(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Screw-Hole-Related Tools(work material:Quenched and tempered steel (35 to 45 HRC))

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

      Fluteless Tap (X Performer)_S-XPF

        LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

          SG Spiral Tap SGSP

            TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

              CPM Spiral Tap_CPM-SFT

                Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                  Hand Taps for Hard-to-Machine Materials_EH-HT

                    Z-PROPremium Thread Mills_PRML

                      TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                        Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                          CPM Spiral Tap V Coated_VP-SFT

                            CPM Spiral Tap with Long Shank_CPM-LT-SFT

                              CPM Straight Flutes Tap_CPM-HT

                                Planet Cutter Series MC - Planet Cutter PNGT

                                  LH Spiral SYNCHRO Tap_HS-RFT

                                    LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

                                      Pointed Tap for Difficult-To-Cut Materials CPM-POT

                                        CPM Pointed Tap with Long Shank_CPM-LT-POT

                                          Taper Pipe Thread Tap TiN coated_TIN-TPT

                                            Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

                                              Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

                                                Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

                                                  CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

                                                    MMTS Micro Threading Tool

                                                      Epoch D Thread Mill EDT-□.□□-□□-TH

                                                        Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

                                                          Spiral Fluted Taps for Titanium Alloys_ZET-B

                                                            Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                                              Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

                                                                SG Point Tap SGPO

                                                                  Thread Cutting Tool (for Unified Threads) MMTU

                                                                  Brand

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  NACHI(FUJIKOSHI)

                                                                  MISUMI

                                                                  OSG

                                                                  OSG

                                                                  YAMAWA MFG

                                                                  YAMAWA MFG

                                                                  MISUMI

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  OSG

                                                                  NS TOOL

                                                                  MITSUBISHI HITACHI TOOL

                                                                  YAMAWA MFG

                                                                  YAMAWA MFG

                                                                  YAMAWA MFG

                                                                  YAMAWA MFG

                                                                  NACHI(FUJIKOSHI)

                                                                  NS TOOL

                                                                  Product Series

                                                                  CPM Fluteless (Nu-Roll) Tap V coated_VP-NRT

                                                                  Fluteless Tap (X Performer)_S-XPF

                                                                  LH Spiral SYNCHRO Tap with Long Shank_HS-LT-RFT

                                                                  SG Spiral Tap SGSP

                                                                  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                                                                  CPM Spiral Tap_CPM-SFT

                                                                  Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                                                  Hand Taps for Hard-to-Machine Materials_EH-HT

                                                                  Z-PROPremium Thread Mills_PRML

                                                                  TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                                                  Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                                                  CPM Spiral Tap V Coated_VP-SFT

                                                                  CPM Spiral Tap with Long Shank_CPM-LT-SFT

                                                                  CPM Straight Flutes Tap_CPM-HT

                                                                  Planet Cutter Series MC - Planet Cutter PNGT

                                                                  LH Spiral SYNCHRO Tap_HS-RFT

                                                                  LH Spiral SYNCHRO Tap with JIS Shank_J-HS-RFT

                                                                  Pointed Tap for Difficult-To-Cut Materials CPM-POT

                                                                  CPM Pointed Tap with Long Shank_CPM-LT-POT

                                                                  Taper Pipe Thread Tap TiN coated_TIN-TPT

                                                                  Taper Tap for Pipes TiN Coating, Short Screw TIN-S-TPT

                                                                  Taper Tap for Pipes For Difficult-to-Machine Materials CPM-TPT

                                                                  Taper Tap for Pipes Short Screws for Difficult-to-Machine Materials CPM-S-TPT

                                                                  CPM Taper Pipe Thread Tap with Long Shank (Short Thread)_CPM-LT-S-TPT

                                                                  MMTS Micro Threading Tool

                                                                  Epoch D Thread Mill EDT-□.□□-□□-TH

                                                                  Spiral Fluted Taps for Titanium Alloys, Through Hole Use (with LH Spiral Flutes)_ZET-P

                                                                  Spiral Fluted Taps for Titanium Alloys_ZET-B

                                                                  Carbide Thread Mills for Metric Internal Threads_MC-CSLC

                                                                  Spiral Pointed Taps for Hard-to-Machine Materials_EH-PO

                                                                  SG Point Tap SGPO

                                                                  Thread Cutting Tool (for Unified Threads) MMTU

                                                                  Days to Ship 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more Same day or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 2 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                  Specifications
                                                                                                                    • STOCK
                                                                                                                                Screw size (Nominal)No.2UN ~ M12M1 ~ M45M3 ~ M30M2 ~ M24M3 ~ M20M1.6 ~ M30-M3 ~ M83.5 ~ 9M2 ~ M12-M3 ~ M12M16M8 ~ M12-M3 ~ M14M3 ~ M14M1.4 ~ M14M8 ~ M12R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8S0.1 ~ S1.4M4 ~ M12M3 ~ M20M3 ~ M2006510X28R ~ 200505N300MM3 ~ M24M1.4 ~ M24NO.0-80UNF ~ 1/4-20UNC
                                                                                                                                Screw TypesMeter / unifiedMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter / unifiedMeterMeterMeterMeter / Taper for Pipe / Parallel for PipesMeterMeterMeterMeterTaper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeOtherMeterMeterMeterMeter / Taper for Pipe / Parallel for PipesMeterMeterunified
                                                                                                                                work materialQuenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[○]Quenched and tempered steel (35 to 45 HRC)[◎]
                                                                                                                                Pitch (P), Number of Threading(mm)0.25 ~ 560.2 ~ 4.50.5 ~ 3.50.25 ~ 30.5 ~ 2.50.35 ~ 3.50.5 ~ 30.5 ~ 1.250.75 ~ 1.750.4 ~ 1.750.4 ~ 320.5 ~ 1.7521.25 ~ 1.751 ~ 190.5 ~ 20.5 ~ 20.3 ~ 21.25 ~ 1.7511 ~ 2811 ~ 2811 ~ 2811 ~ 1911 ~ 280.025 ~ 0.30.7 ~ 1.750.5 ~ 2.50.5 ~ 2.50.5 ~ 30.5 ~ 30.25 ~ 3-
                                                                                                                                Tool Material TypePowder high-speed steelPowder high-speed steel / Vanadium High-Speed SteelVanadium High-Speed SteelAlloy HSSCarbidePowder high-speed steelCarbideCobalt HSSCarbideCarbideCarbidePowder high-speed steelPowder high-speed steelPowder high-speed steelCobalt HSSVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelVanadium High-Speed SteelVanadium High-Speed SteelPowder high-speed steelPowder high-speed steelPowder high-speed steelCarbideCarbidePowder high-speed steelPowder high-speed steelCarbideCobalt HSSHigh-speed steelCarbide
                                                                                                                                Tap TypeRoll tapRoll tapPoint tapSpiral TapThread cutterSpiral TapThread cutterHand TapThread cutterThread cutterThread cutterSpiral TapSpiral TapHand TapThread cutterPoint tapPoint tapPoint tapPoint tapTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesThread cutterThread cutterSpiral TapSpiral TapThread cutterPoint tapPoint tapThread cutter
                                                                                                                                Hole typeFor blind holeFor through hole / For blind holeFor through holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind holeFor blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through holeFor through holeFor through holeFor through holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole--For through holeFor blind holeFor through hole / For blind holeFor through holeFor through holeFor blind hole
                                                                                                                                Chamfer threads (Lcf)2P ~ 4P2P ~ 4P6P2.5-3P-2.5P ~ 5P---2.5P3P2P ~ 5P-6P5P5P5P2.5P2.5P2.5P2.5P2.5P--5P3P-4.5P5-
                                                                                                                                Coating TypeTiCNTiCNTiNTiCNTiAlNNon-CoatedTiAlN-OtherTiAlNFor High Hardness (Silicon Group) / OtherTiCNNon-CoatedNon-CoatedTiNTiNTiNNon-CoatedNon-CoatedTiNTiNNon-CoatedNon-CoatedNon-CoatedTiAlNFor High Hardness (Silicon Group)--TiAlN-TiCNTiAlN
                                                                                                                                Coating Y/NAvailableAvailableAvailableAvailableAvailableNAAvailableNAAvailableAvailableAvailableAvailableNANAAvailableAvailableAvailableNANAAvailableAvailableNANANAAvailableAvailableNANAAvailableNAAvailableAvailable
                                                                                                                                Overall Length (L)(mm)30 ~ 8230 ~ 220100 ~ 20040 ~ 12057 ~ 11536 ~ 13560 ~ 12046 ~ 70-58 ~ 734046 ~ 8215070 ~ 8280 ~ 21046 ~ 8846 ~ 8834 ~ 8815055 ~ 9555 ~ 9555 ~ 9562 ~ 95120 ~ 1504550 ~ 8046 ~ 10546 ~ 10550 ~ 14046 ~ 12034 ~ 12045

                                                                                                                                Loading...

                                                                                                                                1. 1

                                                                                                                                Related Categories to Screw-Hole-Related Tools