(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Screw-Hole-Related Tools（Coating Y/N：NA）
Search by specifying the lower class category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Days to Ship |
|
|---|
-
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.Days to Ship: Same day or more -
Spiral Tap for General Application_EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
Days to Ship: 2 Day(s) or more -
OSG
High-speed steel hand tap.
Work material: Magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible- Volume Discount
- STOCK
Days to Ship: Same day or more -
YAMAWA MFG
[Features]
· A common tap that's used in various applications.- STOCK
Days to Ship: 1 Day(s) or more -
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]
·General-purpose uncoated type high-speed steel hand tap
·High versatility, suitable for a variety of applications and work materials such as aluminum and general steel- Volume Discount
Days to Ship: Same day or more -
Taper Tap for Pipes General Use TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
Days to Ship: 2 Day(s) or more -
Parallel Tap for Pipes General Use SPT
OSG
Used to process parallel female threads for tapered pipe threads and female threads for parallel pipe threads.
Days to Ship: 2 Day(s) or more -
Hand Taps for Stainless Steels_SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.Days to Ship: 1 Day(s) or more -
YAMAWA MFG
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.- Volume Discount
Days to Ship: Same day or more -
Tap For Parallel Pipe Thread (PS Screw)
TRUSCO NAKAYAMA
[Features]
· Tap for parallel pipe thread.
[Applications]
· Work materials: cast iron, light metals.- STOCK
Days to Ship: 1 Day(s) -
Plus Series Spiral Fluted Taps_+SP
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).Days to Ship: Same day or more -
Hand Taps for Taper Pipe Threads, Long (ℓg) Type_PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
Days to Ship: 1 Day(s) -
Spiral Fluted Taps for Stainless Steels_SU+SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.Days to Ship: Same day or more -
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.Days to Ship: Same day or more -
Solid Round Dies for Taper Pipe Threads_D-PT
YAMAWA MFG
A solid die for machining PT male threads with improved runout accuracy.
Days to Ship: 16 Day(s) or more -
Pointed Tap Series, General Purpose EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
- STOCK
Days to Ship: Same day or more -
Spiral Tap for Aluminum_EX-AL-SFT
OSG
Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.
- STOCK
Days to Ship: Same day or more -
Spiral Tap for Stainless Steels_EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
- STOCK
Days to Ship: Same day or more -
Spiral Tap General Purpose, Long Shank EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
Days to Ship: 16 Day(s) or more -
Hand Taps for Left Hand Threads_HT-LH
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: 16 Day(s) or more -
Spiral Fluted Taps for Soft Structural Steels_E-SP
YAMAWA MFG
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
Days to Ship: 1 Day(s) or more -
Tap For Tapered Pipe Thread (PT Screw)
TRUSCO NAKAYAMA
[Features]
· Tap for tapered pipe thread.
[Applications]
· Work materials: cast iron, light metals.- STOCK
Days to Ship: Same day or more -
Tap For Parallel Pipe Thread (PF Screw)
TRUSCO NAKAYAMA
[Features]
· Tap for parallel pipe thread.
[Applications]
· Work materials: cast iron, light metals.- STOCK
Days to Ship: 1 Day(s) -
Solid Round Dies for Left Hand Threads_D-LH
YAMAWA MFG
A solid die for machining left-hand threads with improved run-out accuracy.
Days to Ship: 12 Day(s) or more -
Spiral Tap for General Application (with OX)_EX-H-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
- STOCK
Days to Ship: 1 Day(s) or more -
Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT
OSG
Suitable for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, aluminum alloy casting, etc., using a high-precision automatic machine.
Days to Ship: 16 Day(s) or more -
Short Spiral Fluted Taps, Deep Hole Use_S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.Days to Ship: 1 Day(s) or more -
Hand Taps for Hard-to-Machine Materials_EH-HT
YAMAWA MFG
Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.
Days to Ship: 8 Day(s) or more -
Hand Tap Set (for Metric Screws / SKS)
TRUSCO NAKAYAMA
[Features]
· For creating and refining (making clean) screw holes.
· For creating and modifying coarse screw threads.
· Tungsten hand tap set.
[Applications]
· Work materials: iron, light metals.
· For creating and modifying coarse screw threads.
[Materials]
· Low alloy steel (SKS)- STOCK
Days to Ship: 1 Day(s) -
Hand Tap/Die Set (for Metric Screws)
TRUSCO NAKAYAMA
[Features]
· It is a set of hand-taps from M3 to M16, 38-diameter circular dies, tap handle, tap holder and die handle that can be used to make and clean coarse threaded holes and threads.
· A set item convenient for storage.
[Applications]
· Work materials: Iron, light metal.
· Creation and correction of coarse screw threads.
[Material]
· Low Alloy Steel (SKS)- STOCK
Days to Ship: 1 Day(s) -
Solid Round Dies for American Taper Pipe Threads_D-NPT
YAMAWA MFG
A solid die for machining tapered male threads for American pipes with improved runout accuracy.
Days to Ship: 12 Day(s) or more -
High-Speed Steel Point Tap【10 Pieces Per Package】
MISUMI
[Features]
·High-speed steel uncoated spiral point tap
·Can be used for through hole machining
·Effective for work materials with continuous cutting chip such as carbon steel and steel alloy- Volume Discount
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Straight Flutes Tap_OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: 2 Day(s) or more -
Taper Tap for Pipes Spiral Tap SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
Days to Ship: 16 Day(s) or more -
Grooveless Tap Series Carbide New Roll Tap OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
Days to Ship: 16 Day(s) or more -
Hand Tap Set (for Metric Screws/HSS-E)
TRUSCO NAKAYAMA
[Features]
· Can be used for both through holes and blind holes.
· It is a high-speed steel (HSS-E) tap set.
[Applications]
· Work materials: General steel, low/medium carbon steel, alloy steel.- STOCK
Days to Ship: Same day or more -
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.Days to Ship: 16 Day(s) or more -
Solid Round Dies for Left Hand Threads_D-LH
YAMAWA MFG
Solid die for left-handed threads with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The rear is sunk so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Enables hand turned use or use with machinery.
· Solves problems particular to adjustable type dies, realizing high precision male screw machining.
[Applications]
· Ideal for male thread machining with iron or light metals.Days to Ship: 12 Day(s) or more -
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Days to Ship: 16 Day(s) or more -
Tungsten Carbide Straight Flutes Tap with Long Shank_LT-OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
Days to Ship: 16 Day(s) or more -
Hand Tap / Drill Set【21 Pieces Per Package】
ISHIHASHI
Set of 14 Medium Hand Taps and 7 Pilot Hole Drills in Case
- STOCK
Days to Ship: 1 Day(s) -
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
Days to Ship: 35 Day(s) -
Hand Taps for Parallel Pipe Threads_PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Days to Ship: 1 Day(s) -
Long Shank Hand Taps for Parallel Pipe Threads_LS-PS
YAMAWA MFG
The parallel thread type is used for machining parallel threads used for ordinary mechanical connection when connecting pipes and piping parts.
Days to Ship: 8 Day(s) or more -
Carbide Taps for Parallel Pipe Threads_CT-PS
YAMAWA MFG
With the main purpose of this product to provide tightness of thread section in the connection of pipe parts, etc., this is a hand tap for carbide parallel pipe threads suitable for mass-production with hard and brittle materials such as cast iron. The machined PS female threads are used to mate with PT male threads. [Features]·Chamfer 3.5P; straight groove shape carbide hand tap.
Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Screw size (Nominal) |
| Screw Types |
| work material |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Chamfer threads (Lcf) |
| Coating Type |
| Coating Y/N |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | OSG | OSG | YAMAWA MFG | MISUMI | OSG | OSG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YAMAWA MFG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | YAMAWA MFG | MISUMI | OSG | OSG | OSG | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | MISUMI | OSG | ISHIHASHI | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | Tungsten Carbide Taper Pipe Thread Tap with Long Shank_OT-LT-TPT | ||||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | Same day or more | 2 Day(s) or more | Same day or more | 1 Day(s) or more | Same day or more | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | Same day or more | 1 Day(s) | Same day or more | 1 Day(s) | Same day or more | Same day or more | 16 Day(s) or more | Same day or more | Same day or more | Same day or more | 16 Day(s) or more | 16 Day(s) or more | 1 Day(s) or more | Same day or more | 1 Day(s) | 12 Day(s) or more | 1 Day(s) or more | 16 Day(s) or more | 1 Day(s) or more | 8 Day(s) or more | 1 Day(s) | 1 Day(s) | 12 Day(s) or more | 16 Day(s) or more | 2 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | Same day or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 1 Day(s) | 35 Day(s) | 1 Day(s) | 8 Day(s) or more | 12 Day(s) or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||
| Screw size (Nominal) | No.10 ～ M13 | No.4UN ～ M36 | No.0UN ～ M39 | M33 ～ M48 | M3 ～ M10 | R1 ～ R5/8 | G1 ～ G7/8 | M3 ～ M10 | M1 ～ M50 | 1 ～ 3/8 | M2 ～ M6 | 1/2-14 ～ 3/8-19 | No.10 ～ M45 | 1 1/4 ～ M36 | 1 ～ 7/8 | No.10UN ～ M36 | M3 ～ M8 | No.5UN ～ M27 | M2.5 ～ M20 | M2.5 ～ M8 | M3 ～ M24 | 1 ～ 3/8 | 1 ～ 3/8 | 1/2 ～ 9/16 | M1 ～ M42 | R1/2 ～ R3/8 | M2 ～ M45 | M3 ～ M8 | M12 ～ M30 | - | 1 ～ 3/8 | M2 ～ M12 | M1.4 ～ M20 | R1 ～ R3/8 | M3 ～ M12 | M3 ～ M16 | No.6 | M1 ～ M48 | M2 ～ M24 | M3 ～ M20 | - | M30 | 1/2 ～ 1/4 | 1/2 ～ 1/4 | 1'-11 ～ 3/8-19 |
| Screw Types | Meter / unified / Sewing Machine | Meter / unified | Meter / unified / Whitworth / Sewing Machine | Meter | Meter | Taper for Pipe | Parallel for Pipes | Meter / Whitworth | Meter | Parallel for Pipes | Meter | Taper for Pipe | Meter / unified / Whitworth | Meter / unified / Whitworth | Taper for Pipe | Meter / unified / Whitworth / Sewing Machine | Meter | Meter / unified / Whitworth | Meter | Meter | Meter | Taper for Pipe | Parallel for Pipes | unified | Meter | Taper for Pipe | Meter | Meter | Meter | Meter | Taper for Pipe | Meter | Meter | Taper for Pipe | Meter | Meter | unified | Meter | Meter | Meter | - | Meter | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | - | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless steel (SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] | Stainless steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless steel (SUS)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○/◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] | - | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless steel (SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Pitch (P), Number of Threading(mm) | 0.35 ～ 40 | 0.35 ～ 40 | 0.25 ～ 80 | 3.5 ～ 5 | 0.5 ～ 1.5 | 11 ～ 28 | 11 ～ 28 | 0.5 ～ 1.5 | 0.2 ～ 5 | - | 0.4 ～ 1 | - | 0.3 ～ 56 | 0.4 ～ 28 | 11 ～ 28 | 0.3 ～ 44 | 0.5 ～ 1 | 0.45 ～ 40 | 0.45 ～ 2 | 0.45 ～ 0.75 | 0.5 ～ 3 | - | - | 9 ～ 28 | 0.25 ～ 4.5 | 14 ～ 28 | 0.4 ～ 4.5 | 0.5 ～ 1.25 | 1.25 ～ 3.5 | - | 11.5 ～ 27 | 0.4 ～ 1.75 | 0.3 ～ 2.5 | 11 ～ 28 | 0.5 ～ 1.75 | 0.5 ～ 2 | 32 | 0.25 ～ 5 | 0.4 ～ 3 | 0.5 ～ 2.5 | - | 3.5 | 14 ～ 19 | 14 ～ 19 | - |
| Tool Material Type | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | SKS | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | High-speed steel | SKS | SKS | High-speed steel | Vanadium High-Speed Steel | Carbide | High-speed steel | Cobalt HSS | SKS | - | High-speed steel | Vanadium High-Speed Steel | Carbide | High-speed steel | Carbide | High-speed steel | High-speed steel | High-speed steel | Cobalt HSS | Carbide | - | High-speed steel | High-speed steel | High-speed steel | Carbide |
| Tap Type | Hand Tap | Spiral Tap | Hand Tap | Hand Tap | Hand Tap | Tap for pipes | Tap for pipes | Hand Tap | Die | Tap for pipes | Spiral Tap | Tap for pipes | Spiral Tap | Spiral Tap | Die | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Tap for pipes | Tap for pipes | Die | Spiral Tap | Tap for pipes | Spiral Tap | Hand Tap | Hand Tap | Hand Tap | Die | Point tap | Hand Tap | Tap for pipes | Roll tap | Hand Tap | Die | Die | Point tap | Hand Tap | Thread-cutting-related tool | Hand Tap | Tap for pipes | Tap for pipes | Tap for pipes |
| Hole type | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | - | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole | - | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - | - | For through hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5P ～ 3P | 1.5P ～ 9P | 1.5P ～ 5P | 1.5P ～ 9P | 2.5P | 4P | 1.5P ～ 4P | - | 4.5P | 2.5P | 2.5P | 2.5P | 2.5P | - | 5P | 2.5P | 2.5P | 2.5P | 5P | 2.5P | 1.5P | 4.5P | - | 2.5P ～ 3P | 2.5P | 2.5P | 2.5P ～ 5P | - | - | - | 5P | 1.5P ～ 3P | 2.5P | 2P | - | - | - | 5P | 1.5P ～ 3P | - | 5P | 3.5P | 3.5P | 3.5P |
| Coating Type | - | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | - | - | - | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | Non-Coated | Non-Coated | - | - | - | - |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Overall Length (L)(mm) | 36 ～ 105 | 36 ～ 155 | 30 ～ 165 | 145 ～ 185 | 46 ～ 75 | 55 ～ 109 | 55 ～ 109 | 46 ～ 75 | - | 55 ～ 120 | 42 ～ 62 | 55 ～ 85 | 36 ～ 180 | 42 ～ 155 | - | 34 ～ 155 | 46 ～ 70 | 44 ～ 130 | 80 ～ 250 | 46 ～ 70 | 46 ～ 120 | 55 ～ 120 | 55 ～ 120 | - | 30 ～ 175 | 100 ～ 150 | 42 ～ 180 | 46 ～ 70 | 80 ～ 135 | - | - | 40 ～ 82 | 34 ～ 105 | 55 ～ 95 | 46 ～ 82 | 46 ～ 95 | - | - | 40 ～ 120 | 100 ～ 150 | - | 300 | 62 ～ 80 | 100 ～ 150 | 55 ～ 95 |
Loading...
Configure
Specification/Dimensions
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No.0UN
- NO.0-80UNF
- NO.10
- No.10
- No.1UN
- No.10UN
- No.10UNJ
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12UN
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- No.2UN
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- No.3UN
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- NO.4
- No.4
- No.4UN
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- No.5UN
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- No.6UN
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- No.8UN
- No.8UNJ
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- PF1
- PT1
- R1
- Rp1
- S1
- UNC1
- UNF1
- W1
- 1'-11
- 1-8UNC
- 1 1/2
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- W1"1/2
- 1 1/2-8UN
- 1 1/4
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2PF
- 1/2UN
- 1/2UNJ
- 1/2W
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC1/2
- UNF1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- 1/4UNJ
- 1/4W
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC1/4
- UNF1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- W1"5/8
- 1 5/8-8UN
- M1 to 6
- M1～6
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- 1/8PT
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PS1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- M1 to 10
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- M1.2
- S1.2
- 1.25
- M1.4
- S1.4
- 1.5
- M1.6
- M1.7
- M1.8
- 2
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- R2
- W2
- 2-8UN
- W2"1/4
- M2 to 4.5
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- M3
- M3.0
- 3/4
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- R3/4
- Rp3/4
- UNC3/4
- UNF3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- M3～5
- 3/8
- 3/8-UNJ
- 3/8UN
- 3/8W
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PS3/8
- PT3/8
- R3/8
- Rc3/8
- Rp3/8
- SM3/8
- UNC3/8
- UNF3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 to 10
- 3/16
- SM3/16
- W3/16
- SM3/32
- 3.5
- M3.5
- 4
- 4M
- M4
- M4.0
- M4 to 6
- M4 to 13
- M4.5
- 5M
- M5
- M5.0
- M5
- 5/8
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- UNC5/8
- UNF5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- M5 to 10
- M5 to 13
- 5/16
- 5/16UN
- 5/16UNJ
- 5/16W
- SM5/16
- UNC5/16
- UNF5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5.5M
- M5.5
- 6
- M6
- M6.0
- No6-40UNF
- M6 to 20
- M7
- PG7
- 7/8
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- UNC7/8
- UNF7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- 7/16UNJ
- SM7/16
- UNC7/16
- UNF7/16
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- 7.5
- M8
- TV8
- 9
- M9
- PG9
- 9/16
- 9/16UN
- W9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- 9/64
- SM9/64
- M10
- M10
- M10 to 13
- M10 to 25
- M11
- PG11
- SM11/32
- SM11/64
- M12
- M12
- M13
- PG13.5
- M14
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M19 to 32
- M19 to 38
- M20
- M21
- PG21
- M22
- M22X
- M23
- M24
- M24X
- M25
- M25X
- M25 to 50
- M25 to 70
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M48
- M50
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Screw Types
- Meter
- unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless steel (SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Pitch (P), Number of Threading(mm)
- .02
- 0.025
- 0.05
- 0.08
- 0.1
- 0.125
- 0.15
- 0.175
- 0.2
- 0.225
- 0.25
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.529
- 0.6
- 0.63
- 0.7
- 0.75
- 0.75、1.00、1.25、1.50、1.75、2.00、2.50、3.00
- 0.79
- 0.794
- 0.8
- 0.9
- 0.907
- 0.974
- 1
- 1.058
- 1.25
- 1.27
- 1.5
- 1.75
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 10、11、12、14、16、18、20、24F
- 11
- 11 1/2
- 11.5
- 12
- 13
- 14
- 16
- 18
- 19
- 20
- 24
- 27
- 28
- 32
- 36
- 40
- 44
- 48
- 56
- 64
- 72
- 80
- 150
-
Tool Material Type
-
Tap Type
-
Hole type
-
Chamfer threads (Lcf)
-
Coating Type
-
Coating Y/N
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- OSG (95)
- YAMAWA MFG (67)
- TRUSCO NAKAYAMA (16)
- ISHIHASHI (10)
- NACHI(FUJIKOSHI) (7)
- DC SWISS (4)
- ONISHI MANUFACTURING (2)
- RUKO (1)
- SKC (1)
- NOGA JAPAN (0)
- NS TOOL (0)
- H & H (0)
- KANETEC (0)
- KOKEN (0)
- NIIGATA SEIKI (SK) (0)
- NEW STRONG (0)
- HITACHIKOKI (0)
- KO-KEN TOOL (0)
- TSUBOSAN (0)
- MITSUBISHI HITACHI TOOL (0)
- ENGINEER (0)
- RENNSTEIG (0)
- UNION TOOL (0)
- GUHRING (0)
- SANDVIK (0)
- TANOI MFG (0)
- EIKOSHA (0)
- ESCO (0)
- LIGHTSEIKI (0)
CAD
-
- 2D
- 3D
Related Categories to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy