(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Screw-Hole-Related Tools(Tool Material Type:Carbide)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 9 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
Brand
Product Series
Days to Ship
Screw size (Nominal)
Screw Types
work material
Pitch (P), Number of Threading(mm)
Tool Material Type
Tap Type
Hole type
Chamfer threads (Lcf)
Coating Type
Coating Y/N
Overall Length (L)(mm)

    Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT

      Carbide Hand Tap

        Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

          Tungsten Carbide Straight Flutes Tap_OTT

            Planet Cutter Series Super Planet DR-PNAC

              Carbide Taps for Light Alloys_N-CT-LA

                Carbide Taps for Light Alloys_N-CT-FC

                  TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                    Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                      Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                        Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT

                          Grooveless Tap Series Carbide New Roll Tap OT-NRT

                            Tap remover Plus (long size)

                              Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                Tungsten Carbide Spiral Tap_OT-SFT

                                  Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT

                                    Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT

                                      Tap remover Plus (regular size)

                                        Carbide Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_CT-S-PT

                                          Carbide Taps for Parallel Pipe Threads_CT-PF

                                            Carbide Taps for Hard Materials_EH-CT

                                              Carbide taps for ultra hard materials_UH-CT

                                                Z-PROPremium Thread Mills_PRML

                                                  DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                                    TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                                      TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

                                                        TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                                          Carbide Spiral Tap

                                                            Excel Hand Tap EHT

                                                              Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                                                Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT

                                                                  Planet Cutter Series NC Planet Cutter WX-PNC

                                                                    Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT

                                                                      Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT

                                                                        Long Shank・with Interrupted Threads_EX-LT-IRT

                                                                          Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT

                                                                            Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT

                                                                              Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT

                                                                                Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT

                                                                                  Taper Tap for Pipes Taper Tap for Carbide Pipes OT-TPT

                                                                                    Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT

                                                                                      Tungsten Carbide Parallel Pipe Thread Tap_OT-SPT

                                                                                        Tungsten Carbide Parallel Pipe Thread Tap with Long Shank_OT-LT-SPT

                                                                                          Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

                                                                                            MMTS Micro Threading Tool

                                                                                            Brand

                                                                                            OSG

                                                                                            MISUMI

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            YAMAWA MFG

                                                                                            YAMAWA MFG

                                                                                            MISUMI

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            EIKOSHA

                                                                                            GUHRING

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            EIKOSHA

                                                                                            YAMAWA MFG

                                                                                            YAMAWA MFG

                                                                                            YAMAWA MFG

                                                                                            YAMAWA MFG

                                                                                            YAMAWA MFG

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            NS TOOL

                                                                                            Product Series

                                                                                            Tungsten Carbide Straight Flutes Tap for Hardened Steels (50 HRC〜)_VX-OT

                                                                                            Carbide Hand Tap

                                                                                            Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT

                                                                                            Tungsten Carbide Straight Flutes Tap_OTT

                                                                                            Planet Cutter Series Super Planet DR-PNAC

                                                                                            Carbide Taps for Light Alloys_N-CT-LA

                                                                                            Carbide Taps for Light Alloys_N-CT-FC

                                                                                            TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads

                                                                                            Planet Cutter Series Super Planet With Oil Hole DR-O-PNAC

                                                                                            Planet Cutter Series Planet Cutter For Steel With Oil Hole WXO-ST-PNC

                                                                                            Tungsten Carbide Taper Pipe Thread Tap for Hardened Steels_VX-TPT

                                                                                            Grooveless Tap Series Carbide New Roll Tap OT-NRT

                                                                                            Tap remover Plus (long size)

                                                                                            Thread Cutter for Blind Hole/Through Hole TM SP for 2×D 3737

                                                                                            Tungsten Carbide Spiral Tap_OT-SFT

                                                                                            Taper Pipe Thread Tap for Stainless Steels (Short Thread)_EX-SUS-S-TPT

                                                                                            Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT

                                                                                            Tap remover Plus (regular size)

                                                                                            Carbide Taps for Taper Pipe Threads, Short (ℓg) Type, for Cast Irons_CT-S-PT

                                                                                            Carbide Taps for Parallel Pipe Threads_CT-PF

                                                                                            Carbide Taps for Hard Materials_EH-CT

                                                                                            Carbide taps for ultra hard materials_UH-CT

                                                                                            Z-PROPremium Thread Mills_PRML

                                                                                            DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

                                                                                            TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

                                                                                            TiAlN Coated Carbide Threading Cutter for Inner Diameter Metric Threads (manufactured by Carmex)

                                                                                            TS Coated Carbide Threading Cutter, for Internal Metric Threads

                                                                                            Carbide Spiral Tap

                                                                                            Excel Hand Tap EHT

                                                                                            Planet Cutter Series Small Diameter Planet Cutter WH-VM-PNC

                                                                                            Tungsten Carbide Straight Flutes Tap for Hardened Steels (〜 55 HRC)_WH55-OT

                                                                                            Planet Cutter Series NC Planet Cutter WX-PNC

                                                                                            Taper Tap for Pipes TiN Coating, Interlapped Type TIN-IRT

                                                                                            Taper Pipe Thread Tap TiN coated with Interrupted Threads (Short Thread)_TIN-S-IRT

                                                                                            Long Shank・with Interrupted Threads_EX-LT-IRT

                                                                                            Taper Pipe Thread Tap with Interrupted Threads (Short Threads)_EX-S-IRT

                                                                                            Long Shank・with Interrupted Threads(Shot Thread)_EX-LT-S-IRT

                                                                                            Taper Pipe Thread Tap for Stainless Steels with Long Shank_LT-SUS-TPT

                                                                                            Taper Pipe Thread Tap for Stainless Steels with Long Shank (Short Thread)_LT-SUS-S-TPT

                                                                                            Taper Tap for Pipes Taper Tap for Carbide Pipes OT-TPT

                                                                                            Taper Tap for Pipes Taper Tap Short Screws for Carbide Pipes OT-S-TPT

                                                                                            Tungsten Carbide Parallel Pipe Thread Tap_OT-SPT

                                                                                            Tungsten Carbide Parallel Pipe Thread Tap with Long Shank_OT-LT-SPT

                                                                                            Grooveless Tap Series Carbide New Roll Tap, Long Shank OT-LT-NRT

                                                                                            MMTS Micro Threading Tool

                                                                                            Days to Ship 2 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) or more 2 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 27 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 10 Day(s) or more 10 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 2 Day(s) or more 2 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more
                                                                                            Screw size (Nominal)M2 ~ M20M3 ~ M10M3 ~ M20M1.4 ~ M20M6 ~ M12M1.4 ~ M20No.10-32UNF ~ M24M3 ~ M20M6 ~ M12-R1/2 ~ R3/8M3 ~ M12M3 ~ M12M6 ~ M20M3 ~ M12R1 ~ R3/8R1/2 ~ R3/8M3 ~ M241/2-14 ~ 3/8-191'-11 ~ 3/8-19M3 ~ M12M2 ~ M203.5 ~ 9M3 ~ M16M2 ~ M12M1.4 ~ M20M3 ~ M12M3 ~ M10M3 ~ M12-M3 ~ M12-R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1/2 ~ R3/8R1/2 ~ R3/8R1/2 ~ R3/8R1/2 ~ R3/8G1/2 ~ G3/8G1/2 ~ G3/8M3 ~ M12S0.1 ~ S1.4
                                                                                            Screw TypesMeterMeterMeterMeterMeterMeterMeter / unifiedMeterMeterMeterTaper for PipeMeter-MeterMeterTaper for PipeTaper for Pipe-Taper for PipeParallel for PipesMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter / unifiedMeterMeter / unified / Taper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeTaper for PipeParallel for PipesParallel for PipesMeterOther
                                                                                            work materialHigh Hardness Steel (50-60 HRC)[◎]Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]High Hardness Steel (50-60 HRC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]--Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]-Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Quenched and tempered steel (45 to 55 HRC)[○]High Hardness Steel (50-60 HRC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Quenched and tempered steel (45 to 55 HRC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless steel (SUS)[◎] / Cast Iron (FC)[○]Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Stainless steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]
                                                                                            Pitch (P), Number of Threading(mm)0.4 ~ 2.50.5 ~ 1.50.5 ~ 2.50.3 ~ 2.51 ~ 1.750.3 ~ 2.50.3 ~ 30.5 ~ 2.51 ~ 1.750.5 ~ 314 ~ 280.5 ~ 1.75-1 ~ 2.50.5 ~ 1.7511 ~ 2814 ~ 28---0.5 ~ 1.750.4 ~ 2.50.75 ~ 1.750.5 ~ 20.4 ~ 1.750.3 ~ 2.50.5 ~ 1.750.5 ~ 1.50.5 ~ 1.750.25 ~ 320.5 ~ 1.751 ~ 2811 ~ 2811 ~ 2811 ~ 2811 ~ 2811 ~ 2814 ~ 2814 ~ 2814 ~ 2814 ~ 2814 ~ 2814 ~ 280.5 ~ 1.750.025 ~ 0.3
                                                                                            Tool Material TypeCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide
                                                                                            Tap TypeHand TapHand TapHand TapHand TapThread cutterHand TapHand TapThread cutterThread cutterThread cutterTap for pipesRoll tapModification/removal ToolThread cutterSpiral TapTap for pipesTap for pipesModification/removal ToolTap for pipesTap for pipesPoint tapPoint tapThread cutterThread cutterThread cutterThread cutterThread cutterSpiral TapHand TapThread cutterHand TapThread cutterTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesTap for pipesRoll tapThread cutter
                                                                                            Hole typeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole-For through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind holeFor through hole / For blind hole-
                                                                                            Chamfer threads (Lcf)3P1.5P ~ 3P1.5P ~ 3P1.5P ~ 3P-1.5P ~ 5P1.5P ~ 3P---3P2P--1.5P ~ 2.5P2.5P2.5P-2.5P3.5P5P5P-----1.5P ~ 2.5P1.5P ~ 3P-2.5P ~ 5P-2.5P2.5P2.5P2.5P2.5P2.5P2.5P2.5P2.5P3P3P2P-
                                                                                            Coating TypeTiCN / Other-Non-CoatedNon-CoatedTiAlN--TiAlNTiAlNTiAlNTiCNNon-CoatedOtherTiCNNon-CoatedNon-CoatedNon-CoatedOther--TiAlNTiAlNOtherDLCTiAlNTiAlNFor High Hardness (Silicon Group)-TiCNFor High Hardness (Silicon Group) / OtherTiCNTiAlNTiNTiNNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiAlN
                                                                                            Coating Y/NAvailableNANANAAvailableNANAAvailableAvailableAvailableAvailableNAAvailableAvailableNANANAAvailableNANAAvailableAvailableAvailableAvailableAvailableAvailableAvailableNAAvailableAvailableAvailableAvailableAvailableAvailableNANANANANANANANANANAAvailable
                                                                                            Overall Length (L)(mm)40 ~ 10546 ~ 75100 ~ 15034 ~ 10562 ~ 8934 ~ 10534 ~ 12057 ~ 11562 ~ 8960 ~ 12059 ~ 8746 ~ 8240 ~ 8054 ~ 10246 ~ 8255 ~ 95100 ~ 15040 ~ 12055 ~ 8055 ~ 9546 ~ 8240 ~ 105-57 ~ 9258 ~ 7339 ~ 10548 ~ 7446 ~ 7546 ~ 824046 ~ 8260 ~ 12055 ~ 9555 ~ 95120 ~ 15055 ~ 95120 ~ 150100 ~ 150100 ~ 15055 ~ 8055 ~ 8055 ~ 80100 ~ 150100 ~ 15045

                                                                                            Loading...

                                                                                            Related Categories to Screw-Hole-Related Tools