8～8.93
  - 8
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.09999999999999
  - 8.1
  - 8.13
  - 8.19999999999999
  - 8.2
  - 8.23
  - 8.25
  - 8.29999999999998
  - 8.3
  - 8.33
  - 8.334
  - 8.39999999999998
  - 8.4
  - 8.43
  - 8.433
  - 8.5
  - 8.50000000000001
  - 8.53
  - 8.58
  - 8.59999999999998
  - 8.6
  - 8.63
  - 8.69999999999998
  - 8.7
  - 8.73
  - 8.733
  - 8.75
  - 8.79999999999998
  - 8.8
  - 8.80000000000001
  - 8.83
  - 8.85
  - 8.89999999999998
  - 8.9
  - 8.90000000000001
  - 8.93
- 9～9.97
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.09999999999998
  - 9.1
  - 9.129
  - 9.13
  - 9.19999999999998
  - 9.2
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.29999999999998
  - 9.3
  - 9.30000000000001
  - 9.33
  - 9.347
  - 9.36
  - 9.38
  - 9.39999999999998
  - 9.4
  - 9.40000000000001
  - 9.43
  - 9.49999999999998
  - 9.5
  - 9.50000000000001
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.59999999999998
  - 9.6
  - 9.60000000000001
  - 9.63
  - 9.69999999999998
  - 9.7
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.79999999999998
  - 9.8
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.89999999999998
  - 9.9
  - 9.90000000000001
  - 9.92
  - 9.921
  - 9.93
  - 9.95
  - 9.97
- 10～10.93
  - 10
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.13
  - 10.2
  - 10.23
  - 10.25
  - 10.3
  - 10.32
  - 10.33
  - 10.4
  - 10.43
  - 10.5
  - 10.53
  - 10.6
  - 10.63
  - 10.7
  - 10.716
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.83
  - 10.85
  - 10.9
  - 10.93
- 11～11.95
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.113
  - 11.13
  - 11.133
  - 11.2
  - 11.22
  - 11.23
  - 11.24
  - 11.3
  - 11.33
  - 11.36
  - 11.38
  - 11.4
  - 11.43
  - 11.5
  - 11.509
  - 11.51
  - 11.53
  - 11.56
  - 11.6
  - 11.63
  - 11.7
  - 11.73
  - 11.8
  - 11.83
  - 11.85
  - 11.9
  - 11.908
  - 11.91
  - 11.93
  - 11.95
- 12～12.96
  - 12
  - 12.0 or more, less than 12.5
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.2
  - 12.3
  - 12.304
  - 12.4
  - 12.5
  - 12.5 or more, less than 13.0
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.9
  - 13
  - 13.096
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.43
  - 13.49
  - 13.5
  - 13.55
  - 13.6
  - 13.7
  - 13.8
  - 13.89
  - 13.891
  - 13.9
- 14～14.96
  - 14
  - 14.1
  - 14.2
  - 14.288
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.684
  - 14.7
  - 14.8
  - 14.9
  - 14.96
- 15～15.9
  - 15
  - 15.083
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.479
  - 15.5
  - 15.55
  - 15.6
  - 15.7
  - 15.8
  - 15.87
  - 15.875
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.271
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.463
  - 17.5
  - 17.55
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.258
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.654
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5/24.7
  - 24
  - 24.5
  - 24.5/24.7
- 25～25.5
  - 25
  - 25.5
- 26～26.5/26.7
  - 26
  - 26.5
  - 26.5/26.7
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30～30.5
  - 30
  - 30.5
- 31～31.5
  - 31
  - 31.5
- 32
- 32.5
- 33～33.5
  - 33
  - 33.5
- 34～34.5
  - 34
  - 34.5
- 35～35.5
  - 35
  - 35.5
- 36～36.5
  - 36
  - 36.5
- 37～37.5
  - 37
  - 37.5
- 38～38.5
  - 38
  - 38.5
- 39～39.5
  - 39
  - 39.5
- 40～40.5
  - 40
  - 40.5
- 41～41.5
  - 41
  - 41.5
- 42～42.5
  - 42
  - 42.5
- 43～43.5
  - 43
  - 43.5
- 44～44.5
  - 44
  - 44.5
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50
- 55
- 60
Drawing

Clear

Overall Length L(mm)
11

13

16

20

21

22

23

24

25

26

28

30

32

34

35

36

38

40

42

42.5

43

44

45

46

47

48

48.5

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

100

101

102

103

104

104.2

105

106

107

108

109

110

111

112

113

114

115

116

117

118

118.1

119

120

121

122

123

124

125

126

127

128

130

131

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

165

166

167

168

169

170

171

172

174

175

176

177

178

179

180

182

183

184

185

186

188

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

208

209

210

211

212

215

216

217

218

220

221

222

223

224

225

227

228

229

230

232

233

234

235

237

238

240

241

242

244

245

246

247

248

249

250

255

257

258

260

263

265

267

268

269

270

271

272

274

275

276

278

280

281

285

289.7

290

294

295

297

298

300

302

303

305

310

314

315

320

321

322

323

330

339

340

342

350

359

360

363

367

370

371

383

386

390

399

400

412

420

430

450

480

485

500

510

560

600

740

910

1080
Drawing

Clear

Groove Length L(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.9
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.4
  - 29
  - 29.3
  - 29.4
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.8
  - 32
  - 32.3
  - 32.4
  - 32.8
- 33～33.8
  - 33
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.2
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53～53.4
  - 53
  - 53.4
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 131
- 132
- 133
- 135
- 136
- 137
- 138
- 140
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 152
- 153
- 154
- 155
- 156
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 173
- 175
- 176
- 177
- 180
- 181
- 182
- 183
- 184
- 185
- 188
- 189
- 190
- 195
- 196
- 197
- 198
- 200
- 205
- 207
- 208
- 210
- 212
- 214
- 215
- 216
- 218
- 219
- 220
- 222
- 223
- 224
- 227
- 230
- 231
- 232
- 234
- 240
- 242
- 248
- 250
- 252
- 253
- 258
- 260
- 263
- 264
- 265
- 270
- 272
- 274
- 277
- 280
- 282
- 290
- 292
- 295
- 300
- 302
- 310
- 315
- 318
- 322
- 323
- 327
- 330
- 337
- 340
- 343
- 350
- 360
- 372
- 385
- 400
- 402
- 432
- 440
- 460
- 512
- 550
- 692
- 860
- 1030
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
Details

Clear

Shank Type
- End Mill Shank
- straight shank
- Taper shank
Images

Clear

Tool Material Type
- High-speed steel
- Carbide
- PCD
Details

Clear

With/without Oil Hole
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- Dia Coat
- Non-Coated
- Other
Details

Clear

Narrow search by specifying Manufacturer

- MISUMI (24)
- Economy series (0)
- OSG (31)
- NACHI(FUJIKOSHI) (20)
- ATOM (14)
- GUHRING (12)
- DIJET (11)
- IWATA TOOL (11)
- NS TOOL (10)
- KYOWA SEIKO (5)
- SUMITOMO ELECTRIC HARDMETAL (5)
- 7 LEADERS (3)
- OMIKOGYO (3)
- UNION TOOL (3)
- MITSUBISHI HITACHI TOOL (2)
- OKAZAKI SEIKO (2)
- SANDVIK (2)
- ASAHI TOOLS (1)
- FUKUDA (1)
- RYOCO SEIKI (1)
- WIDIA (1)
- MITSUBISHI MATERIALS (0)
- TUNGALOY (0)
- BOTEK (0)
- ISHIHASHI (0)
- EIKOSHA (0)
- DIXI (0)
- WIDIN (0)
- MAPAL (0)
- TOYO DRILL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Drills

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Carbide Drills（Shank Type：End Mill Shank）

Search by specifying the lower class category

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Drills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Carbide Drills（Shank Type：End Mill Shank）

Search by specifying the lower class category

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Drills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB